Why Bessler's wheel was able to accelerate to full speed in three turns.

Further to my last blog,I posted my thoughts on http://www.besslerwheel.com/ forum, about something that to me seemed to be illogical; the fact that the torque appeared to be greater for a one inch movement horizontally on a smaller wheel than on a larger one - and in the process found myself corrected. The torque itself remains the same but the acceleration of the overbalancing effect due to a one inch difference between the two positions horizontally, is greater on a smaller wheel than on a larger one - or when the action takes place closer to the axle. So although my means of getting there was wrong my conclusions were correct.

I had compared the speed of reaction on two rods balanced on a pivot at their mid-point. One rod was two foot long and the other was six foot long. In each case the same weights were attached, one at the end of the rod, the other, two inches inwards towards the centre of rotation, at the other end. The torque was the same in each case but the shorter rod accelerated into its unbalanced position much quicker. This suggested to me that, with the limited range of movement available from my mechanism, it would be react to imbalance more quickly if I placed the weight as close as possible to the axle.

This may explain why Bessler's wheel accelerated to full speed in just three turns - because although the weights moved a small amount, they did so close to the centre of the wheel rather than near the edge. I believe that this is a useful piece of information and one that is generally ignored or perhaps people are unaware of its significance. I certainly didn't consider it of any importance, but when I found I was limited by space for the mechanisms and sought a way around it, this fact supplied not only the solution to the problem but will, I believe, also deliver an improved reaction to the movement of the weight.

JC

Was Bessler's mechanism design counter-intuitive?

I got back to the workshop again yesterday, despite the snow, and made some adjustments to the mechanism. The reason being that while I was kept indoors by a chest infection I kept thinking about the reasons why, in my opinion, Bessler's wheel worked, and at the same time, wondering why none of us had ever thought of the solution. I realised that although the solution is simple enough and we see the principle in operation every day, how you can make use of it is not so easy to work out. As if this did not make the solution harder to find, it was extremely difficult to get the mechanism right because, I discovered during my days off, that the way I had designed it to work was incorrect in one very important detail - a design feature which requires some counter-intuitive thinking.

Even the simple arrangement of two weights diametrically opposite each other on a free-wheeling disc, can, under certain circumstances, give rise to incorrect weight placement when designed to overbalance the wheel. I called this counter-intuitive for good reason. I have only just worked out why Bessler showed some of the mechanisms the way he did, not because they were deliberately done that way to confuse but because that was the correct design for them. I'll explain what I mean in more detail at www.besslerwheel.com in a day or so. But for now I have to work to catch up on the time lost recently.

JC

A vertical or horizontal axis gravity-driven wheel

I was thinking about the fact that windmills can operate in the wind with either vertical of horizontal axes. The axle can either be in-line with the force of the wind or across its path. The same thing applies to water-driven wheels too. Over-shot and under-shot water wheels have an axle which lies across the path of the water. Water turbines have their axle in line with the flow of water. I have from time to time attempted to design a gravity wheel which would have a vertical axis, looking somewhat like the vertical axis windmill that Bessler was building when he died. I have never been able to find a theoretical solution to this problem and yet it seems to me that it ought to be possible.

I hadn't mused upon this question for some considerable time and inevitable my thoughts turned to my current understanding of the principle which works Bessler's wheel and I realised that for the first time I could visualise a workable system using the same principle for a horizontal gravity wheel. I will not be making one soon, as I have to finish my basic model which has had to await my recovery from a secondary infection I got after my cold the other week. But it seems to me that this might be a method of discovering if anyone else's design will work. If it can be converted to work with either a horizontal axis or a vertical one then it just might be the real thing.

JC

A film about Bessler and my life researching him

Since my lung operation in november 2008, I hadn't caught even a sniffle, and that's as well because they warned me never to catch anything ever again! Unfortunately, having managed to stay clear of infection for over a year, since I caught a bad cold on or about Boxing day just gone (2009), I have been having one cold after another and I can't seem to shift it. My wife thinks it's because I spend too much time in my cold old workshop, but actually I wish I could be there for longer, so I can finish the wheel. Now we are back to the arctic conditions and there is no way I can spend any time there even with my faithfull old patio heater. And that's another story. The problem with the heater is that it roasts the top of my head and allows my nether regions to develop icicles - nasty!

