Sunday 30 October 2011

6th June 1712 + 300 years = 6th June 2012

In my last post I tried to make the point that without a small additional force we cannot make the wheel turn a full circle, and since no other force has been found that accomplishes this simple fact, I maintain my belief that there was only gravity required to drive the wheel. To my mind, believing that there is this other mysterious force available is far less believeable than that two bites at gravity were taken by each mechanism. I respect other people's opinions but I can't help feeling that there are going to be some people with egg on their faces when the solution is found.

I have just read an excellent explanation as to why these other forces such as centrifugal and the other ones associated with a spinning wheel cannot ever be sufficient to supply that extra force. See the Besslerwheel forum response to my post entitled, "A theory about why the number five is so prominent in Johann Bessler's works." by nicbordeaux. The link is at http://www.besslerwheel.com/forum/viewtopic.php?p=93780&highlight=#93780

Thanks to technoguy for reminding me about next year's 300th anniversary of Bessler's first exhibition of his gravitywheel at Gera. I hadn't forgotten but these things have a habit of creeping up on you and all of a sudden it's here and nothing has been done in preparation. Somehow we must find a way to celebrate it, ideally with a working version of Bessler's wheel. While I am optimistic that this will be achieved by then, I have to be realistic and admit that after 300 years of failures, the odds are against us succeeding, so we might just miss that date!

Nevertheless, I'm confident that someone will succeed in the next couple of years and I intend to do something to draw people's attention to this significant date - why? Because if a working wheel has not been made by then I think we shall need more publicity to attract new minds to the problem. Maybe none of us 'oldies' familar with the story will succeed and it will take someone with a completely fresh outlook to finally win the prize. How can we grab some headlines? I don't know and I'm not really into making a public spectacle of myself,at least not deliberately - however....

From 27 July to 12 August 2012 the London Olympics will be taking place and the eyes of the world will turned this way, and maybe with all the journalists and other media present and probably looking for stories to send home, before the Olympics start, perhaps I can grab some media attention? I don't have any ideas yet but I'm working on it.

JC

Friday 28 October 2011

Gravity can be used to power gravitywheels continuously because it is a conservative force.

Many people believe that Johann Bessler's claims were genuine, in which case an acceptable theory which fits in with modern science, has to be found which will allow a gravity-driven (or gravity-powered) wheel to work. There is strong scepticism against such a device for good reason. It appears to go against everything we have been taught. Putting on one side, for a moment, the statement which says you can't do it because gravity is a conservative force, there is the seeming impossibility of raising a weight again once it has fallen, causing a wheel to overbalance. That energy appears to be lost and therefore an additional energy source is sought which will bridge the gap or close the circle.

Various methods have been suggested such as using ambient temperature changes or static electricity or even a solenoid valve on a spring. The truth is that no one has come up with a viable additional energy source - except for me! We know Bessler said his weights worked in pairs; I have suggested that the secondary, 'shifter', weight fell and in doing so moved the primary or 'shifted' weight into a position which unbalanced the wheel. The additional energy source is therefore also gravity. There are two weights, one falls and has no effect on overbalancing the wheel but the second weight is moved by the action of the first weight and it is that one's position which overbalances the wheel.  There are two pieces of gravity used separately,

I have, in the past compared the force of gravity to the wind in an attempt to show that it may be a conservative force but that does not mean it cannot be used to drive a weighted wheel continuously. The wind is used to drive windmills, waterwheels and boats, why not gravity?

Because my argument rested on the theory that wind was a conservative force I sought support for the idea from the internet. Surely I would find either a definitive statement that wind was conservative or nonconservative. Imagine my surprise therefore to discover the extraordinary fact that I am unable to find a single web site which definitively states that wind is either conservative or nonconservative! Nobody discusses it - or nobody is able to say one way or the other.

I did find one fleeting reference which stated that "wind drag is friction and therefore non-conservative". The example referred to a racing car and the effect of wind drag which was therefore friction and so a nonconservative force. I agree in that context, but let us consider some simple definitions secured from the internet.

"The work done by a conservative force in moving a particle between two points is independent of the path taken." This also applies to the wind, we only measure the strength of the wind by seeing how far it moves something from A to B, the path is irrelevant.

I can lift a fallen rock against gravity and allow it to fall again. I can also catch a balloon blowing in the wind towards me and carry it back upwind and allow it to blow downwind again. There is a clue in the words "UPwind" and "DOWNwind".

"A conservative force can be thought of as a force that conserves mechanical energy. Suppose a particle starts at point A, and there is a constant force F acting on it. Then the particle is moved around by other forces, and eventually ends up at A again. Though the particle may still be moving, at that instant when it passes point A again, it has traveled a closed path. If the net work done by F at this point is 0, then F passes the closed path test. Any force that passes the closed path test for all possible closed paths is classified as a conservative force". When the wind causes a windmill to rotate, the blades travel a closed path so the wind is a conservative force.

"For non-conservative forces, the mechanical energy that is lost (not conserved) has to go somewhere else, by conservation of energy. Usually the energy is turned into heat, for example the heat generated by friction. In addition to heat, friction also often produces some sound energy. The water drag on a moving boat converts the boat's mechanical energy into not only heat and sound energy, but also wave energy at the edges of its wake. These and other energy losses are irreversible because of the second law of thermodynamics."  The windmills provide useful and usable energy - it is not 'lost' - which can grind flour and pump water etc. So wind is not a nonconservative force.

