Friday 14 June 2019

Help Amy to Walk Again.

I know most of you are aware of my granddaughter’s serious illness, which is officially incurable, but  Amy has a real fighting spirit and is making progress at last.  She has Complex Regional Pain Syndrome also known as Reflex Sympathetic Dystrophy Syndrome in the USA. In addition she has developed Functional Neurological Disorder.  She also has Post Traumatic Stress Disorder.  Before the CRPS appeared she had no health problems at all and lived a normal healthy life, as a teacher.  She taught reception class, the new kids, and they all adored her.  Many of them have donated via their parents and Amy has received many good wishes cards and paintings from the children.


An article on page three of the local paper where my granddaughter Amy lives is available via the above link.  I have put a copy here but it is probably too hard to read.  She lives in Rugby, home of the best sport in the world - Rugby!

The article gives an update on her progress at the STEPS rehabilitation clinic in Sheffield, and they are working a miracle but she has far to go.  Her crowd funding site has raised over £23000 so far, but at £5000 a week, she will need a lot more.

Several people here have been very generous and our whole family appreciate every single donation even if it’s just £5.  We are organising a fundraising event on 12th July at Amy’s old school in Kenilworth, which will have live music, comedians, an amazing raffle and an auction of valuable items.  You can only take part in the auction if you are there.  You can buy tickets from www.helpamy.co.uk

We are expecting one or two celebrities to attend but I can’t say who until we have written confirmation.  Even if you prefer not to donate or have already done so, I would be so pleased if you could share this page or better still her website at www.helpamy.co.uk

Amy also publishes vlogs and these can be accessed via the same web site.

Thank you for your time and patience, normal service will be returned shortly!

JC


Saturday 8 June 2019

Some Clues.....Belatedly!

Following a fair criticism in comments, I have taken on board the suggestion that I should at least have given away some of the clues I used to discover Bessler’s design for his wheel. I have posted several clues over a number of years but for those who missed them, here are some of the ones previously identified plus some I didn’t mention.  These are not necessarily in order.

The first one I wrote about suggested that the note which was found along with the MT drawings did not only refer to the MT but also to any other drawings.  The most instructive drawings have proved to be  those found in DT.  They contain everything you need to know about how to reconstruct Bessler’s wheel - yes, everything.  The point about MT is that it was planned to be a teaching aid, and he added the comment about other drawings when he was arrested.  There was no intention to leave a series of clues in his original design of the drawings, but he added the Toys page to replace some that led to the ultimate design.  They are numbered, but not all by Bessler, so apart from the first 55, there are no comments adjacent to the drawings.

The second one pointed out the existence of the pentagram in not just one of the DT drawings but all of them.

The third one pointed to the existence of a clock within GB and one of the DT drawings.

The fourth one pointed out that the numbers in the above two drawings added up to 660 which when divided by the number of hours in the clock totalled 55.

The fifth one pointed out that the numbers in the two conjoined drawings used the numbers 1 to 10, which also adds up to 55.

The sixth one discussed the inclusion of the extra E for Ernst, added to Bessler’s forenames.  E, the fifth letter of the alphabet, with the atbash cipher applied produced R.  You can see in his logo at the top of this page that he uses two Rs in opposite directions to each other, to support the O of Orffyreus.  The O is sometimes shown as a circumpunct, which represents his wheel.  The reason for its inclusion is because the letter R mimics the path of his weights.  The two opposing Rs also supports my conclusion that the two way wheels were driven by mirror image mechanisms.

The seventh one discusses the addition of the letter J for Johann in his forenames.  When atbashed this produces W.  W is actually double V, which Bessler includes for its use as the Roman numeral for 5 giving 55 again.

The eighth one refers to the large number of NBs and  NBs in AP.  These are designed to point to the shape of the rope which appears in several drawings.  It indicates the path of the connecting rope between two mechanisms.  The italic NB is added to make you question why?  Because italic ones don’t have parallel uprights, just as the actual ropes doesn’t.

The ninth one is extra to the fifth one.  The two conjoined drawings add up to a total of 90, by adding and duplicating numbers in the right hand drawing.  The left side includes a pentagram; 90 divided by 5 gives 18, the base number of every angle possible in the pentagram. 18, 36, 54, 72, 90 and 108.