Anyway I received an email from a couple of guys who are into film production and they have decided that they want to do a documentary on Bessler and my search for the truth about him. They came here about eighteen months ago and interviewed me on film for about half a day, but since I hadn't heard much from them I thought the project had died. Now however they have time and the project has been revived and they have asked me to write a film script for the documentary.

I've never done one before but I am using the texts of such programs as 'Horizon' and 'Cutting Edge'and similar documentaries as a guide so that I have some idea of how to proceed. I guess that there will be considerable editing to do before it gets the go-ahead. We want to include animations and also visit some of the places where certain events in Bessler's life occurred. Because it is also about my search it will have to be slanted to my perspective which I like - and I may get to do the voice over. Of course it might never get off the ground - unless I produce a working version! Lets hope this cold weather warms up real quick.

JC

I'm 65 today!

I'm 65 today! I can now officially retire...except that I already did so a few years ago. On such a day I am allowing myself a little frivolity and I tried to write a limerick about me for my birthday, but I haven't managed it yet so here's one I wrote about Johann Bessler.

There once was a guy called Orffyreus,

Whose claims were regarded as spurious

He said with some levity

plus a morsel of gravity

The spins of his wheel were continuous!

And if that isn't enough here's one I did earlier:

There once was a guy called Orffyreus

Whose invention, they said, was ingenious.

He created a wheel

but would not reveal

What made it spin so continuous.

I shall of course return to my wheel work and sobriety tomorrow.

JC

The current build and why five?

Here is an update on the current build.

This model has presented some problems which I'm trying to sort out. It is a constant learning process and my latest revelation has explained another aspect of Bessler's clues which I had thought I'd already understood, more or less to my own satisfaction, previously. However I found that I could not make the mechanisms operate exactly as I needed to do, according to the principle I believe lies behind Bessler's wheel and I was tinkering with the various parts of the mechanisms and suddenly grasped why Bessler had done a certain thing and it was a real eureka moment!

I have had a number of these revelations over a period of time and some have turned into cul-de-sacs but others have proved invaluable. I know that I should not parade my hopes so publicly because if I'm wrong its a long way to fall and even further to climb back up - but (and as I heard it said on TV the other day - its a 'J.Lo but') I am so excited at the prospect of finally getting to the end of this life-long search that I cannot contain my exuberance!

I think that people will be surprised at how simple this machine really is. Even though I'm having problems building it, the basic idea is so simple that, as Karl commented, I cannot understand why it hasn't been discovered before. Bessler gives an amazing assortment of clues which all make sense once you have the whole picture but individually they seem to counter each other.

I still maintain my belief that five mechansisms are required and I'll try and explain why without giving too much away. If you assume that a piece of the mechanism has to fall at some point, then it is logical to think that the maximum benefit from that fall will be obtained from a right angled fall, i.e. 90 degrees. You could increase this up to 180 degrees, but half of that fall would be counter productive because .... think, which might be more effective? To start from twelve o'clock and fall to three, or start at three and fall to six o'clock. Any angle outside those two and you stray into the other angle's area of effectiveness.

So a 90 degree fall would fit with a four mechanism wheel. But a fall takes time to start and accomplish what ever it is designed to accomplish, so part of the fall will be ineffective because it is falling and not landing. If you also throw into the mix the fact that the fall cannot start early nor over-run, you can see that although it is designed to fall 90 degrees, in fact it is only going to be effective for slightly less than a full 90 degrees.

What is the next whole number after four that would fulfill the need to have a continuous input from falling weights? Five.

If that is a confusing explanation, I apologise. I thought I'd have a go at explaining my conviction that Bessler used five mechanisms without giving away the solution. Maybe I have?

JC

Gravitywheels for Reactionless Drives?

I'm probably going to be accused of jumping the gun because no such device currently exists, however I, a least, am confident that a reconstruction of a working Bessler wheel is almost upon us, in which case the following speculation might be of interest.

