Monday, 26 September 2011
Many among we 'Bessler's wheel' researchers have our own pet theories about different aspects of our self-appointed task, and they can be as diverse as the numbers of people involved. So it comes as no surprise to find my own theories treated with as much indifference as I treat many other people's - no offence intended and none taken. But one theory I have subscribed to, among a couple of others, for most of my life is the one about the pendulums indicated in two of Bessler's drawings; I refer to the drawing in Grundlicher Bericht published December 1715 and the one in Das Triumphirende published in October 1719. Both depict Bessler's Merseberg wheel and include a complex pendulum and according to Bessler they could be used to regulate the speed but, if not required, could be dispensed with. However as at least two reports comment on the extreme eveness and regularity of rotation of the wheels, there seems little or no requirement for their use.
My very first thought was that they were included to add interest to what was after all, pictorially a pretty dull subject matter without them. This thought was supported by the later drawings in Das Triumphirende which show an archimedes screw being turned. However not content with that drawing, Bessler also added another one which shows a large triangular pendulum with three bobs. As we have already dismissed the need for pendulums to regulate the wheel's speed why would he include yet another one, four years after the first?
I therefore dismissed the idea that they were there as mere decoration. I took the view that they were intended to convey information about the inner structure of the wheel; the mechanism in fact. I have expressed this thought elsewhere but my opinion has been largely ignored and it seems that most people attempt to make the case for their use as governors, something I would argue against.
Following my belief in the true purpose of the pendulums, I have over the years, played with a number of mechanisms designs loosely based on the pendulms, several with interesting properties, but nothing that subscribed to the concept which I have favoured for some years now - the actual way that gravity alone was able to drive Bessler's wheel.
But, as I've been unable to get on with my Bessler wheel experiments for the last few weeks, due to other commitments, I have been restricted to just thinking about it and studying the drawings - and I think I have discovered something interesting in his main wheel drawing. It's extremely obscure and I'm fairly confident that you are unlikely to find it unless you've followed my own train of thought over the last three or four years. Having said that I wouldn't be surprised to learn that others have made the same connection, but I should think that if I am right then so should they be and therefore we would surely have heard about it by now - in which case either I'm wrong about this particular aspect of ther drawing - or no one else has made the connection.
I hope to make an experimental mechanism to test my thinking next week and if it works I'll follow it up with a full prototype - and that may test my basic hypothesis to destruction!
Sunday, 18 September 2011
I'd be interested to know how people became aware of, and interested in, Johann Bessler.
I fear that the enthusiasm for Bessler's wheel is waining. I don't mean those who are already 'on board' so to speak but 'newbies' seem to be few and far between. I note that the majority of those who frequent the websites devoted to Bessler with an open mind are retired or approaching retirement, I apologise to those to whom retirement is still a long way off, but there does seem to be a lack of interest in this puzzle among younger people. I assume it has something to do with the public perception of 'perpetual motionists', as we are seen to be. The facts about Bessler are completely swamped by negative opinion and a humorous/scornful approach to descriptions of those who are dedicated to finding his solution.
When I began this journey in 1997, by publishing "Perpetual Motion; An Ancient Mystery Solved?", I was pleasantly surprised by the amount of interest worldwide, I don't mean that it became an instant best seller (I wish!!!) but there were emails from all around the world and lots of interest from academics as well as engineers and people from many varied professions and as well as educated amateurs. Now there is nothing. I see that posts on the forum have largely dropped to armchair discussions - few people have any input on possible solutions any more. Do we think we have we exhausted every possible concept or design? I know I haven't and in fact I'm working on something that I feel more confident about than I have for some time.
Of course I was helped in the early days by articles about my book, appearing in Nexus magazine, Infinite Energy magazine, the Journal of Free Enery and others. This may have triggered interest in my book - I don't know. But I do think that this subject does not appeal to younger people and I regret that. When you look back at the history of great scientific discoveries, many were made by people in their intellectual prime, usually their twenties and thirties, and the majority were not 'professional' scientists but educated amateurs. Some, such as Michael Faraday, had only the most basic education yet his achievements in the fields of chemistry, electricity and magnetism were huge. I feel that we need to find some way of attracting the interest of younger people to inject some new thinking into this ancient topic.
When I finally get around to finishing my book on Bessler I will court the advertising media again as I did in 1997 but I have nothing to offer them at this point so there is nothing to new to engage them. I don't know how we can engender new interest but we must keep trying.