The tenth one does of course refer to the drawing in AP which I have demonstrated in the orffyreus codes pages, contains a pentagram and nothing more

These ten items barely scratch the surface of Bessler’s ingenuity in providing clues in front of our eyes.  I haven’t even had to look them up I am so familiar with them all. I can spout them all in quick fire delivery because they are so clear to me.  I could give you another ten tomorrow and another ten the day after. 

Why 55? 5 mechanisms, five for each direction,  

 And on another matter:

My granddaughter Amy is in a rehab clinic trying to recover from a series of diseases which suddenly afflicted her about eighteen months ago.  They are CRPS, FND and EDS.  Sorry for the alphabet abreviations but you can google them if you are curious.
 
Please share the following link and/or donate if you wish to aid my granddaughter's treatment.


JC


Bessler’s Wheel and the Orffyreus Code.

As I'm currently away and it is difficult to write blogs on my ipad, I'm reposting a previous blog which is simply a brief description of the the legend of Bessler's wheel.
 
 
  The Legend of Bessler's wheel.
 
On 6th June, 1712, in Germany, Johann Bessler (also known by his pseudonym, Orffyreus) announced that after many years of failure, he had succeeded in designing and building a perpetual motion machine.  For more than fourteen years he exhibited his machine and allowed people to thoroughly examine it.  Following advice from the famous scientist, Gottfried Leibniz, he devised a number of demonstrations and tests designed to prove the validity of his machine without giving away the secret of its design.

After more than thirty years he died in poverty.  He had asked for a huge sum of money for the secret, £20,000 which was an amount only affordable by kings and princes, and although many were interested, none were prepared to agree to the terms of the deal. Bessler required that he be given the money and the buyer take the machine without verifying that it worked.  Those who sought to purchase the wheel, for that was the form the machine took, insisted that they see the secret mechanism before they parted with the money. Bessler feared that once the design was known the buyers could simply walk away knowing how to build his machine and he would get nothing for his trouble.
This problem was anticipated by Bessler and he took extraordinary measures to ensure that his secret was safe, but he encoded all the information needed to reconstruct the machine in a small number of books that he published. It is well-known that he was prepared to die without selling the secret and that he believed that post humus acknowledgement was preferable to being robbed of his secret while he yet lived.
I became curious about the legend of Bessler’s Wheel, while still in my teens, and have spent most of my life researching the life of Johann Bessler (I’m now 74).  I obtained copies of all his books and had them translated into English and self-published them, in the hope that either myself or someone else might solve the secret and present it to the world in this time of pollution, global warming and increasingly limited energy resources.
It has recently become clear that Bessler had a huge knowledge of the history of codes and adopted several completely different ones to disguise information within his publications.  I have made considerable advances in deciphering one of his codes; the simplest one, and I am confident that I have the complete design.  Due to unfortunate family circumstances I am currently unable to complete the build I have undertaken but shall return to it as soon as possible and I sincerely believe that 2019 will see the reconstruction of Bessler’s wheel.
Johann Bessler published three books, and digital copies of these with English translations may be obtained from the links to the right of this blog.  In addition there is a copy of his unpublished document containing some 141 drawings - and my own account of Bessler’s life is also available from the links.  It is called "Perpetual Motion; An Ancient Mystery Solved?"  Bessler published three books; "Grundlicher Bericht", "Apologia Poetica" and "Das Triumphirende..."

I have also published Bessler's collection of 141 drawings and I have called it Maschinen Tractate, but it was originally found in the form of a number drawings of perpetual motion designs. Many of these have handwritten notes attached and I have published the best English translation of them that I was able to get. Bessler never published these drawings but clearly intended to do so at some point.

For some ideas about Bessler’s code why not visit one of my web sites at www.theorffyreuscode.com
One last thing.  Perpetual Motion machines have been utterly proscribed and Johann Bessler’s claims ridiculed - however, it seems that more than a handful of scientists have now come to the conclusion that it might theoretically be possible to design a mechanical system which is continuously out-of-balance and therefore will turn continuously using the repeated fall of weights for energy.  Gravity but not directly.  These open-minded people remain tight lipped for now, awaiting proof of their hypothesis.
 
And on another matter:

My granddaughter Amy is in a rehab clinic trying to recover from a series of diseases which suddenly afflicted her about eighteen months ago.  They are CRPS, FND and EDS.  Sorry for the alphabet abreviations but you can google them if you are curious.
 