If I am right in my thinking, I believe that the simple fact that Bessler's wheel, or gravitywheel, is a real device then it should be possible to employ, say, an electric motor which can be used to drive it, taking over the role from gravity. What possible reason might one have for doing such a thing? A gravity wheel depends for its power on the force of gravity and what it does is convert the linear force of gravity into a rotational force. If we then apply power to the same device, forcing it to rotate, we should be able to obtain linear thrust, creating a linear propulsion engine or reactionless drive.

This is a well-known characteristic of many mechanical devices. An electric motor is also an electric generator. In its simplest terms you can turn the coil to produce an electric current or you can apply an electric current and turn the coil. So how could we use this potential inertial thruster?

Such a mechanical arrangement has been sought for years for space ship drives. Currently the options are limited to rocket power, although antimatter drives are being researched because it is reckoned to be the most potent fuel known. While 15 tons of chemical fuel were burnt per second to propel a rocket-powered human mission to the moon, just a few tens of milligrams of antimatter will send a ship to Mars, but imagine how much simpler the research would be, and cheaper, if a technique based on a gravity wheel configuration was available.

There are many other potential uses for such a machine and I'm sure that once a working gravitywheel is verified, the floodgates will open and a torrent of new ideas will come pouring out all based on the simple principle of a gravitywheel.

The employment prospects allied to this invention are probably higher than anything else ever invented.

JC

Back to wheel work imminently.

My flu-like symptoms are fading at last (I don't know if it was flu or just a bad cold, but the effect was the same). The weather here in England has been cold, at or below freezing since before Christmas, and well-below at night and we have had several inches of snow and the wind is blowing straight from the Russian steppes - it's cold bbbrrrrrrrr! Last night's temperature fell to 9 degrees below, here and 28 below in Scotland. More snow forecast for this afternoon.

I have cleared a footpath through the snow to my workshop and have dragged an old garden patio heater into it. Unforunately the gas bottle is empty so I am going to get a replacement one today, if I can drive the car to the store without wrecking it - the icy roads round here are lethal! Once the heater's working I shall be able to get back to work and finish this darned wheel!

LATER - got the gas and the heater works!

JC

Happy New Year - and my new year resolution.

Happy New Year to all.

I predict that this year, 2010, will be the year that Bessler's wheel finally returns to its former glory, to spin continuously, powered by gravity.

I have made my New Year's resolution to finish this last prototype of Bessler's wheel as quickly as my health and the weather, allows. If for some reason it doesn't work, I shall publish details of the principle behind it because I know that this at least is correct and it explains why no-one, apart from Bessler, has succeeded in building a gravity wheel, or gravity converter, call it what you want, in recent history. Failure of my wheel to run will be down to my own lack of skill in building it.

My previous predictions have fallen woefully short and my efforts to complete this task sucessfully must be be taxing most people's faith to the limit, but for the first time in my life, I have found the true reason why everyone has failed to date, and it is this knowledge that drives me on.

It was during the first half of 2009 that the truth dawned on me how we might achieve a gravitywheel but it wasn't until the latter half that I actually worked out the real meaning of Bessler's clues and subsequently the actual principle that would drive the wheel.

In the (hopefully) unlikely event that my prototype fails and my published work is also rubbished, I am sure that much progress will have been made leading to a greater understanding of the way the wheel worked. If this leads to someone else succeeding, good luck to them. This task is worth more than a single person's dream.

I added that last paragraph to cover all eventualities but in fact I don't anticipate complete failure as described, but if it happens it happens and I shall admit my fault with as much grace as I can (probably grudgingly) muster!

JC

More cold, and a cold.

Well I shouldn't be criticised for having good intentions but even the safest-seeming plans can suddenly become too hard to accomplish - they can go astray at nature's whim. Only days ago I believed the cold snap was over. Soon I would be back in my workshop to finish my final prototype (as I like to think of it); Christmas day followed with all the glad familial diversions it brings; more of the same on Boxing Day, to recover and then the freezing temperatures returned and I awoke with a throat that felt as if broken fingernails were wripping it apart! A fresh fall of snow of some 8 inches is forecast and it looks though my plans have been scuppered again!

It is only just over a year (November 5th) since I had a large portion of my right lung removed to rid me of a small benign tumour. I asked if I needed to take any precautions after my surgery and was told "no, just steer clear of infections"; I saide "OK - for how long?" "For ever" was the response.

So = now I have an infection and I have to keep warm - what a "*^$-8:/><*!"

