Tuesday 15 February 2011

Flights of Fancy - Or the right interpretation?

Over the years I've had a number of thoughts about Bessler's words and what he might have meant. Some of those I have published on my web sites (listed on the lower right). Some of it is speculative but nevertheless I didn't include anything I didn't seriously consider a valid proposal.

But there are other ideas that are more subjective and I won't publish them on my websites in case someone takes them as factual, but here on my blog I see no reason not to engage in what some might call flights of fancy. Therefore I shall post some comments on Bessler's words over the next few weeks. They are still valid interpretations but not certain.

I've no idea if this will generate any comments but this blog format is not ideal for discussion so although I shall read all comments with interest, I think that it will not be possible to respond to each one,  here.  I have considered opening a forum but I do not really have the time to run  it properly so I'll leave it to those who may want more discussion to take it elsewhere.  So, for my first example consider the words by Bessler.

"A great craftsman would be that man who can 'lightly' cause a heavy weight to fly upwards! Who can make a pound-weight rise as 4 ounces fall, or 4 pounds rise as 16 ounces fall. If he can sort that out, the motion will perpetuate itself. But if he can't, then his hard work shall be all in vain." - page.295 of my book "Perpetual Motion; An Ancient Mystery Solved?"

Or as Rainer on the besslerwheel forum wrote, more succinctly, "When 1 pound drops 1/4 , it will (swing,throw?) 4 pounds upwards by 4/4"

or as Stewart, also on the forum, says more precisely,"He will be called a great craftsman, who can easily/lightly throw a heavy thing high, and if one pound falls a quarter, it shoots four pounds four quarters high".

The gist of the comment seems to be that a one pound weight can lift a second one pound weight four times higher than the distance the first weight falls and the lift or thrust upwards is accomplished easily - or even that one pound could lift four pounds four time higher! These suggestions are, on the face of it, ludicrous. Obviously, Bessler cloaked his meaning in apparently meaningless nonsense and yet there is a sense to be obtained from it if we can, so here is my view on the matter.

One pound falls and four pounds rise - four plus one makes five. As has proved the case often, Bessler has hidden more than one layer of meaning in his clue and I think one layer of the phrase was intended to point us to the five mechanisms again.

Secondly, included in the comment is the emphasis on the second weight being lifted or thrown upwards easily. To me this means that if the weight can be lifted easily, it must mean that it is not lifted very high, just a 'kick' upwards. One way to do this is with a long lever with a weight at its end, doing the lifting.. 

Implicit in the comment is a corroboration of another of his clues which suggests that his weights worked in pairs, so that when the first weight in a pair fell, it moved its paired weight into a position from which the wheel was made to rotate. The other four mechanisms then revolved with the wheel and each rose at some point, so one pound falling made each of four pounds rise four times each.

The use of the word 'quarter' confused my translater and he adapted the word to the English system of weight, when actually I think Bessler meant that each lever-and-weight unit rotated a quarter of a turn.  However there is another possibility, and that is that the 'quarter' referred to, simply meant that the falling weight fell the same distance as the rising weight.  The word 'quarter' was used to throw us off the scent.  He might have said that each pound rose half way when the other pound fell half way. - or they rose and fell 15 degrees each.  The important clue was that both weights moved through the same distance.

Well that's my take on this particular comment by Bessler.  More to follow.

JC
Copyright © 2011 John Collins

Wednesday 9 February 2011

A gravitywheel will still obey the laws of physics

I know that it is commonly believed by some people that when Bessler's wheel is finally successfully replicated, those who inhabit the higher echlons of science will have to eat humble pie and re-evaluate the laws of physics and a few believe that the laws will actually have to be rewritten.

I have long believed that a successful version of Bessler's wheel cannot require the overturning of well-established physical principles. No matter how it might appear to conflict with the laws of physics, a gravitywheel must adhere to them. In which case when a working model is produced it will not be the laws which are wrong, but our interpretation of them.

It will be more than enough just to produce a working model and there is no need, in my opinion, to invoke some new physical law which so far has been undetected by mankind. For such a law, if it could be established and verified, would surely have been observable in some other context long, long ago. So that simplifies things because we only need to look at the laws we already accept and see how our understanding of them can be modified - without changing the them - to acommodate Bessler's gravitywheel.

I have spent a lifetime looking at these laws and I think I know how Bessler's gravitywheel was able to operate within the confines of the law of conservation of energy. I have alluded to this before, briefly, but reactions have ranged from scorn to apathy. So, as I said recently, I am currently building a model with an accompanying video, with which I intend to demonstrate that, despite the fact that gravity is a conservative force, it does not preclude the possibility of a gravity-driven wheel.

JC

Saturday 5 February 2011

66 and still trying to invent the wheel!

I'm 66 today! They say time travels faster as you age, and my goodness, is it speeding past now! It's been fifty years since I first read about Johann Bessler and even longer since I began designing perpetual motion machines, and I thought I might have solved the problem long before now.