"Conservative Forces are reversible forces, meaning that the work done by a conservative force is recoverable, i.e. you can get out any work you put in or vise versa." Wind is a reversible force. Not only does the wind drive windmills but, for instance, you can electrically drive a windmill and produce wind. The wind is a reversible conservative force. use an electric fan and place a small windmill in the path of the wind. The windmill will begin to turn.

Saying that gravity cannot power a gravitywheel because it is a conservative force is incorrect. However this does not solve the problem of how to make it work for us but it does show that it is not impossible just because it is a conservative force.

JC

Thursday 27 October 2011

Why is the number five so prominent in Johann Bessler's works?

I wasn't sure whether to place this on the Bessler forum or just put it here on my blog, and certainly previous experience has taught me that many people either deride the theories expressed or argue forcefully against them, but I hope to gather some more support to my own view. I know I tend to be in a minority when expressing my belief that Bessler's wheel was gravity-driven, even here, but perhaps it will help me if I give my thoughts an airing. Any way I'll probably post it on both because it seems to me to be too important to ignore.

Most people are aware of the ubiquity of the number 5 encoded in all of Bessler's publications and many don't see any significance other than perhaps a nod to some kind of mystery school teaching designed to hint at the inventor's knowledge of ancient wisdom. I don't believe that theory, I'm convinced that Bessler was passing on information.

I have always thought that there were two hard facts established about the internal workings of Bessler's wheel and one of them was that there were five mechanisms. The other was that the weights worked in pairs. All else is open to conjecture. But one certainty is that Bessler thought that this piece of information was extremely important and even encoded it in his name right from the moment he adopted the pseudonym, Orffyreus.

I believe that five mechanisms were required because for me there is no other sensible interpretation to be taken from the clues - the number five is indicated by both the numeral five in text and code and by the presence of the pentagram in the drawings. I cannot think of any other reason for its presence so here I try to understand why it's a necessity to a working wheel.

Five mechanisms would need the wheel to be divided into five equal parts of 72 degrees each. Although I understand the argument that even one or maybe two mechanisms should be enough to demonstrate the principle, I think more will be required to achieve a useful rate of rotation. Let's suppose that each mechanism only produces a mechanical advantage (or overbalance) once in each rotation; then each one must be able to produce it sufficiently to turn the wheel at least 72 degrees, but less than, say 90, otherwise four mechanisms might suffice. Maybe it can just about reach 90 degrees but perhaps that isn't enough to maintain rotation? There would have to be an overlap of mechanical advantage (or overbalance) for each mechanism in order to maintain rotation and the greater the overlap the faster the acceleration.

Bessler wrote that "one cross bar makes the machine revolve slowly, just as if it can hardly turn at all. But on the contrary when I arrange to have many crossbars, pulleys and weights, the machine revolves much faster". (from Apologia Poetica - published by John Collins). If the mechanical advantage (or overbalancing effect) only amounted to a little over 72 degrees, and this happened only once in a single rotation, and there was only one such mechanism on the wheel, then the rest of the turn would have to take place with the wheel in a condition of balance. One can see how such an arrangement would produce a wheel which could hardly turn. Two, three, or four mechanisms would have little different effect if the overbalance only amounted to just over 72 degrees as there would be no continuity between each mechanism's action. An overlap of overbalancing would be required and if the mechanisms can only achieve an overbalance for, say 80 degrees of any single rotation, then anything less than five mechanisms will result as Bessler has described.

But if five mechanisms were introduced, then with more than a 72 degree portion of the full rotation for each mechanism, you would get the required overlap and an accelerating and continuous rotation.

This argument presupposes that the reader accepts the possibility of a gravity driven wheel - as I do! ;-)
JC

Monday 24 October 2011

Bessler's defence statement

It has often been suggested that perhaps Bessler was not as innocent as he claimed, otherwise he would have done more to defend himself against the claims of the maid. Well he did, but the records of his defence are unpublished as yet.

On New Year's day in 1728, shortly after the maid's accusations were made, Bessler began writing a 60 page statement concerning the claims of his maid and others and answering all accusations with a strong and righteous defence. I have a copy which, unfortunately, is largely illegible (for me at least) as it is the version Bessler kept for his records. The clean copy is undergoing restoration currently and may not be available for some time to come.

The little I have been given reveals that he complains frequently about the 'evil maid' and also about a large group of conspirators who have acted against him. They include several of his first wife's in-laws, including his former mother-in-law, his sisters-in-law and their husbands and other hangers on. His father-in-law was dead and therefore his wife was left to her own devices and she had little or no money and so she headed for Kassel to ingratiate herself with her daughter, Barbara, who unfortunately died in May 1726. Apparently the mother-in-law, also called Barbara, tried to manipulate Bessler to her financial advantage. His official title of Commercial Councellor gave him access to a number of schemes, some of the funding of which, she tried to divert for her own purposes. It seems that the accusations of the maid may well have been instigated by Barbara senior in an effort to threaten/blackmail Bessler into giving in to her coercions.

If this seems unlikely, remember that the maid had already served two prison sentences - and Barbara senior was the subject of a thirteen year long investigation into an infanticide in which herself, her maid and two of her daughters was involved.  The legal investigators had been searching for the maid who was 'lost', and it is suggested that with Barabara senior's husband's death and therfore the withdrawal of his protection as Mayor of their towm she had to flee, and so she headed for the maid's home and her recently deceased daughter. The baby in question might have been Bessler's, conceived on an earlier visit, but there is no evidence yet to prove or disprove that possibility.