Please share the following link and/or donate if you wish to aid my granddaughter's treatment.

www.helpamy.co.uk/

JC

Friday 7 June 2019

A Brief Response to My Fickle Friends.

Despite my concerns about failing to deliver the finished wheel, I felt I had to post something to explain why.  I confess I was not expecting such an angry reaction.  I suppose I should have realised that many people had high expectations of learning some interesting information which they might not know and I let them down.

I won’t be making any more commitments, I’ll just get on with my build.  I only made the promise in order to try and drag myself out of the mood of procrastination which was a feature of the general air of despondency which has enveloped our family over the last eighteen months.  It worked to a degree but was not sufficient to allow me to complete my self appointed task on time and I bitterly regret deciding to go public with such an important commitment, it was a mistake and one I won’t be repeating.

I am grateful to those who made supportive comments encouraging me to continue.  Those others are welcome to leave, they will not be missed.  

I have lived and breathed Bessler since I was about fifteeen years of age, in fact a quotation by Swami Vivekananda sums up my attitude.  He wrote, "Take up one idea, make that idea your life. Think of it, dream of it, live on that idea. Let the brain, muscles, nerves, every part of your body be full of that idea, and just leave every other idea alone.  This is the way to success,"

So the many disparaging comments from people I believed were friends, in response to my honest admission, have reignited my determination to finish what I started. I suppose I should thank them but I won't, because I'd have finished the project in due course any way.

Please share the following link and donate if you wish to aid

  my granddaughter's treatment for CRPS, FND and EDS



JC

Wednesday 5 June 2019

Update for 6th June 2019

Today’s the day I am supposed to reveal all, but unfortunately I haven’t finished my wheel yet although it's nearly done.  I’m sorry I’ve missed my date for proclaiming a finished and working wheel and then revealing all, and I know there will be some amongst you who will doubtless, see this as just another  broken promise.

I had my doubts about putting a firm date down for completion of my wheel, but my primary reason for doing so was to get a move on and finish the wheel, and I thought I’d have enough time to complete the task.  But there is so much going on in my private life that time for wheeling has been limited.

I am going away for three weeks so I won’t be doing any work on the wheel ‘til I return, but I have very little left to do and without making any more specific promises when, I expect to keep my commitment as soon as possible after my return.

Mine was a voluntary commitment which I took seriously and to miss the date by one day or one month makes me feel both sad and disappointed.  I obligated myself to reveal all whether the wheel worked or not and I stand by that commitment, and as soon as the wheel is finished, I will honour it.

I believe that explaining how I interpreted Bessler’s clues and deciphered his code, will help many of those who believe in Bessler to attempt to reconstruct his wheel, but without a working wheel, the rest of the world will simply ignore my revelations.  For that reason I prefer to try to finish a working wheel which will do far more to attract more attention, than a booklet by an unknown amateur.  This is the design I am convinced will work, but if it should fail I will publish everything as per my original commitment.

I apologise to all those who were expecting a revelation today, it will have to await my return.  I will post details both here and on the besslerwheel forum, as soon as I have something to publish.


Please share the following link and donate if you wish to aid

  my granddaughter's treatment for CRPS and FND


PS.  Comments so far seem to assume my wheel has failed to work, because I was unable to provide a video and photos, but I ran out of time to finish it and there is no doubt in my mind that when it is finished it will work.  I understand the scepticism and I intend to prove I'm right at the earliest opportunity.

Perhaps I am like a leopard and I cannot change my spots, but then I have never made a public committment before, only revealed my intentions and sometimes they can go astray.  I write what I believe to be the truth and I would never have gone public in such an assertive way if I didn't intend to carry out the details of that commitment.

JC

Friday 31 May 2019

Bessler’s Wheel - The Future

When I first sought a publisher for my biography of Johann Bessler, I was asked to include a final chapter outlining the potential for Bessler’s wheel. I did add a short chapter on how I thought things might develop. This was over twenty years ago and things have changed considerably in that time, nevertheless my earlier suggestions are not too dissimilar  to my current thinking.

First we must establish the potential power from a wheel measuring, say six feet in diameter and less than one foot wide.  In my opinion turning in one direction is all that is necessary.  I cannot think of any advantage in designing a wheel which can turn in either direction.  I believe a bi-directional wheel would reduce the amount of power or speed available compared with a uni-directional device.