I have finished my 'paper' on the workings of the gravitywheel and I'm ready to go public but just let me try to complete this final fiasco first ! (I love alliterations - in fact I find 'front'-rhymes fascinatingly fortuitous. The repetitive rearrangement of rhyming rear-end rhymes rate rather less rewardingly for reasons I realize are probably personal.)

I'll be back as soon as possible, confidence is sky high!

JC

Too cold! Time is short! More Bessler stuff decoded.

Since the weather has been consistently on or below freezing since my last blog entry, it has proved extremely uninviting and inhospitable in my workshop; so I have not been in there, other than for about twenty minutes a couple of days ago, when my finger actually stuck to a piece of metal I was trying to attach. I am desperate to finish construction but I'm thwarted at the moment, but there is still time before the year's end!

I've used the time to write up another description which I intend to publish on my web site and it should satisfy those who are convinced I've lost the plot or think I'm some poor deluded soul who builds gravitywheels in the air.

Even at this late stage I have made further progress in deciphering Bessler's work and I doubt that anyone else knows why Bessler included the 'Die Andere Figur' and the adjacent one in 'Das Tri...'. On the face of it there is nothing useful in the drawings so why bother to include it? Yes it has a simple bit of number code but there is more, as there always is with Bessler. Happily for me, it only serves to confirm what I already know.

JC

Yin yang, Tesla and Bessler.

In 1997, I wrote about the principle of yin and yang in my biography of Johann Bessler. I argued that it had very little provenance and yet it was widely revered as a philosophy. I know this word, provenance, is usually attributed to paintings and describes records or documents authenticating them or the history of their ownership, but I was trying to describe the odd lack of explanation of its origin and development. I am fully aware of the philosophy behind this important symbol and have read a number of theses on the subject but there is absolutely nothing which explains its derivation or origins and I suggested that perhaps it derived from a design for an actual machine - many eons ago, as the SciFi books say. This is not the place to enlarge on my theory but suffice to say that all references to yin and yang include descriptions of various kinds of energy and that and the lack of provenance was the basis for my idea.

I went on to compare the yin yang design with the design of the Savonius Rotor, but subsequently I felt that there was too little substance to add to my suppositions on this matter to pursue it and I had more or less dismissed any thought of further research from my mind - other than using the device as my avatar on www.besslerwheel.com - until today. Imagine my surprise to discover a link between yin and yang, something I call Bessler's principal and a diagram by Tesla. I don't wish to reveal anything more at this stage but I cannot help but marvel at the strange circuity of events that we encounter in a more or less haphazard manner throughout our lives, which seem to have a connection, however nebulous. I don't use the word circuity in its implied sense of a roundabout way of doing something, but more in the sense of a circuitous connection between two or three apparently disparate events which seem to add up in the same way that two plus two equals four.

I don't think I'm a gullible fan of mysteries and the so-called suppressed inventions, so I try to treat gossip and rumour ,with a generous helping of salt, as unsubstantiated and prefer to work out the truth myself where possible, but I once saw a sketch which was reputed to have been drawn by Tesla which, he apparently said, showed the shape that all energy derived from. There were some similarities to the yin-yang symbol. I have been unable to locate any copies of this sketch although I have looked from time to time and its possible that I have a copy in my Bessler archives somewhere. I shall endeavour to find it and will post it here if I'm successful - or someone else locates it and sends me a copy. How reliable the information is that Tesla did really draw this sketch, I don't know, but at least it makes an interesting coincidence if nothing else - and I can confirm there does seem to be a link between the yin yang symbol and Bessler's wheel.

JC

Hostage to fortune.

My seeming confidence in my ability to successfully reconstruct Bessler's wheel may seem like I have given a hostage to fortune - and yet, despite the limited time left to achieve my goal, as far as my wager goes, I remain buoyantly unconcerned at the possibility of failure. The reason for my apparently disproportionate feeling of optimism lies, not in my current construction, but rather in the sure and certain knowledge that I know what principle lies behind Bessler's wheel and which powers it. I can say without any fear of correction that there has not been a single suggestion by any person, past or present, which explains this principle, although there have been a number allusions to it in a general way but which have missed the truth by a whisker or two. Because of this knowledge, I'm confident that I shall succeed, if not this month then next month or the one after.