I look forward to the day when the cleaned document is available and we can at last get the other side of the story.

JC

Thursday 20 October 2011

Johann Bessler's Hydrostatic balance.

In 1720 Johann Bessler is recorded as having made a hydrostatic balance for Johann Adam Cass. I have included a picture of it, as it still exists in the Landesmuseum in Kassel. I don't know how much of the whole instrument was down to Bessler, but looks well made.


This picture is from a book written by Henri Michel, called "Scientific Instruments in Art and History" Viking 1967.  He writes:-
"The balance shown here was made in 1720, by Johann Ernst Elias Bessler (1680- 1745), (known as Orffyreus, and notorious for his "Wheel" or perpetual motion machine) for the military engineer Johann Adam Cass of Kassel".

There is also a picture of the same instrument in "Die Naturwissenschaftlich-Technischesammlung" by Ludolf Von Mackensen (Kassel: George Wenderloth Verlag, 1991).

It will be recalled that Johann Adam Cass was a witness and one of the signatories and chief examiner of the Gera wheel. It seems that he moved to Kassel shortly after Bessler, to be in charge of military engineering there there.

In 1720 Cass published a book called "Neu verbesserter Ingenieur" which means "New Advanced Engineering", In 1722 he published "Nouveau corrige ou par des demostrations guide de l'ingenieur à la veritable mathematique",meaning "New or corrected by demonstration, Engineering Guide to mathematical truth". These publications were sponsored by Karl, the Landgrave.

The hydrostatic balance was a frequent component of perpetual motion designs and is still sometimes introduced as part of the mechanism.  Bessler seems to have included them in some of his Maschinen Tractate designs

I have also included the concept in my own designs from time to time but in the end I prefer the simplicity of weights, but are we denying the potential benefits of a the hydrostatic balance?  I don't think so.

JC

Thursday 13 October 2011

A real Bessler documentary on the cards?

Wow! You guys have been busy, it's taken me an hour just to catch up on all your comments. I hate to interrupt the flow with a blog but perhaps you can continue here or on the previous blog?

I'm back after a delightful week in sunny Spain, and among the emails awaiting me, I received an interesting one from an Italian documentary maker, who wishes to produce a film about Johann Bessler.

They say that they would use me as the main narrator (God help them!) and intend to film in the Trivulziana Library of the Castello Sforzesco in Milan. Interestingly for me, somebody on the Bessler forum kindly brough to my attention the existence of another copy of Das Triumphirende which is held at that this particular library.  I was able  to obtain high definition copies of their portraits from the library. This is the only other example that I'm aware of which includes the double portraits with the hole in one as did my own copy, which I used to have but which I passed on to another, safer pair of hands.

I assume (at this early stage I have no details) that if we are to film in this famous library, that I shall be able to see and examine this copy and I am delighted at the prospect.

The company, FarmStudioFactory, are an Italian film and television production company, but appear to make films for other people so it will be interesting to try to get some background on this to see where the idea originated.  I scraped up a few details on the library as I was so interested in it and this is what I found:-
"Along with the Cathedral - Milan's most famous and much beloved monument - the big Castle is linked to the vicissitudes and dramatic events that the city has experienced over the past centuries. For many years, in fact, it has represented a symbol of the power in the hands of the Dukes, as well as of the foreign dominators. Only at the beginning of the 20th century the Castle assumed its distinctive role, becoming a place of culture, which hosted numerous Lombard art collections. The Castle was named after Francesco Sforza, who transformed it into a ducal residence in 1450. But its origins date back to the second half of the 14th century, at the time of Galeazzo II Visconti.
Hosted inside the Castello Sforzesco is the revered Trivulziana Library. The library can be accessed to examine parchments, documents, records and prints. The Historic Archive preserves all the acts of the Municipality of Milan and of the Duchy dating back as far as 1385."
I also would like to know the history, the provenance,  of this particular copy of the Das Tri and how it came to reside in Italy. I have always believed that the other countries of Europe might hold some further accounts of Johann Bessler and it seems to me that a documentary about him could engage the attention of the right people to bring such information to the surface.

I'll tell you more when I know more. I should not get too excited as this kind of thing has happened to me before, more than once, and the project has always gone out like a damp squib!

JC

Monday 3 October 2011

Pendulums again.

Still trying to find the time to make my latest mechanism, unfortunately another week in Spain looms close, so it looks as though I'll be delayed again! Who am I kidding, I love it there! This week has seen the hottest October since records began, with temperatures of 29 degrees Celsius( that's 84F deg in real money!) - I know that's not particularly hot but for October its just amazing. It's all going downhill again on Tuesday so it looks as though my trip is timed to perfection. I will be connected there so I can keep any eye on things and maybe even write a blog about the wine, beer and sangria!

I'm tangled up in thoughts about the second drawing in Das Tri at the moment, and trying to discern exactly what Bessler was trying to tell us with the double drawing. The large triangular pendulum is intriguing and the three different angles seem to point, in my opinion, to the thirty degrees at the bottom - maybe its critical? I have the thought that a weight about to fall through 90 degrees ( a quarter) would need to be leaning a little in order to begin its fall as soon as possible. Each number on the clock is seperated by thirty degrees, so one o'clock is thirty degrees from twelve o'clock. Should we start the fall at one o'clock to stop at three o'clock?

