Why Bessler's wheel was able to accelerate to full speed in three turns.

Further to my last blog,I posted my thoughts on http://www.besslerwheel.com/ forum, about something that to me seemed to be illogical; the fact that the torque appeared to be greater for a one inch movement horizontally on a smaller wheel than on a larger one - and in the process found myself corrected. The torque itself remains the same but the acceleration of the overbalancing effect due to a one inch difference between the two positions horizontally, is greater on a smaller wheel than on a larger one - or when the action takes place closer to the axle. So although my means of getting there was wrong my conclusions were correct.

I had compared the speed of reaction on two rods balanced on a pivot at their mid-point. One rod was two foot long and the other was six foot long. In each case the same weights were attached, one at the end of the rod, the other, two inches inwards towards the centre of rotation, at the other end. The torque was the same in each case but the shorter rod accelerated into its unbalanced position much quicker. This suggested to me that, with the limited range of movement available from my mechanism, it would be react to imbalance more quickly if I placed the weight as close as possible to the axle.

This may explain why Bessler's wheel accelerated to full speed in just three turns - because although the weights moved a small amount, they did so close to the centre of the wheel rather than near the edge. I believe that this is a useful piece of information and one that is generally ignored or perhaps people are unaware of its significance. I certainly didn't consider it of any importance, but when I found I was limited by space for the mechanisms and sought a way around it, this fact supplied not only the solution to the problem but will, I believe, also deliver an improved reaction to the movement of the weight.

JC

Was Bessler's mechanism design counter-intuitive?

I got back to the workshop again yesterday, despite the snow, and made some adjustments to the mechanism. The reason being that while I was kept indoors by a chest infection I kept thinking about the reasons why, in my opinion, Bessler's wheel worked, and at the same time, wondering why none of us had ever thought of the solution. I realised that although the solution is simple enough and we see the principle in operation every day, how you can make use of it is not so easy to work out. As if this did not make the solution harder to find, it was extremely difficult to get the mechanism right because, I discovered during my days off, that the way I had designed it to work was incorrect in one very important detail - a design feature which requires some counter-intuitive thinking.

Even the simple arrangement of two weights diametrically opposite each other on a free-wheeling disc, can, under certain circumstances, give rise to incorrect weight placement when designed to overbalance the wheel. I called this counter-intuitive for good reason. I have only just worked out why Bessler showed some of the mechanisms the way he did, not because they were deliberately done that way to confuse but because that was the correct design for them. I'll explain what I mean in more detail at www.besslerwheel.com in a day or so. But for now I have to work to catch up on the time lost recently.

JC

A vertical or horizontal axis gravity-driven wheel

I was thinking about the fact that windmills can operate in the wind with either vertical of horizontal axes. The axle can either be in-line with the force of the wind or across its path. The same thing applies to water-driven wheels too. Over-shot and under-shot water wheels have an axle which lies across the path of the water. Water turbines have their axle in line with the flow of water. I have from time to time attempted to design a gravity wheel which would have a vertical axis, looking somewhat like the vertical axis windmill that Bessler was building when he died. I have never been able to find a theoretical solution to this problem and yet it seems to me that it ought to be possible.

I hadn't mused upon this question for some considerable time and inevitable my thoughts turned to my current understanding of the principle which works Bessler's wheel and I realised that for the first time I could visualise a workable system using the same principle for a horizontal gravity wheel. I will not be making one soon, as I have to finish my basic model which has had to await my recovery from a secondary infection I got after my cold the other week. But it seems to me that this might be a method of discovering if anyone else's design will work. If it can be converted to work with either a horizontal axis or a vertical one then it just might be the real thing.

JC

A film about Bessler and my life researching him

Since my lung operation in november 2008, I hadn't caught even a sniffle, and that's as well because they warned me never to catch anything ever again! Unfortunately, having managed to stay clear of infection for over a year, since I caught a bad cold on or about Boxing day just gone (2009), I have been having one cold after another and I can't seem to shift it. My wife thinks it's because I spend too much time in my cold old workshop, but actually I wish I could be there for longer, so I can finish the wheel. Now we are back to the arctic conditions and there is no way I can spend any time there even with my faithfull old patio heater. And that's another story. The problem with the heater is that it roasts the top of my head and allows my nether regions to develop icicles - nasty!

Anyway I received an email from a couple of guys who are into film production and they have decided that they want to do a documentary on Bessler and my search for the truth about him. They came here about eighteen months ago and interviewed me on film for about half a day, but since I hadn't heard much from them I thought the project had died. Now however they have time and the project has been revived and they have asked me to write a film script for the documentary.