Now before certain people jump on this carefully considered comment as a sign that I am getting ready to admit failure, I would like to assure them that I have not failed as I have not finished the construction. However, I have heard it said that when man hatches plan, God dispatches man, so I have taken time to record my thoughts on this matter and have taken steps to ensure that, should my end arrive prematurely, my efforts will not have been in vain and hopefully we shall see this miracle of simplicity, operating around the world . Antoine de Saint-Exupery once wrote, "A designer knows he has achieved perfection not when there is nothing left to add, but when there is nothing left to take away". I cannot say that this design is perfect but it is extremely simple to understand - if only it were as easy to construct!

My insurance in case of a sudden exit from this world has taken considerable time to complete and that task has looked more attractive to me than contemplating the prospect of standing in my workshop during the weather we have been subjected to during the last two weeks. But that task is done; the sun is out; it's very cold but dry, so back to work!

JC

My new frictionless and wobble-free wheel

Recently I have managed to refrain from giving updates on my attempts to reconstruct Bessler's wheel because time keeps slipping by and my frequent estimates for completion slip away too. I was receiving a certain amount of flak, good-humoured I hope, but it made me think twice about making promises I might not be able to keep. However I have had a few emails requesting an occasional update so this is the situation at present.

The current prototype is still under construction and looks like it will be finished before the end of the year - in order to win my wager with Bill! I have built a new wheel stand for this model because the previous one looked so bad when compared with those I see posted from time to time and I anticipate posting pictures of this one, working or not. The bearing supporting the wheel has been improved with the addition of a bicycle front wheel bearing and there is very little friction to interfere with any spontaneous rotation that might occur - I wish!

I have argued repeatedly that friction should be the least of our worries because we wish to build a wheel which will do work, and therefore overcoming friction would be a breeze. But I have to admit that seeing the new backplate spinning easily and without the lateral wobble which seemed to be an intrinsic component of all my previous models, I'm now converted to relatively friction-free assemblies. The wobble I referred to had a tendency to throw my previous mechanisms into disarray, so it is all to the good that it has been eliminated. I remain confident that this design will work.

JC

Gravitywheels and bogywheels

The email address for this site uses the word bogywheel and it has been pointed out to me for the umpteenth time that this spelling is incorrect and it should be spelled bogey or bogie. Bogie wheels are used, typically under railway carriages and I think they are called wheel trucks in the USA. I was well aware of this fact and deliberately mispelled it because I intended it as an acronym for Bessler/Orffyreus GravitY Wheel, BOGY wheel for short.

This brings me to something that has bothered me for some time. I used the word 'gravitywheel' because the wheel is driven by gravity - alone. Everyone knows that I am firmly of the opinion that Bessler's wheel only required gravity to work - no other forces were necessary for its continuous rotation. This viewpoint is certainly not universally agreed with, even among those who support my contention that Bessler was genuine. To try to answer such criticism I have attemped to argue the point from time to time, for instance, via my web site at http://www.gravitywheel.com/ under the heading 'The Collins Conjecture'. My words have bounced off the skins of the vast majority with little effect and I have to admit that the arguments were probably too speculative, confusing and poorly worded and what we need is something that is simpler to understand.

I have argued that because gravity is a conservative force does not mean that it cannot be used as we desire and that wind and water flow are also conservative which we already use for energy. There is one major problem with likening gravity to the wind and flowing water; despite the fact that it can be argued that each force is conservative and therefore capable of being tapped directly for such purposes as generating electricity, both wind and water act directly on windmills and water wheels, respectively, while gravity wheels require the addition of weights. It seems to me that there must be a better way of comparing the three forces to obtain a deeper
understanding.

To compare the three forces under the same circumstances the following would have to apply. To drive a gravitywheel requires that moveable weights should act on the wheel to cause it to overbalance and turn, or alternatively, a succession of falling weights from some external source; for a windmill to be tested under the same strictures we should have to picture a test in which we released into the wind-flow a succession of objects, helium-filled balloons for example, each carrying a small weight, which were designed to hit the blades of the windmill causing it to turn. But we would need endless numbers of balloons striking the windmill on one side to keep it turning. The same test could be applied to water flow; there would have to be a succession of floating objects striking a submerged wheel in such a way that it too turned.