JC

Monday 26 September 2011

Do the pendulums regulate or obfuscate?

Many among we 'Bessler's wheel' researchers have our own pet theories about different aspects of our self-appointed task, and they can be as diverse as the numbers of people involved. So it comes as no surprise to find my own theories treated with as much indifference as I treat many other people's - no offence intended and none taken. But one theory I have subscribed to, among a couple of others, for most of my life is the one about the pendulums indicated in two of Bessler's drawings; I refer to the drawing in Grundlicher Bericht published December 1715 and the one in Das Triumphirende published in October 1719. Both depict Bessler's Merseberg wheel and include a complex pendulum and according to Bessler they could be used to regulate the speed but, if not required, could be dispensed with. However as at least two reports comment on the extreme eveness and regularity of rotation of the wheels, there seems little or no requirement for their use.

My very first thought was that they were included to add interest to what was after all, pictorially a pretty dull subject matter without them. This thought was supported by the later drawings in Das Triumphirende which show an archimedes screw being turned. However not content with that drawing, Bessler also added another one which shows a large triangular pendulum with three bobs. As we have already dismissed the need for pendulums to regulate the wheel's speed why would he include yet another one, four years after the first?

I therefore dismissed the idea that they were there as mere decoration. I took the view that they were intended to convey information about the inner structure of the wheel; the mechanism in fact. I have expressed this thought elsewhere but my opinion has been largely ignored and it seems that most people attempt to make the case for their use as governors, something I would argue against.

Following my belief in the true purpose of the pendulums, I have over the years, played with a number of mechanisms designs loosely based on the pendulms, several with interesting properties, but nothing that subscribed to the concept which I have favoured for some years now - the actual way that gravity alone was able to drive Bessler's wheel.

But, as I've been unable to get on with my Bessler wheel experiments for the last few weeks, due to other commitments, I have been restricted to just thinking about it and studying the drawings - and I think I have discovered something interesting in his main wheel drawing. It's extremely obscure and I'm fairly confident that you are unlikely to find it unless you've followed my own train of thought over the last three or four years. Having said that I wouldn't be surprised to learn that others have made the same connection, but I should think that if I am right then so should they be and therefore we would surely have heard about it by now - in which case either I'm wrong about this particular aspect of ther drawing - or no one else has made the connection.

I hope to make an experimental mechanism to test my thinking next week and if it works I'll follow it up with a full prototype - and that may test my basic hypothesis to destruction!
JC


Sunday 18 September 2011

Disenchanted with Bessler's wheel? Energize - Invigorate - Revitalize!

I'd be interested to know how people became aware of, and interested in, Johann Bessler.

I fear that the enthusiasm for Bessler's wheel is waining. I don't mean those who are already 'on board' so to speak but 'newbies' seem to be few and far between. I note that the majority of those who frequent the websites devoted to Bessler with an open mind are retired or approaching retirement, I apologise to those to whom retirement is still a long way off, but there does seem to be a lack of interest in this puzzle among younger people. I assume it has something to do with the public perception of 'perpetual motionists', as we are seen to be. The facts about Bessler are completely swamped by negative opinion and a humorous/scornful approach to descriptions of those who are dedicated to finding his solution.

When I began this journey in 1997, by publishing "Perpetual Motion; An Ancient Mystery Solved?", I was pleasantly surprised by the amount of interest worldwide, I don't mean that it became an instant best seller (I wish!!!) but there were emails from all around the world and lots of interest from academics as well as engineers and people from many varied professions and as well as educated amateurs. Now there is nothing. I see that posts on the forum have largely dropped to armchair discussions - few people have any input on possible solutions any more. Do we think we have we exhausted every possible concept or design? I know I haven't and in fact I'm working on something that I feel more confident about than I have for some time.

Of course I was helped in the early days by articles about my book, appearing in Nexus magazine, Infinite Energy magazine, the Journal of Free Enery and others. This may have triggered interest in my book - I don't know. But I do think that this subject does not appeal to younger people and I regret that. When you look back at the history of great scientific discoveries, many were made by people in their intellectual prime, usually their twenties and thirties, and the majority were not 'professional' scientists but educated amateurs. Some, such as Michael Faraday, had only the most basic education yet his achievements in the fields of chemistry, electricity and magnetism were huge. I feel that we need to find some way of attracting the interest of younger people to inject some new thinking into this ancient topic.

When I finally get around to finishing my book on Bessler I will court the advertising media again as I did in 1997 but I have nothing to offer them at this point so there is nothing to new to engage them. I don't know how we can engender new interest but we must keep trying.

PS. Note the American spelling in the title - I love all those 'z's!  As did Bessler.
JC

Wednesday 14 September 2011

Another bunch of clues interpreted

Recently I said that I would comment occasionally on one or two of Bessler's clues, so here is another one I've been working on. This one is my interpetation of the strange passage which follows:

“He will be called a great craftsman,
who can easily/lightly throw a heavy thing high, 
 if one pound falls a quarter, 
it shoots four pounds, four quarters high.”

Firstly, the most obvious point is that if one pound falls a quarter and lifts another four pounds then we have a total of five pounds and those who are familiar with my work in decoding Bessler’s clues will at once recognise the presence of the ubiquitous number 5 again - which I have suggested refers to five mechanisms.

