Wednesday, 23 November 2011

Bessler's Gravitywheel, the Bessler-Collins Project, an Italian Documentary and the five mechanisms discovery.

Now that I've got the alternative theories about Bessler's wheel out of the way, we can return to my own theory that it was driven solely by gravity and that this does not violate any laws of physics. I know that not all of my readers agree totally with me but I'm certain that I will prove to be correct.

I'm writing a lengthy document, called the 'Bessler-Collins Project' which sets out my case and I will publish it when I'm happy with it. It incorporates all the clues, both graphic and textual, as well as the work I've done so far. I'm doing this just in case I drop off my perch prematurely!

I'm pleased to say that the Italian documentary is still on, and I'm just waiting on a date to travel to Rome.

I am back in the workshop and in the process of building the mechanism again and still making further discoveries in Bessler's papers - I've found further verification that he used five mechanisms and I know in this instance it does not refer to codes.

This implies that there is a sound reason for needing five mechanisms and I think I know why. Many people have suggested that one mechanisms would suffice to prove the wheel and I agree that it should certainly be able to initiate some rotation, but in my opinion it will be shown that it can only rotate the wheel so far and regardless of being in balance elsewhere it will not rotate further. I know why - or at least I think I do, but I prefer to keep quiet about that for now.


Saturday, 19 November 2011

The Leiden Jar, static electricity, a solenoid and some springs!

This is in response to a long email I received about the Leyden (Leiden jar). It is not my opinion, in fact I don't think it has anything to do with Bessler, but in case I'm wrong I thought I'd air the views of another, no matter how wacky -  he's aware of my opinion of his ideas.

I mentioned in my biography on Bessler, the coincidence of Pieter van Musschenbroek, a professor of physics at Leiden University, inventing the Leiden jar, an early method of storing static electricity, in 1745 - the year Bessler died, (it was also discovered by Ewald Georg von Kleist in Germany the previous year). I had previously examined the remote possibility that Bessler used static electricity in some way to provide the additional force often suggested as necessary, to make a gravity-driven wheel complete a full rotation, and recently the idea has reappeared in a couple of emails.

The story of the first test of the Leiden jar and its effect on van Musschenbroek's student helper, Andreas Cunaeus, is well reported in wikipedia. He was virtually knocked out by the strength of the electric shock he received and was unwell for two days following. Van Musschenbroek went on to arrange some spectacular demonstrations of the power of the device, and after having experienced the shock himself he wrote, in a letter to his French colleague RĂ©aumur, that the whole kingdom of France could not compel him to repeat the experience. The French priest Jean Antoine Nollet, a great popularizer of electrical phenomena, learned of the Leiden experiments via this letter and lost no time in contriving even more spectacular demonstrations. They culminated in one involving 700 monks joined in a circle to a Leiden jar!

It was suggested that if 's Gravesande, being a close friend and colleague of Musschenbroek, was so intently examining Bessler's wheel perhaps it was because he suspected some electric component at work within the wheel.

The static electricity stored in the Leiden jar was generated in the first place by transforming mechanical work into electric energy, usually by means of friction against a glass. Jan Ingenhousz invented an electrostatic machine made of plate glass - in 1746.

It will be recalled that Pieter van Musschenbroek, was the guy who was contacted by Daniel Schumacher, Peter the Great's librarian, charged with buying experimental equipment for his universities and of course it was Schumacher who negotiated with Bessler to buy his wheel for Peter.

My correspondent wondered if, perhaps Bessler had already discovered how to generate and store static electricity in a capacitor, or something akin to the Leiden jar. This he might achieve by including glass plates within his wheel, as per Jan Ingenhousz's method. The capacitor would have to be fully charged before he began. However I have questioned whether it is possible to temporarily power a magnet by discharging a capacitor suddenly. I suspect that the resistance in the magnet's coils might be too high for the sudden discharge of static electricity to overcome, but I'm not knowledgeable about this.

He went on to suggest that if it were possible then it might lead one to suspect that Bessler had designed an electromagnet or even a simple solenoid, powered by sudden discharges of static electricity which could be used to deflect weights on springs, thus overcoming the wheel's reluctance to continue to turn. Bessler, you will recall, said that he used springs but not in the way you think.

I know - it's crazy, but I like it!


Wednesday, 16 November 2011

Update - and the Conversion of Centrifugal Force Into Linear Force and Motion

Well it seems to me that the Italian interview has gone the way of previous offers from the media. I had an email a couple of weeks ago saying that they were unable to obtain permission to film within the Trivulziana library at Castello Sforzesco, which doesn't surprise me, so an alternative date has been promised for an interview in Rome. I won't be holding my breath in anticipation, but if something concrete does materialise I'll let you know.

My own efforts to reconstruct Bessler's wheel progress at a snail's pace because of frequent calls on my time from other commitments. I'm busy trying to make my garden (yard?) fox-proof at the present. We have a problem with urban foxes and they seem to be living next door - you should see the holes leading to their dens! Now back to matters Bessler.

Some years ago David E. Cowlishaw produced an invention he called a Gyroscopic Inertial Thruster, this was a way of the mechanically generating a unidirectional force, with which it was hoped one could direct a vehicle or a boat, in any direction, or indeed drive a space ship. It would replace gear trains, propellers and jets, as a device for generating thrust

It was said that this device was a consequence of the variable inertia property of matter. I would suggest that it was an example of parametric oscillation.