Under these circumstances, the wind would be driving the weights, not gravity. No one would seriously suggest that that was the way to turn a windmill and it is obvious that if you tied the balloons to the blades of the windmill that it would not turn in the wind just because of the pressure of the wind on the balloons. But that is what we are suggesting with a gravity wheel. To solve this problem We have to design a weight-driven wheel that reflects the interaction between the wind and the windmill blades.

JC

Two principles and Orffyreus or Bessler?

This has been an interesting week for me. I am still finding difficulty in allocating enough time to building Bessler's wheel according to my design. But during one of the brief moments when I managed to get to work on it I discovered that there are at least two completely different ways to achieve the same result i.e. a gravity driven wheel. My original design and the second method each use the same kind of mechanisms, but obviously configured slightly differently. The second method looks easier to build and once I've finished the first design I shall build another wheel according to the second method. This seems to back up Bessler's claim to have built wheels which worked on different principles. They are different but one leads to the other.

I have also had subjective confirmation that my design is right because of questions raised in http://www.besslerwheel.com/. In some of Bessler's more literary descriptions of his wheel the inventor makes use of metaphors to aid understanding and at the same time confuse. Two metaphorical descriptions had left me clueless as to the reason for their inclusion, but recent references to them brought them back to my mind and at last I understood them - and as I've said before, the understanding of these descriptive clues seems to come after the solution arrives which is a pain but also useful in confirming that you are going the right way. As I said this is a purely subjective experience and open to the accusation of self-delusionment!

Someone wrote to me expressing doubt that I should refer to the inventor as Bessler because he chose the pseudonym, Orffyreus. I have wavered from one view point to the other ever since I first began to write his biography , "Perpetual Motion; An Ancient Mystery Solved?" I decided on using the name Bessler rather than Orffyreus almost as casually as flicking a coin to make the decision, simply because I could not make my mind up which was better. I think he would approve of my use of his real name because I have written so extensively about the reasons for the name change that no-one could be in any doubt as to whom I am referring to, which ever name I use.

He adopted the name Orffyreus for a very good reason; he wished to make people question the name and seek the reason. This, in my opinion, he did to provide a pointer to the use of alphabetic substitution and alphanumeric codes - and we all now know the reason for that. It was his intention to provide encoded information about the design of his machine for posterity.

JC

Put the horse before the cart!

Bessler the crafty old fox, almost outwitted me again and then I remembered his advice in Maschinen Tractate - don't forget to put the horse before the cart! All the indications were there that I had it right, but I couldn't for the life of me understand why the weight wanted to move in the direction it seemed to be determined to move in! Then I noticed one of Bessler's little pet mistakes - not really mistakes at all but rather clues as to how the thing should be put together. Not that I hadn't seen the error previously - I once made a long list for my own amusement of all his apparent mistakes and came to the conclusion that every single one was deliberate - but I just couldn't come up with a convincing explanation for this one before today. As is always the case with Bessler's clues, when you see it you realise how simple they are, and wonder why you didn't see it before.

So. I wasn't going to give any more commentary on how things are going with the build, but I was so pleased with this discovery, I just had to share my glee with you. Well it's back to the work shop again.

There are a set of clues that I haven't published yet but which are, in many ways, more informative than the ones I have discussed on http://www.theorffyreuscode.com/. As I suggested above, look for errors by the inventor. They turn out not to be errors at all but clues as to how the machine was constructed. The trouble is, it isn't clear what they mean until you happen on the right design and then afterwards when its too late, the meanings become clearer.

Then there is the 'Toys' page, a collection of drawings which show you various details about the mechanism. 'A' for example shows the mechanism before it has moved, notice the horizontal lever mounted in a slightly off set way.

'B' shows the same mechanism but a different part of it - after it has moved.

'C' and 'D' show two clues each, not difficult to grasp. Each mechanism has one weight up and one down, and each also has two sets of levers somewhat in the form that you see them on the page.

'E' connects those two parts of the mechanism, which is why it falls roughly between the two.

Too much already!

JC

Global Warming; both oil and time are running out.