Secondly, he implies that there are five one pound weights (one plus four), but one of them is falling. Since one of the falling weights is one pound and the other four being lifted are also one pound each, all five of them are of equal mass - one pound each.

Thirdly it follows that if one of the weights was falling and four were rising, then there were either five one pound weights in total, alternately falling and being lifted again - or there were ten one pound weights, operating in pairs within the five mechanism, five falling and five rising. I suggest that there were in fact five pairs of similar weights, and the reason I think this, is because elsewhere he says,

 “... a work of this kind of craftsmanship has, as its basis of motion, many separate pieces of lead. These come in pairs, such that, as one of them takes up an outer position, the other takes up a position nearer the axle. Later, they swap places, and so they go on and on changing places all the time.”

This description supports my contention that there must have been ten one pound weights operating in five pairs.

Fourthly, if  "..it shoots four pounds, four quarters high,” then one pound is shot one quarter high, which is no big deal from a similar weight falling the same distance.

Fifthly, "...if one pound falls a quarter, " it means it falls 90 degrees. If a pendulum is placed upside down against a clock face with the weight at twelve o'clock, then it can only fall in total, 180 degrees, or half way around the clock to the six o'clock point. If it falls a quarter then it only falls from twelve o'clock to three o'clock, 90 degrees.

It should be also be remembered that when the bi-directional Kassel wheel was started from a stand still it required only the smallest of pushes from two fingers for it to begin to accelerate, BUT it was also reported that rotation did not begin until a single weight was heard to fall, hence the phrase "...if one pound falls..." , meaning that it only takes one pound weight to fall for the whole wheel to begin to rotate and therefore cause the other weights to move.

There is one more piece of information in the passage which I am still working on but I don't want to discuss it at this time.

The above quotation is an extremely clever piece of text containing a wealth of information and I believe there are other pieces which may also contain additional information if we only knew how to extract it.

JC

Saturday 10 September 2011

Updates and words that unintentionaly offend

Recently, I intimated that I had a small revelation to make - and now I have written it up on one of my websites. I haven't published it yet, but now I'm wondering if I'm right, and if I am, should I be broadcasting it, and if I'm wrong do I want to stick my head up above the parapet to get shot at again?

Its not much of a revelation, I think that word was used by another blogger who used it when I mentioned that I had something else to discuss. I had what I think was a moment of clarity just before I went on holiday and nothing I have done since has dispelled the feeling I have that I'm right - but as I always say, I've been there before - and been wrong before! So I'm making a video to show the effect which I have described on my web site (not published yet) and I'll include it there. I mention this now because I've had a couple of emails asking me when I'm going to reveal it, but I'm not ready yet.

On another subject, writing blogs and responding to comments can be a tricky business, and I am as careful as I can be not to upset people and if I discovered that someone had taken offence at my words I would be extremely sorry. I have always requested that people moderate their language and try to do myself. Recently I discovered that someone had felt personally insulted at my words and I regret that, I therefore offer my sincerest apologies - they know who they are. May I say that having read and reread my words I can find nothing to take offence at, in fact they appear to me to be supportive of that person's view so I am at a loss to understand where I have overstepped the mark. Perhaps a private communication to explain would assist my understanding?

JC

Tuesday 30 August 2011

J.E.E.Bessler -> W.R.R.Orffyres

Having time away from all things Bessler while on holiday, allowed me time to think and mentally review many things I had speculated upon. One of them was Bessler's use of his pseudonym - Orffyreus.

I have spoken about the fact that Bessler was born with just one forename, Elias. About the time he invented his working wheel he adopted the pseudonym, Orffyreus, using the 'Albam' method - at the same time he added two additonal forenames, Johann Ernst. I think that the Hebrew 'Albam' method of encoding these names is familiar to everyone interested in this story. I had always thought that having two 'E's as his initials was meant to point to the numbers '5' or '55' which are present in encoded form seemingly throughout his publications. However there has always been a disquieting feature to this idea which has caused me some doubt as to my interpretation of it.

For a start in this case, the fact that Bessler used the Albam alphabetic substitution rather than alphanumeric susbstitution to obtain his pseudonym, suggested that the former is to be used and not the latter, in which case the fact that 'E' is the fifth letter of the alphabet is no more than a fortunate coincidence.

In addition, converting the intials J.E.E.Bessler through 'albam' results in W.R.R.Orffyres, and the 'W' is formed from two V's which, in Roman numerals, produces the number '55' again and to suggest that the two 'E's represent the '5's too, seems almost tautological (if there is such a word!). Seriously is it likely that Bessler would have used the letter 'J' for any other reason than as part of an albam code? He could have left the 'J' out and used alphanumeric substitution to get '55'. So the letter 'J' is important but so is the letter 'R' which is derived via the 'albam method from 'E'.
You can see Bessler's own version of the letter 'W' above left, which differs from those used in the fraktur font - except when used to point a finger at his enemies, Gartner, Wagner and Borlach, taken from Apologia Poetica, the metaphorical passage!!!  It is definitely two 'V's.

So the letter 'J' leads us to the letter 'W' which points to 55. Now if the letter 'E' is not deliberately included to point to 5, then it points to 'R', its albam equivalent. Bessler routinely signed his name with a large 'O', presumably short for Orffyreus; he included a dot in the middle so it could also represent his wheel. But then he added two letter 'R's, one on either side of the 'O', the left one pointing the wrong way. This appeared to represent a wheel supported by two 'R' shaped figures.