There is a nice succession of links in this story. I first read about Bessler in a book called "Oddities: A Book of Unexplained Facts", by Rupert T. Gould. He was a Lieutenant Commander in the British Royal Navy noted for his contributions to horology and a host of other things and was described as a polymath. He gained permission in 1920 to restore the marine chronometers of John Harrison, and this work was completed in 1933, aided no doubt by his photographic memory. Harrison was the guy who won (eventually) the British Board of Longitude's prize for establishing the longitude of a ship at sea. The prize was £20,000, a fortune in those days, and it was the publication of this prize in 1714, which it is believed was the inspiration for Johann Bessler's decision to ask the same sum for the secret of his own invention, the gravitywheel. (For more on Harrison and to see an animation of the grasshopper escapement see http://en.wikipedia.org/wiki/John_Harrison)

John Rowley, the finest instrument-maker in England at the time, was highly praised by Harrison in each of two volumes he published. The King of England, George l, who had already recognised Rowley's expertise in mechanics, and made him "Master of Mechanics to the King", requested a special sun dial from Rowley as a gift to Karl, the Landgrave of Hesse and Bessler's patron. Rowley took it to Kassel and installed at Karl's castle and during his visit was able to meet Bessler and see a demonstration of his wheel. He came away convinced of Bessler's claims and devoted the remaining years of his life to trying to replicate what Bessler had done.

Briefly, Rowley actually witnessed the wheel, he was a friend and colleague of John Harrison whose clocks were restored by Rupert Gould who also researched and published an account of Bessler, which I subsequently read. One cannot help but speculate that Gould must have had an interest in Bessler's machine and been aware of the connections between those involved.

As someone pointed out recently, mine and Bessler's obsession with the number 55 even includes my birthdate. 5th Feb 1945. There is a five and a two, so writing two fives makes 55 and then 1 and 9 is 10 plus 45 is 55 again! Amazing (not)!

Being the optimist that I am I am still convinced that Bessler's gravitywheel will be replicated and it can't happen a moment too soon. Time is, as I said, whizzing past at great speed and the need for this machine is growing at an alarming rate. Sticking to the 55 theme, I think I should have discovered the secret when I was fifty-five however I didn't and neither did anyone else. Maybe this year as I'm sixty-six and Bessler first exhibited his machine on the 6th June 1712, (six and six) someone will do it then, but of course next year, being the 300th anniversary since then, it would be even better.

No 'wheeling' for me today - just relaxing, being waited on - and the company of my very patient family. (patiently awaiting a working wheel!) But tomorrow I return to the task.

JC

Friday 28 January 2011

Don't tempt fate with a precipitate announcement ... John

This is merely an observation and not aimed at anyone in particular but I note a common theme in postings both here and in the besslerwheel forum and in other alternative energy forums. Before I go any further let me admit that I recognise exactly the same symptoms to a marked degree in my own actions and therefore I speak with some considerable experience.

Researching Bessler and seeking a solution to perfecting a working gravity wheel is what drives most of us and it is commonly observed that many who are involved in this persuit may on occasion have a sudden spontaneous flash of inspiration and illumination in which the solution to the problem is revealed. Further consideration over a period of time - it might be hours, days or months, it makes no difference - and the details acquired in this sudden attainment of intuitive knowledge are confirmed to the apparent satisfaction of the lucky recipient.

Following on from this exciting news and transported by thoughts of fame and fortune, the beneficiary of this amazing insight will be mentally preparing the details of how he will reveal his knowledge to the world with one or two caveats. He will want to ensure that he receives a just reward for his projected success but he will be concerned that the mysterious MIB do not take remedial action to stop any public announcment - and of course he will consider the advisability of patenting his new invention.

These thoughts are common to most of us and understandable, and I suspect that everyone of us has had a moment when the solution seemed clear but upon further consideration it was decided that the design did not answer the problem. There are times too, when even detailed analysis of the apparent solution seems to indicate that we are on the right path and it is only when we come to actually build a model that the truth becomes cruelly apparent.

This tendency to be utterly convinced that you have hit upon the right design does not always fade with experience - I know this better than most! If you wish to share the design and are not concerned about who gets recognition for it, then go ahead and tell the world, but if you wish to have some kind of recognition - and that is perfectly understandable and acceptable - be warned, "multa cadunt inter calicem supremaque labra", or there's many a slip twixt the cup and the lip. It's best, in my opinion, not to say that you have the solution and you have only to complete construction of the device before revealing it to the world, because experience shows that what was revealed intuitively to you in the wee small hours,sometimes has a habit of tripping you up, by not actually working.

Let me stress that this is not so much a message to others as to myself! To all who would seek the glory of success, contain your excitement; say nothing in public; make a working model first.

JC

Tuesday 18 January 2011

Aren't we ignoring what is under our nose - Bessler's words?

Discussing my ideas about gravity-driven wheels (gravitywheels) has sparked some interesting ideas and theories by email which might advance my own research - or perhaps someone else's, but I think I'm on my own as far as believing that Bessler's wheel was driven purely by gravity.