In an address to members of the European parliament a while ago in Brussels, HRH Charles, Prince of Wales stated that "climate change presented such a threat that, uniquely in history, it will surely require the effort of every nation and every person to find and implement a solution before it is too late."

On an earlier occasion He said, "The evidence on climate change is both frightening and alarming. Doing nothing is simply not an option, it can't be any more, because of the urgency of the situation. This is not about saving the planet. Actually, it's about saving us. That is where each and every one of us has a responsibility to do what we can."

In July this year HRH said that if the world failed to heed His warnings then we all faced the "nightmare that for so many of us now looms on the horizon".

Others such as Al Gore and Gorden Brown have also commented similarly. Gordon Brown warned that there were only 50 days to save the planet from global warming - 50 days, that is, before more UN talks, Mr Brown said that countries were not making progress quickly enough to reach agreement and warned of the economic, human and ecological impact of a failure to cut the emissions.

Nearly four years ago former Vice President Al Gore said we only have 10 years left.

The consensus seems to be that not only is oil running out, but due to carbon emissions and global warming, also time.

HRH's reputation as a passionate environmentalist is unassailable, I must therefore ask why it is that a technology which has been known about for almost 300 years and through which many of his concerns can be assuaged is completely ignored, derided, and scorned. I know the answer of course and the fault lies not with HRH but with our scientists. The assumption that because gravity is a conservative force it cannot be used to drive machinery is inaccurate and can be proved wrong.

I refer to a machine once known as a perpetual motion machine, but latterly referred to as a gravity-converter. It was invented in 1712 by Johann Bessler, also known by the curious pseudonym, Orffyreus. The documentary evidence that it was genuine is compelling.

I also note with a certain amount of amusement that "in a bold move to lessen our dependence on traditional fuels and decrease carbon missions, Congress voted to repeal an old Republican ban on perpetual motion machines, clearing the way for the development of self-propelled water wheels, self-flowing flasks, float belts, zeromotors, and other environmentally-friendly industrial equipment." [courtesy of thepeoplescube.com]

How wonderful it would be if this single act were to open the flood gates of invention and lead to a kind of perpetual motion machine! But back to reality.

The implication of HRH's comments is that no stone should be left unturned in our search for a solution to global warming. If a potential source of free, clean energy can be identified then surely it behoves us to examine the claims put forth and develop such technology? To quote HRH's own words "That is where each and every one of us has a responsibility to do what we can." I have been doing "what I can" since I self-published a book about the machine in 1997. I have a number of web sites each offering additional information about the machine, but so far I have the attention of just one accredited scientist.

Surely the time is right for the resurrection of Bessler's wheel? He announced in 1712, yes that was almost 300 years ago, that he had invented a gravity-driven machine. It was examined by numerous people, amongst them, Gottfried Leibniz, and believed to be genuine. Unfortunately the inventor died without revealing the secret, and although the machine underwent twelve years of intense scrutiny it has been ignored, discarded and dismissed as a scam.

To me it seems quite extraordinary that, given the strong circumstantial evidence that the machine was genuine, no notice has been taken of it, other than by gifted amateur engineers and others around the world who also find the evidence absolutely convincing.

What use would such a device be? The obvious and most simple use would be to generate electricity for innumerable uses. How can such an invention be left unused and disregarded? Imagine how dramatically carbon emissions would be cut once the world was using it where ever possible to eliminate the need for fossil fuel and bio fuels.

It might be thought that such technology has been lost and that it is too late to start researching the possibilities in this area of what is generally referred to as pseudoscience, but actually there is reason for optimism. Bessler admitted that he would probably fail to get recognition for his achievenment during his lifetime and would in that case settle for post humous success and accordingly, left behind him a number of clues that were intended to guide a particularly perspicacious person to a successful conclusion and build a working model of the original machine. I am not suggesting that I am that perspicacious person, nevertheless even I have made some significant advances leading to a fuller understanding of the machine and why it does not conflict with the established laws of physics.

I just wish that there were more people who would study the evidence without prejudice, because I'm sure that anyone with an open mind and no preconceptions, would come to the conclusions that here was a machine that would solve many of the problems that we face in trying to reversae the effects of carbon emissions.