I've never done one before but I am using the texts of such programs as 'Horizon' and 'Cutting Edge'and similar documentaries as a guide so that I have some idea of how to proceed. I guess that there will be considerable editing to do before it gets the go-ahead. We want to include animations and also visit some of the places where certain events in Bessler's life occurred. Because it is also about my search it will have to be slanted to my perspective which I like - and I may get to do the voice over. Of course it might never get off the ground - unless I produce a working version! Lets hope this cold weather warms up real quick.

JC

I'm 65 today!

I'm 65 today! I can now officially retire...except that I already did so a few years ago. On such a day I am allowing myself a little frivolity and I tried to write a limerick about me for my birthday, but I haven't managed it yet so here's one I wrote about Johann Bessler.

There once was a guy called Orffyreus,

Whose claims were regarded as spurious

He said with some levity

plus a morsel of gravity

The spins of his wheel were continuous!

And if that isn't enough here's one I did earlier:

There once was a guy called Orffyreus

Whose invention, they said, was ingenious.

He created a wheel

but would not reveal

What made it spin so continuous.

I shall of course return to my wheel work and sobriety tomorrow.

JC

The current build and why five?

Here is an update on the current build.

This model has presented some problems which I'm trying to sort out. It is a constant learning process and my latest revelation has explained another aspect of Bessler's clues which I had thought I'd already understood, more or less to my own satisfaction, previously. However I found that I could not make the mechanisms operate exactly as I needed to do, according to the principle I believe lies behind Bessler's wheel and I was tinkering with the various parts of the mechanisms and suddenly grasped why Bessler had done a certain thing and it was a real eureka moment!

I have had a number of these revelations over a period of time and some have turned into cul-de-sacs but others have proved invaluable. I know that I should not parade my hopes so publicly because if I'm wrong its a long way to fall and even further to climb back up - but (and as I heard it said on TV the other day - its a 'J.Lo but') I am so excited at the prospect of finally getting to the end of this life-long search that I cannot contain my exuberance!

I think that people will be surprised at how simple this machine really is. Even though I'm having problems building it, the basic idea is so simple that, as Karl commented, I cannot understand why it hasn't been discovered before. Bessler gives an amazing assortment of clues which all make sense once you have the whole picture but individually they seem to counter each other.

I still maintain my belief that five mechansisms are required and I'll try and explain why without giving too much away. If you assume that a piece of the mechanism has to fall at some point, then it is logical to think that the maximum benefit from that fall will be obtained from a right angled fall, i.e. 90 degrees. You could increase this up to 180 degrees, but half of that fall would be counter productive because .... think, which might be more effective? To start from twelve o'clock and fall to three, or start at three and fall to six o'clock. Any angle outside those two and you stray into the other angle's area of effectiveness.

So a 90 degree fall would fit with a four mechanism wheel. But a fall takes time to start and accomplish what ever it is designed to accomplish, so part of the fall will be ineffective because it is falling and not landing. If you also throw into the mix the fact that the fall cannot start early nor over-run, you can see that although it is designed to fall 90 degrees, in fact it is only going to be effective for slightly less than a full 90 degrees.

What is the next whole number after four that would fulfill the need to have a continuous input from falling weights? Five.

If that is a confusing explanation, I apologise. I thought I'd have a go at explaining my conviction that Bessler used five mechanisms without giving away the solution. Maybe I have?

JC

Gravitywheels for Reactionless Drives?

I'm probably going to be accused of jumping the gun because no such device currently exists, however I, a least, am confident that a reconstruction of a working Bessler wheel is almost upon us, in which case the following speculation might be of interest.

If I am right in my thinking, I believe that the simple fact that Bessler's wheel, or gravitywheel, is a real device then it should be possible to employ, say, an electric motor which can be used to drive it, taking over the role from gravity. What possible reason might one have for doing such a thing? A gravity wheel depends for its power on the force of gravity and what it does is convert the linear force of gravity into a rotational force. If we then apply power to the same device, forcing it to rotate, we should be able to obtain linear thrust, creating a linear propulsion engine or reactionless drive.

This is a well-known characteristic of many mechanical devices. An electric motor is also an electric generator. In its simplest terms you can turn the coil to produce an electric current or you can apply an electric current and turn the coil. So how could we use this potential inertial thruster?

Such a mechanical arrangement has been sought for years for space ship drives. Currently the options are limited to rocket power, although antimatter drives are being researched because it is reckoned to be the most potent fuel known. While 15 tons of chemical fuel were burnt per second to propel a rocket-powered human mission to the moon, just a few tens of milligrams of antimatter will send a ship to Mars, but imagine how much simpler the research would be, and cheaper, if a technique based on a gravity wheel configuration was available.

There are many other potential uses for such a machine and I'm sure that once a working gravitywheel is verified, the floodgates will open and a torrent of new ideas will come pouring out all based on the simple principle of a gravitywheel.

The employment prospects allied to this invention are probably higher than anything else ever invented.

JC