If Bessler's wheel is successfully built, it too will rely on parametric oscillation, (see my article on 'kiiking') and might show the way to a successful inertial propulsion engine - providing the correct configuration is used, to swing weights around, in such a way that the circular movement ends up producing a unidirectional thrust. In much the same way that an electric motor reversed becomes an electricity generator, so Bessler's wheel reversed, or driven, could be designed to produce a unidirectional force from weights rotating about the wheel axle.

There have been a number of claims to have successfully built an inertial thrust engine but I am not aware of any reliable examples - although someone may correct this impression. The point I am making here is that, just as in theory one could reverse the direction of energy in Bessler's wheel to produce linear force and motion and this would prove that inertial propulsion engines were a valid area of research, so on the other hand would the successful construction of an inertial propulsion engine also prove that Bessler's wheel was a valid area for research.


Thursday, 10 November 2011

There would be enough energy output from Bessler's wheel to power every home in the world.

Sorry to bang on about this but it is important in my opinin. There's been some discussions on the forum about how much power Bessler's wheel could generate and it has been argued that Bessler's wheel will never be of any practical use. I quoted some of Bessler's words and one particular sentence that struck me afresh was, "If I were to place, next to a 12-Ell wheel, one of 6-Ells, then, if I wanted to, I could cause the smaller one to revolve with more force and useful power than the large one. I can, in fact, make 2, or 3, or even more, wheels all revolving on the same axis."

I know there are many, both here and on the forum, who are sceptical about the amount of power which would be available from a modern gravity wheel. I have a sanguine disregard for this scepticism and ask you to consider this.

There are two conclusions to be drawn from the above quote; firstly that the inventor could make his wheels more or less powerful, regardless of the apparent external dimensions; and secondly by placing more wheels on the same axle he could increase the power output.

The Kassel wheel was able to lift a chest of stones weighting 70 pounds on the end of a rope, but I have argued that it was designed to turn more slowly to increase its chances of surviving the longevity test. Now picture two or more Kassel wheels, both mounted on the same axle. Together, they should be able to lift 140 pounds or more, depending how many are added. Applying the first conclusion from the above quote means that the 140 pounds lifted could be increased - elsewhere he claims a fourfold increase. So possibly, the 140 pounds lifted could be increased to 560 pounds, or a quarter of a ton. Given due consideration, I am sure that there is enough potential to run a home electricity generator, and overcome the maximum possible load, as long as there are enough wheels of the optimum configuration on each axle.

By 'optimum configuration', I mean a wheel which can only turn one way. Two-way wheels were balanced and needed a push to start them, therefore I do not subscribe to the idea that the mechanisms could turn the wheel in either direction. My idea of mirror image mechanisms is more logical to my mind, in which case removing the reverse-turning mechanisms would reduce an unnecessary additional load imposed on them, and remove their extra weight. This configuration would be less complicated, less likely to suffer problems and probably have more power available.

So I am confident that when it is finally built, Bessler's wheel will provide electrcity for every house - everywhere.


Friday, 4 November 2011

Why the Kassel wheel turned so slowly and what this could mean for us today.

I posted this thought on the Bessler forum but I think the message got lost in the argument I was trying to make, so I repeat the point here.

If Bessler was able to make his first three wheels turn at 50 RPM regardless of whether they were one or two-way wheels, why would he make his final and most robustly built one, only able to turn at about half the speed of the others?

My suggestion was that it was done in anticipation of the the long endurance test, so he could be sure that it would suffer less wear and tear because it would only have to to turn half the number of times, compared to the Merseberg wheel.

We know he claimed to be able to make wheels that could turn slowly or faster, so the slow rotation inherent in the Kassel wheel was deliberate. But there was a disadvantage to this decision, the slower RPM was less powerful, in my opinion, so he added extra weights on either side of the existing ones to give the wheel a little more power, and that is why the Kassel wheel was thicker than the Merseberg one, which was the same diameter, but only two-thirds the depth.  It seems to me that a slower turning wheel might produce less power than a faster turning one? If so that would explain the extra depth to his wheel when compared to the Merseberg one - he needed to add some extra weights.

On the above understanding I suggest that it would be possible to produce a much faster turning wheel complete with extra weights that could generate the kind of power we seek for our modern electrical requirements.


Tuesday, 1 November 2011

Could Bessler's wheel be the answer to the global recession?

I had a dream last night that inspired me greatly. I dreamed that I had finished the wheel and it worked! I posted a video on youtube showing the wheel with all the detail about how it worked clearly revealed, and when I awoke the next morning (still in my dream) and looked out the window, the road in which I live was filled with photographers, reporters and TV vans etc, all waiting for me to appear.

I was interviewed and said that this discovery would end the global recession and create growth and employment through out the globe, and would prove to be the greatest invention of the century.

Then I really woke up - what a disappointment to know it was only a dream! But I must have been thinking along those lines even if only subconsciously, and I think perhaps there is an element of truth in the dream - I think this machine could have a major impact on unemployment.

I looked up "global recession" on google and found this statement in the first link I looked at "The biggest threat to the global economy is the dearth of growth and jobs rather than the size of government budget deficits."

So I return to the hunt for a solution with new determination, and so should we all - and anyway, I don't want acres and acres of windmills and solar panels covering the English countryside and that could happen unless we can find the answer.


Johann Bessler's Graphic Clues

Despite including several drawings illustrating his wheel (althouigh external views only) in his publications, Grundlicher Berchicht, Apolo...