Are there others out there willing to take a step outside their comfort zone and examine the evidence? If so please pay a meaningful visit to my web site at http://www.free-energy.co.uk/ and the others listed on my LINKS page. Maybe you will be persuaded to seek an investigation of this machine and encourage proper funding of its development. You could contribute to the rescue of the whole planet and its inhabitant, slowing the advance of global warming more speedily than any other technology even under consideration.

JC

Back from Spain, refreshed and reinvigorated

Well I'm back! I was forced to take a week away in Spain with my children and grandchildren. Of course I was reluctant to go, imagining the warm blue seas and azure skies that were sure to greet me, not to mention beer, wine and food at roughly half the price, or less, that it is here in the UK, but I generously submitted to the entreaties of my family. There was thick fog and rain and it was cold when we took off, something I knew I was going to miss, desperately, but one has to consider the needs of others, so I bravely soldiered on. No internet where we went! How on earth was I going to manage without my daily dose of the besslerwheel forum? Well I managed!

Seriously, it was a wonderful break and strangely, not having the wheel project right under my nose, benefitted me because I was able to comtemplate everything mentally and I discovered some additional clues that had been staring me in the face but which I was too close to see. No changes are necessary but confirmation of the actual sizes of the various parts has been made possible.

I cannot believe how clever Bessler was, not just in building the wheel but in hiding all sorts of clues in full view of everyone for so long. Maybe he was too clever, otherwise the clues would have been found years ago and not almost 300 years later.

On a completely different subject, one of the odd things I have noticed is that there is much talk about the rate of exchange between the Euro and the Pound and how bad it is for British people holidaying abroad, because of the fall of the Pound against the Euro. We are encouraged, nay exhorted, to spend our holidays in here in England, because the countries of the Eurozone are now too expensive. Well that may be true of some countries, such as France or Germany, but Spain is nothing short of brilliant! Excellent food and wine at prices that make us green with envy; wonderful people; dramatic scenery; amazing historic buildings; beautiful beaches, heart-stirring music. What more could you wish for? Who cares if the Pound is almost at parity with the Euro? It's still the best place to go and still the best value.

OK travelogue over.

JC

The 20/20 vision of hindsight

It has been pointed out to me that my posts both here and on http://www.besslerwheel.com/, over the last few months, about my self-proclaimed progress in building a working Bessler-wheel, have been somewhat overly optimistic. Having read through a summary of them, kindly provided by a member of said website, I have to agree that it certainly looks that way. But I never fail to be amazed at the efforts some people will go to prove a point, in this instance, trawling through pages and pages of text to harvest choice comments made by me with little consideration at the time, to support their apparent belief that I am either a dreamer or a scam artist - or completely deluded.

In fact I'm none of these as will be shown in due course. But I am embarrassed at how almost effusively I have predicted success within a short time and how cruelly the truth emerges that I am not quite there yet. It is easy to point the finger of scorn at predictions, using the 20/20 vision of hindsight, but how many would put their reputations on the line by predicting success, no matter how convinced they might be, in an area so thoroughly derided, even within a community of like-minded individuals such as we perpetual motionists? Only someone having complete conviction as I do, that time will prove them right. Optimism reigns strongly here because, as has been the case for several years, I find that each failure teaches me something new and is a step forward towards success.

I have good reason to be optimistic about solving this puzzle but I cannot share it yet. All I can say is that I have solved a large number of clues both textual and graphic and when added to my knowledge of the principle behind the wheel, leads me to believe with absolute certainty that I will succeed in replicating Bessler's wheel. I have a detailed drawing which shows every part of the mechanism and even some areas which had, only weeks ago, remained slightly hazy have become clear. I am building it according to my drawing. As I have said before, if I cannot build it then I shall have to get someone else to do it for me. Either way publication of the details will follow.

This does not rule out the possibility of someone else succeeding before me and it might be that they get there by a different route, but I can say with sure and certain knowledge that mine is derived wholly from Bessler's wheel. Once it is built I shall be able to say that I could not have succeeded if I had not had his clues to help me. Even though I might have tried for a lifetime, without the clues I don't think I would ever have succeeded. But some other researcher might arrive at the same objective because they have better skills, both intellectual and dexterous, and in that case they would be far cleverer than I who simply followed a trail of clues to the treasure.

JC