I understand the reasons for the complete and utter rejection of this idea, but I don't think anyone understands why I am so committed to this line of reasoning. If it was based entirely on faith, which has been suggested more than once, I could understand why my viewpoint is ignored, but it's not. In addition I find it quite puzzling that almost everyone interested in this extraordinary project is single-mindedly looking for the solution almost anywhere except one which uses gravity alone.

When you read Bessler's words it seems obvious, to me at least, that he means that his wheel was driven entirely and exlusively by gravity, but because this appears to be in breach of the law of conservation of energy, such an idea is rejected without further consideration. To discard this proposal is to reject Bessler's words as if they were either false or designed to mislead, and while I accept that he didn't want anyone to discover his secret, he took the greatest delight, in my opinion, in teasing his readers with small pieces of information designed to titllate and intrigue. I simply don't accept that he wrote all that he did with the intention of completely deceiving us, his readers. He knew or at least hoped that at some point in the not too distant future his secret would be sold and everyone would eventually know how it worked. At that point he would not be best pleased in having to defend himself against accusations of lying or misleading. He was looking forward to pointing to all the clues in triumphant glee.

However that leaves us with a problem; how do we resolve the issue that gravity is a conservative force? I've posted some of my thoughts about that but I haven't revealed the design nor the key factor which I believe I have. I'm working on that but in the mean time I plan to video some demonstrations  of how the conservative nature of gravity does not necessarily hamper us in our search for a solution.  I'll post them and put a link here in due course.  This may take some time to accomplish.

Watch this space.

 
JC

Saturday 8 January 2011

Response to my forum posting about conservative forces.

The publication of my ideas about conservative forces on the Besslerwheel forum was met with a mixture of benign criticism and some somwhat less than favourable comments, as expected. You can't expect to suggest that 300 years of scientific advances might have overlooked some small detail without incurring criticism and argument, and I am not dispappointed by the reaction - it has got people talking about Bessler's wheel again.

What has surprised me is that among a small number of emails I received which offered their support for my conjecture there was one which apologised for not saying so publicly. The reason apparently was that doing so might diminish their standing in some way. I find this remarkable and it seems to mimic the situation between the majority of members and the rest of the world and indeed the whole history of the search for perpetual motion.

Many people who study Bessler's writings look for subtle deceptions and double meanings in everything he wrote and while I am guilty of seeing encoded messages in various places that are not as clear to others as they are to me, I think that he wrote the truth without dissembling and only restricted the information enough not to give the secret away. So when he wrote such phrases as, 'the machine was set in motion by weights'; 'Weights gained force from their own swinging'; 'the weights applied force at right angles to the axis' and Karl's view that' he did not disguise the fact that the mechanism is moved by weights', I think he spoke the truth and I have no doubt whatsoever that the machine depended on the presence of gravity and indeed was run by gravity alone. I see no need to invoke hidden meanings in phrases which describe in normal everyday language, the way the machine worked.  There is a phrase, 'the law of parsimony, or succinctness', which describes the principle of choosing a theory that requires fewer new assumptions, and in this case the simplest interpretation is the most likely one to be right, I think. 

I understand why some highly intelligent and experienced members of the forum insist on sticking to the belief that gravity cannot run the wheel because it is a conservative force, but I regret that they dismiss my thoughts with friendly humour but no serious consideration. And yet I read Bessler's words and can only conclude that gravity was the mainstay of his machine and just because gravity is a conservative force may does not completely and utterly rule out a way around it.  If my suggestion does not meet satisfactorily the criteria sought by those who would deny it, then I can't help but compare them to the rest of the scientific community who also refuse to contemplate such a possibility.

So once again I point the reader to my web site at http://www.besslerswheel.com/html/conservative_force.html, where he will read about the 'mysterious other force' which helps the weight complete its rotation without using any additional energy which wasn't generated by its fall.

JC

Wednesday 5 January 2011

Circumstances in which a gravitywheel can be turned continuously by gravity alone.

I have felt for some time that maybe I should put something about my own thoughts about the fact that gravity is a conservative force and therefore apparently unable to drive a gravitywheel continuously.

So I posted a short piece on my web site at http://www.gravitywheel.com/ and perhaps more unwisely, a short copy on the Bessler forum.  I know in advance that some people will take their customary potshots at me for taking this viewpoint but I cannot help my opinion.  I remain uttlerly convinced that there is a way to drive a gravitywheel by means of weights reacting to gravity and no amount of  constant repetition or parroting of the disinformation stuffed down our throat  at school can shake my conviction.

I read and read and read what I had written over and over again and I cannot see how anyone can argue with it, but argie they will and in the end I shall go my own way and maybe I'll prove myself right.  I hope so.

PS

In the light of a new day my words seem a trifle strong.  I wasn't dismissing everything we have been taught, rather I wished to express my doubts about the fact as taught, that because gravity is a conservative force it cannot be used to drive a gravitywheel continuously.  My feeling is that such a statement will one day be shown to be too inclusive, and that a particular mechanical design will allow such a mchine to work.
JC

The True Story of Bessler’s Perpetual Motion Machine.

On  6th June, 1712, in Germany, Johann Bessler (also known by his pseudonym, Orffyreus) announced that after many years of failure, he had s...