PS. Note the American spelling in the title - I love all those 'z's! As did Bessler.
Wednesday, 14 September 2011
Recently I said that I would comment occasionally on one or two of Bessler's clues, so here is another one I've been working on. This one is my interpetation of the strange passage which follows:
“He will be called a great craftsman,
who can easily/lightly throw a heavy thing high,
if one pound falls a quarter,
it shoots four pounds, four quarters high.”
Firstly, the most obvious point is that if one pound falls a quarter and lifts another four pounds then we have a total of five pounds and those who are familiar with my work in decoding Bessler’s clues will at once recognise the presence of the ubiquitous number 5 again - which I have suggested refers to five mechanisms.
Secondly, he implies that there are five one pound weights (one plus four), but one of them is falling. Since one of the falling weights is one pound and the other four being lifted are also one pound each, all five of them are of equal mass - one pound each.
Thirdly it follows that if one of the weights was falling and four were rising, then there were either five one pound weights in total, alternately falling and being lifted again - or there were ten one pound weights, operating in pairs within the five mechanism, five falling and five rising. I suggest that there were in fact five pairs of similar weights, and the reason I think this, is because elsewhere he says,
“... a work of this kind of craftsmanship has, as its basis of motion, many separate pieces of lead. These come in pairs, such that, as one of them takes up an outer position, the other takes up a position nearer the axle. Later, they swap places, and so they go on and on changing places all the time.”
This description supports my contention that there must have been ten one pound weights operating in five pairs.
Fourthly, if "..it shoots four pounds, four quarters high,” then one pound is shot one quarter high, which is no big deal from a similar weight falling the same distance.
Fifthly, "...if one pound falls a quarter, " it means it falls 90 degrees. If a pendulum is placed upside down against a clock face with the weight at twelve o'clock, then it can only fall in total, 180 degrees, or half way around the clock to the six o'clock point. If it falls a quarter then it only falls from twelve o'clock to three o'clock, 90 degrees.
It should be also be remembered that when the bi-directional Kassel wheel was started from a stand still it required only the smallest of pushes from two fingers for it to begin to accelerate, BUT it was also reported that rotation did not begin until a single weight was heard to fall, hence the phrase "...if one pound falls..." , meaning that it only takes one pound weight to fall for the whole wheel to begin to rotate and therefore cause the other weights to move.
There is one more piece of information in the passage which I am still working on but I don't want to discuss it at this time.
The above quotation is an extremely clever piece of text containing a wealth of information and I believe there are other pieces which may also contain additional information if we only knew how to extract it.
Saturday, 10 September 2011
Recently, I intimated that I had a small revelation to make - and now I have written it up on one of my websites. I haven't published it yet, but now I'm wondering if I'm right, and if I am, should I be broadcasting it, and if I'm wrong do I want to stick my head up above the parapet to get shot at again?
Its not much of a revelation, I think that word was used by another blogger who used it when I mentioned that I had something else to discuss. I had what I think was a moment of clarity just before I went on holiday and nothing I have done since has dispelled the feeling I have that I'm right - but as I always say, I've been there before - and been wrong before! So I'm making a video to show the effect which I have described on my web site (not published yet) and I'll include it there. I mention this now because I've had a couple of emails asking me when I'm going to reveal it, but I'm not ready yet.
On another subject, writing blogs and responding to comments can be a tricky business, and I am as careful as I can be not to upset people and if I discovered that someone had taken offence at my words I would be extremely sorry. I have always requested that people moderate their language and try to do myself. Recently I discovered that someone had felt personally insulted at my words and I regret that, I therefore offer my sincerest apologies - they know who they are. May I say that having read and reread my words I can find nothing to take offence at, in fact they appear to me to be supportive of that person's view so I am at a loss to understand where I have overstepped the mark. Perhaps a private communication to explain would assist my understanding?
I'm putting the brief account of Johann Bessler's Wheel back up for a short time because I am concentrating on writing (rewriting!)...
It has always seemed obvious to me, that if Johann Bessler was genuine he would have wanted to leave precise information in a publicly acce...
Given that the search for the solution to Bessler's wheel has gone on for what seems like for ever with no real sign of any progress, a...
I have again replaced my usual blog with a brief account of the legend of Bessler's wheel. I'm currently unable to maintain the ...