My research into Bessler’s connectedness principle has led me to conclude that in that particular feature of the mechanical arrangement there is much potential to re-engineer the design to increase the wheel’s power output.

Those who believe that the amount of power available from Bessler’s wheel  would be insignificant, seem determined to devalue the potential uses to which his machine could be put.   I on the other hand, see tremendous opportunities for such a device and I am certain that we shall see some amazing developments coming from the hands of those with more imagination.

Besides increasing the mass of each weight, Bessler implies that there can be more mechanisms, the reasons I think this, I will go into when I publish my forthcoming document.

There are many ways to increase the efficiency of the original Bessler wheel, indeed the inventor himself claimed to be able to make several wheels of differing size and power output and we have no reason to doubt his word. I can see possible ways of altering the kind of output obtainable and I look forward to seeing what happens in future.

I have discussed the potential for using a driven Bessler wheel to power an inertial thruster.  I have even debated it’s potential with some well-regarded people within the space exploration field and their final conclusion was yes, that would be of great interest, but first you have to prove it can be done.  An inertia driven space craft would undoubtedly be an attractive proposition.

The most immediate  benefit to be obtained from a Bessler’s wheel is in the urgently sought reduction of carbon emissions required worldwide.  If Bessler’s wheel can be shown to be a viable alternative to current energy production then I think the entrepreneurs, inventors and creative thinkers will run with it.


                                               Please share the following link and donate if you wish to aid
                                                     my granddaughter's treatment for CRPS and FND
 
                                                                         www.helpamy.co.uk/

JC

Friday 24 May 2019

Update on My Progress Towards 6th June 2019

I’m continuing to work on finishing my version of Bessler’s wheel.  There is the occasional hiccup such as finding that I didn’t make the MDF disc big enough to contain the mechanisms!  It does not matter because even if they overlap the edge of the back plate, as long as they have enough of the backplate to provide somewhere to attach the various bits, it will be ok.  I must raise the two support pillars to increase the height of the axle above the base so that any parts which do stick out beyond the edge of the backplate don’t strike the base.

There are some angles and lengths of the various levers which are more difficult to assess correctly. It’s hard to explain in words but when you come to make your own version you will understand why I say this.  Bessler said that he had  (paraphrasing) got things to a state where an ounce or two out, did not affect the working of his wheel.  I hope I know what he meant! Apart from these very minor problems, the construction continues and I anticipate a successful proof of principle wheel.

My plan includes publishing my book on the deciphering of the coded information.  The book contains over 30 diagrams and more thant 50 pages of text. It is not finished yet so I am also working on that and hoping to finish it by the same date.  I suppose you could call it a booklet, or as Bessler called his Apologia Poetica, 'this little book'.  I intend to video the finished wheel and hope, of course that it works.  In any case I will post the video even if it doesn’t work, so I can demonstrate how it’s supposed to work!

I’m also taking time to visit my granddaughter Amy who is currently in a special clinic in Sheffield where she is combating the awful disease, Complex Regional Pain Syndrome which is supposed to be incurable. She also has something called Functional Neurological Disorder, which means that she has now lost the ability to hold her head up, sit up or walk. There is only one way to make progress and it involves intense exercise, removal of all analgesics and the acceptance of  pain which is worse than childbirth or amputation of a limb without anaesthetics.  But Amy is a spirited girl and it is my hope that we can raise enough money to allow her to continue at the clinic for as long as it takes to get her back to some kind of normality.  This is the impetus for my determination to see this wheel in action so that I can raise whatever finances will be needed.

Amy is also my number one supporter of all things Bessler, so she named her dog Bessler!  Hes a Hungarian Vizsler and has been accepted as a service dog, which means he can visit her in hospital. 

Amy will be 26 this weekend so we, her family, are going to visit her and bring some more support and encouragement.


 Please share the following link and donate if you wish to aid
                                     my granddaughter's treatment for CRPS and FND
                                                                  www.helpamy.co.uk/

JC

The True Story of Bessler’s Perpetual Motion Machine.

On  6th June, 1712, in Germany, Johann Bessler (also known by his pseudonym, Orffyreus) announced that after many years of failure, he had s...