Artistic as this may seem, there has to be more to it than sheer artistic vanity. It was important enough to add new forenames to his pseudonym, and the number 55 was of great importance to him as is clear from the many occurences of it, so one must conclude that the letter 'R' was of at least equal importance. The only thing I can conclude from my own research is that it has to refer to the path of the weights. One weight moves through a short curved circle and the other one moves through a longer less curved circle.

I have my own theory about how this helps and I am writing my ideas out in detail and I will post them when they are done. I'm considering doing another video to explain graphically what I mean, but if anyone else has any thoughts about the letter 'R' and its meaning I'd love to hear it.

JC

Friday 26 August 2011

Planes that go bump in the night - when skimming a hurrican.

Three weeks away in sunny Florida and no access to my workshop - and my wheel! But now I'm back and eager to bring a fresh approach to the task thanks to some imaginitive thinking while away.

Although I love roller coaster rides I suffer from a fear of heights, motion sickness and a compressed disc which gives me pins and needles in my left leg, so by the time we had come to the end of our stay I had had a surfeit of thrill rides, so when we discovered that hurrican Irene was bearing down on us just as we were due to board our aircrafte, my wife and daughter expressed their doubts at the wisdom of flying through the middle of a hurrican, in rather colorful language actually!

We were assured by the aircrew that we would be flying around Irene and not through her and there were, therefore, no grounds for concern - huh!!! A sudden drop of 200 feet without warning, may not seem much, but when you add in the air speed of over 500 miles an hour it acquires considerable significance - my head bears the bruises to show for it, as I had just risen from seat in my usual gentlemanly fashion to allow my wife to partake of the facilities provided by means of a restroom. That was just the beginning and we suffered about an hour and half of something not so different, I should imagine, from trying to stay on board a bucking bronco!

Tough devices these modern aircraft! Despite the wings flapping like a demented duck landing on a pond, we all arrived safely if somewhat bruised and were politely informed that we had made up some time despite taking a longer course due to the sling-shot effect engendered by skimming the edge of hurrican Irene! Hhhhmmmm - as my seven year old grandaughter is wont to say, "I smell a porky, grandad!"

Actually the sling-shot idea came up in conversation aboard the bronco and we thought it had merit, but then we had taken a few medicinal drinks to calm my wife's shattered nerves - not mine of course you understand.

Open for comments again and hopefully I shall have some interesting information to share with you all that miiiiiiiiight just lead to a break through - unless you prove me wrong of course.

JC

Friday 5 August 2011

Gravity-alone is all that is required for Bessler's wheel

This isjust a parting shot as I'm going away for a couple of weeks and all comments will be hidden until I return.

The source of energy for Bessler's wheel has to be gravity and nothing else, for some pretty obvious reasons.  Bessler certainly implied that it needed only gravity, but even if you  stick to the physics we have been taught, that such a device is impossible, and that Bessler was toying with us, then you need an additional force to assist the wheel to complete one rotation.   So what forces are available to us?

Ambient temperature changes might have been used to make changes in the weight positions - too slow to react in my opinion and perhaps not enough of a movement to generate overbalance.  Centrifugal force is another posited force but it would be difficult to regulate when to apply its theoretical movement.  Magnets?  Too weak and too difficult to switch on and off.  Compressed air?  It has to be compressed first and that would use up precious energy before it can apply itself to moving a weight.  Springs?  These are delayed reactions created by compressing them a some other stage in a rotation thus using up energy again.  Electrostatic forces? The Leiden Jar was invented in 1745 by Dutch scientist Pieter van Musschenbroek of Leiden, who some will remember featured in my book, "Perpetual Motion; An Ancient Mystery Solved?"  Again too weak a force and it would take too long to build up sufficient force to move a weight in several rotations let alone a single one.

There are others which are even weaker than those described briefly above and not readily adapted to quick or sudden requirement.  In my opinion gravity-only offers the only solution and I know why it works and why it isn't impossible and why it won't make the slightest difference to the laws of physics and all of the ramifications connected to that statement. 

All will be revealed upon my return  - I hope  ;-)

JC

Sunday 31 July 2011

Bessler's wheel must have been driven by gravity alone.

Someone posted a link on the bessler forum, in support of their view saying "all forces in closed systems are conserved. It's widely available knowledge."  The implication seemed to be that because of this fact we were all wasting our time trying to duplicate Bessler's wheel.


The first line of the link says "In physics, a conservation law states that a particular measurable property of an isolated physical system does not change as the system evolves."

You can't argue with this - it is demonstrably true. However it doesn't apply to Bessler's wheel. Isolated systems are, as the definition suggests, closed sytems without any access to external sources of energy.

But in a gravitywheel such as I maintain, Bessler's was, if you take away the gravitational force the wheel will remain stationary, therefore it cannot possibly be described as an isolated system. Gravity is external to the wheel.

So although the law of Conservation is correct the particular ramifications alluded to, do not apply in this case.

It is frequently argued that Bessler did not state in precise language that his wheel depended entirely on gravity and therefore it must have required some additional force to operate. I don't think anyone has come up with a creditable alternative force and in my opinion there isn't one - there is only gravity and there is no physical reason why it should not do.

So Bessler may have only said that - "these weights are themselves the PM device, the essential constituent parts which must of necessity continue to exercise their motive force (derived from the perpetual motion principle) indefinitely - so long as they keep away from the cemntre of gravity." - but that is as close to saying it was driven by gravity as you can get without actually saying so!

I have argued this point since I first expressed it in my book, "Perpetual Motion; An Ancient Mystery Solved?" in 1997 and I see no reason to change it.

JC

Friday 22 July 2011

Why the number 5? What does it mean?

In a recent comment, Andre reminded me of something I have become so used to that I had forgotten how extraordinary it is. He said; It's monumentally obvious that the number 5 had a very special and important meaning to Bessler. It pops up everywhere."

I think this is something that people forget or are unaware of or disregard - and yet Johann Bessler was so preoccupied with the number five that he inserted it or hid it,in every single document he published as well as many that never saw the light of day, until recently.

Everyone is familiar with the pentagram and its association with the number five, and Bessler certainly was, because it too, appears, or should I say, is hidden within, many of his drawings. Hidden it may be, but it is easily found once you are aware of his fondness for it. Space prevents me from detailing all the many coded references to the pentagram and the number 5, but you can see some of the evidence at my website http://www.theorffyreuscode.com/

So the question is; why did Bessler include so many references to the number 5?

I suggested that it was to tell us that a gravity-driven wheel, capable of driving another device, has to have five mechanisms to accomplish the task. I also considered it likely that it was intended as a pointer to the most comprehensively encoded text of all of Bessler's publications, chapter 55 of his "Poetica Apologia".

Bessler became known as 'Orffyreus' at about the same time he first exhibited his wheel, a single-direction one, in 1712. So at that time he must have already decided on a simple code, alphabetic substitution, to use as a pseudonym for Bessler, probably designed to suggest that at least he had an interest or was knowledgeable about such things. In addition he added two more forenames to his given one, which was "Elias". The names, "Johann Ernst", do not appear on his birth registration documents but a glance through my website at http://www.theorffyreuscode.com/ shows how he also introduced the same 'number five' theme into his pseudonym at or before the time he first exhibited his wheel.

It seems to me that he must have already decided to encode information about his wheel so that, at some point in future, he would be able to show that he was the original inventor, long before he was successful - and to me that is a likely scenario as I have been guilty of the same!

So does the number five relate to the wheel or the code or something else? The problem is that the number five and the pentagram have several connotations. In fact they hold so many commonly understood, subjective cultural and emotional associations, in addition to their explicit or literal meaning, that the potential for misinterpretations are boundless. Connections include,the golden section, Mary Magdalen, the planet Venus and Freemasonry, to mention just some  the morer diverse ones.

I think that Bessler found the best way to produce a gravitywheel which was suffiently powerful to be able to drive an additional piece of machinery, such as a water pump. This design required five mechanisms for reasons which I will discuss in a later blog. Five then formed the core of his subsequent code. He built a large dual direction wheel at Kassel, which required two lots of five mechanisms - one for each direction - hence the ubiquity of the two number fives i.e."5,5". What better use of "5,5" than to write his autobiography "Apologia Poetica", incorporating his code into Chapter 55 and inserting numerous pentagrams into the drawings in other documents.

How delightful to fill the ensuing book and all his drawings with veiled references to the his mysterious number 5s - and sit back and watch as others pored over the clues and tried to make sense of them!

JC

Sunday 17 July 2011

Maybe Karl described the simplicity of the concept, and not the wheel itself.

I suppose I should mention this on the Besslerwheel form but it doesn't seem to warrant a new thread; it's just my musings again.

When Karl's emissary, Nathaniel von Stapff, first approached Bessler with a view to checking out his claims, he must have made it clear to Bessler that in order to take advantage of the Landgrave's patronage, he would be required to reveal the secret, under an oath of silence of course, of the wheel's construction. Clearly this was a highly contentious issue for Bessler and yet he was persuaded to accept, the issue molified to some extent by the promise of 4000 thalers for the privilege.

So before Karl could even consider such a proposal he had to verify to his own satisfaction that Bessler's wheel actually worked, and since the Kassel wheel would not be finished for several months, and the previous, Merseberg wheel, had been destroyed, the wheel Karl saw must have been the small model mentioned two or three times elsewhere.

This small model may have been Bessler's first fully working model or even one which showed some rotation without providing enough to drive another device and it could only turn one way. It may have been the same one that was found in pieces after his death, and the same one that Jean-Pierre de Crousaz wrote somewaht sarcastically about. So when Karl described its simplicity he was probably describing the basic concept and not the interior of the Kassel wheel.

It is evident that Karl was heavily involved with matters of State and probably never took time to view the interior of the larger wheel, so one might conclude that although the concept appeared extremely simple to Karl, as he examined the model wheel - and that idea was born out by Bessler's own fears that any potential buyer might think he deserved his money back once he knew the secret, in fact the actual working model might have been considerably more complicated.

By complicated I mean that, whereas I have always maintained that Bessler indicated that five mechanisms were necessary to a fully functioning wheel, there might have been as few as two in his model version - a very simple concept and an ideal method of constructing a proof of principle version.

JC

Monday 11 July 2011

Principle of connectedness, and is five necessary?

Interpreting Bessler's principle of connectedness is a bit like knitting smoke. You can see it but you can't seem to grasp it. I thought I'd got it before, but now I think I really have! But have I? I think so but who knows at this point.

You can read the words 'principle of connectedness' and surmise that it refers to a degree of connection. Is it a vaccilating connection, sometimes fast and sometimes loose? Is it a flexible connection only capable of connection in one direction? Might be. There are several possibilities, but I think I understand what he was referring to now and if I'm right it doesn't in fact refer to the way the actual connections are made, in my opinion refer it refers to something else. I once thought I had found a feature of gravitywheels which no-one else was aware of. Then I met a guy who had come from Australia and had dropped into meet me and we discovered we were both aware of this oddity. I have seen comments which come close to what I'm thinking of but no one seems to have accurately described it. Of course it might not be as mysterious as I'm thinking, but I'm going to write something on the subject and post if for comment.

The other thing that concerns me - am I right in thinking that Bessler was indicating five mechanisms? I still think so, but testing five mechanisms on a wheel takes so much longer because I have to build each of them and attach them, whereas if I just wanted to test the hypothesis with two it would be so much quicker. But Bessler said "If I arrange to have just one cross-bar in the machine it revolves very slowly...", so will my two produce enough mechanical advantage to at least provide proof of the principle? Another rhetorical question for which the answer must be, try it and see.

JC

Tuesday 5 July 2011

When Bessler's wheel is reconstructed it will match his design exactly.

Recently, a blog or so back, I mentioned that I had found additional confirmation that my design was correct, in one of Bessler's clues. This led me to consider my other interpreted codes and I found further examples which consolidated my view that I was on the right track. Ruminating on this while on holiday I was struck by the curious lack of interest in Bessler's codes, and I realised that as far as I can tell, there are few who support my work on this subject.

I know that the interpretation of these kinds of codes is highly subjective and prone to being influenced by personal prejudices. In other words, I may appear to be guilty of interpreting the facts to fit the theory, or finding what I'm looking for by ignoring equally valid alternatives. Where I have thought that this was possible in some of the interpretations I have posted at http://www.theorffyreuscode.com/, I have admitted that this might be the case, and have said that the results are more speculative. In other cases I have had no doubts and have said so too.

In which case I am surprised to see comments from time to time, on the besslerwheel forum posing possible solutions to apparent codes for which I have already offered my own interpretations and which I am satisfied are correct. Of course they may simply disagree with my views, but sometimes it seems as though other people are unaware of my work in this area and perhaps I should be doing more to broadcast it. Those who follow my progress (or lack of it!) in reconstructing Bessler's wheel might think that I should get on with finishing it, rather than encouraging people to read my decoding efforts just in case they get there first. But I am trying to cover all outcomes including one where I am stuck, or unable to finish the wheel for some reason beyond my control.

I have another website at http://www.orffyreus.net/, where I have published everything I have found which may lead to the decoding of Chapter 55 in Bessler's 'Apologia Poetica'. It seems to me that my descriptions of my work in deciphering that extraordinary document are certainly a step towards full decipherment, yet no one has commented on it and as far as I know, no work is being done on it.

The methodology needed to recognise and decipher these numerous clues is straight forward. It should be obvious by now that I have deciphered far more than the limited amount I have revealed on my websites so I can say with a considerable degree of confidence that what is there is genuine, unless I have said that it is speculative. When I have more up-to-date information that requires additions or amendments to what is there I have added it.

I am writing a long document detailing the additional information concerning both the concept and the design revealed in Bessler's clues, and it will be published once I have succeeded in reconstructing Bessler's wheel. This will prove to those who say that we shall never know whether any new design is in any way similar to Bessler's, that they are wrong and that my design configuration is exactly the same as Bessler's.  I am confident that the design will match Bessler's because of the information I already have. 

JC

Sunday 3 July 2011

A simple design and a parallell course?

I returned from Spain and found that there were 450 postings on Besslerwheel forum in my short absence! But here's a confession; I am so convinced that I know exactly how Bessler's wheel worked that I have kind of lost interest in other people's theories, and I couldn't face the prospect of going through all 450 postings, so I just looked at the subjects that seemed most attractive to me. I may have missed some interesting comments but it is my impression that most of the ideas which surface there have been discussed previously and more than once.

I suppose this sounds egotistical, but its just a subjective feeling and if I think I'm right then I guess I'm going to think that way. I shall continue to read most of the posts and be interested in any that appear to be closing in on my own ideas, and I'm not so conceited as to think that no one else is working on a parallel course to my own.

Now I'm back I need to concentrate on finishing my proof of principle wheel. It's not as simple as Karl seemed to think, not to build any way, although I'm sure the equivalent of a carpenter's boy today, could make it if he was allowed to study the design for a few minutes. If you can see a finished mechanical system laid bare so all its parts are visible, then I'm sure that in most cases it is easy to understand how it works, but devising the best mechanical arrangement with nothing more than the basic concept to guide you is not so easy. Where in the length of a lever is the best point to attach a pivot? How wide should the angle be that a lever moves through to gain the most mechanical advantgage? Is there a point at which the advantage gained is cancelled out by other reactions? But if all this has been worked out correctly and results in a working model, then to an observer studying the movement, it might indeed look simple and easy to copy.

I have no fear that anyone will gain any insight into my design from the above rhetorical questions, although they apply to my design I don't think that anyone will just stumble on the correct configuration from those few words - unless of course they are on that parallell course!

JC

The True Story of Bessler’s Perpetual Motion Machine.

On  6th June, 1712, in Germany, Johann Bessler (also known by his pseudonym, Orffyreus) announced that after many years of failure, he had s...