Bessler-Collins Gravity Wheel

The time is approaching for me to finish my wheel and show that it works (or not!) and share my design with everyone. Obviously I hope it will work, but if it doesn’t it will be my fault.  As I’ve said before, my skills as an engineer have long since withered so-to-speak, it being some 45 years since I worked at Rolls Royce aero engines and before that British Aerospace on Concord, and I did five years in the Royal Air Force, so I have struggled somewhat to get to grips with one piece of the mechanism.  I know how it works and what it does and I can explain its function, but getting the pieces to work as required was proving difficult.

I’ve called my design the Bessler-Collins Gravity Wheel because I believe that it matches Bessler’s design concept 100 per cent and the actual construction is perhaps 95 per cent similar.  I’m sure this is correct because I obtained the design by finding and deciphering Bessler’s codes.  I cannot claim to have discovered the design myself, because I could not have found it without his amazing wealth of clues. I am referring to it as a gravity wheel, because calling it a perpetual motion machine conveys the wrong impression and attracts negative responses.  It may not be using the force of gravity directly, but that force enables the machine to run continuously.  

Karl the Landgrave of Hesse, described the machine as simple.  I’m sure he understood exactly how it worked having seen it in action, but believe me when I tell you that it has a number of tricks up its sleeve which are not readily apparent to the observer. I’m not even sure how it can be simulated but I’m no expert and I know people who do know about sims, so I hope they can replicate the machine on a computer if only to prove my design concept is correct.

JC

The Solving of Bessler’s Wheel.

The search for the secret of Bessler’s perpetual motion machine continues unabated.  It is impossible to prevent the same wrong ‘solutions’ being found time after time, it is in the nature of this occupation that people tend to work alone and therefore there is every likelihood that each one will travel the same path as the previous one, making the same discoveries and the same mistakes.  But there some basic assumptions routinely made which I believe will turn out to be wrong.

The physical laws which we are told, prevent the possibility of Johann Bessler’s wheel working as he claimed, are correct in general, but the fact that the established laws are correct doesn’t mean that we can’t use the falling of objects of mass, caused by gravity, to generate rotation and thus electricity ultimately.  We keep muttering the same phrase, “gravity is not a source of energy” parrot fashion, but this stark fact implies a number of assumptions which overlook the ramifications of this force or field - the terminology is confusing and confused. I’m sure it is correct that gravity is not a source of energy, but despite that, we use it as an energy source every day, everywhere in the world.  Running water to drive any number of energy consuming devices and weight driven clocks.  Of course you have to have a plentiful supply of water, or the ability to raise the weights again. Strictly speaking it doesn’t supply energy to these forms of motion, but enables them to move in its presence

In 1841 Julius von Mayer stated that  “energy can be neither created nor destroyed, but it can be converted from one kind to another”, of course gravity is not an energy source and we haven’t found a way to turn it on or off yet but its action can be converted into energy of another kind. What about magnetism?  Magnetism can be described as a force or field too. but it has no energy of its own.  It is extremely useful for converting energy from one form to another.  Most of the energy derived from fossil fuels, nuclear and hydroelectric energy and wind comes from systems using magnetism in the conversion process.

Gravity too, can be described as a force or field and has no energy of its own, but it is also widely used for converting potential energy into kinetic energy - by enabling things to fall.  Magnetism requires motion to move electrons along wire, so we use spinning turbines for instance to push the electrons through circuits past magnets.  To make the turbines spin we use running water, courtesy of the effect of gravity.  So even though magnetism is a vital ingredient of our electricity we still need falling water, or wind etc., to turn the turbines.

So the ingredient necessary to all gravity operated motion is available to us, but so far we have to rely on an inexhaustible supply of water, for example in our hydroelectric generators.  Where gravity supplies potential energy, we have to rely on either a huge falling distance - or something or someone repeatedly lifting the weights back to their starting position.

My point is that there’s no reason to deny the possibility of using gravity to generate electricity, we just need to find a way of lifting the fallen weights back up again.  It’s no good saying it can’t be done, we know Bessler did it, we know Karl validated his machine and we know, instinctively that there is a way. We have even know what the solution needs to include - a design which breaks the symmetry which has always maintained a stranglehold on every design we have come up with.  

JC

Johann Bessler Videos

I’ve have added one or two videos to this blog because I think they are informative and interesting  .... and one of them is mine!

The latest one is by wubbly on Besslerwheel forum.  It shows the comparative sizes between Johann Bessler’s four recognised wheels, or perpetual motion machines. 

https://youtu.be/l1PEs1Jcg1s

Other examples of hypothetical perpetual motion machines have also been simulated by wubbly here.

https://www.youtube.com/channel/UClhx8haHQn-9zgoZKzYss0A

I am also a fan of Valeriy Ivanov’s work, the man behind the Visual Education Projects who produces videos of apparently working versions of many hypothetical perpetual motion machines.  Each are beautifully demonstrated with perfect models, but which are discretely driven by hidden motors.  You can see his work here.

https://youtu.be/rnKjv9hnepE

My own videos include this one which I made many years ago which goes some way to pointing out the coded material and giving a brief account of the legend of Bessler’s wheel.

https://www.youtube.com/watch?v=5BWVKtpuzn0

A few years ago, I was invited to be interviewed in Rome for RAI TV for a documentary about Johann Bessler, but although I was interviewed at length, most of my contribution was cut and my remaining words dubbed in Italian.  The main object of the film was to introduce various ‘experts’ who dismissed my point of view and suggested that Bessler was a fraud, not too surprising given the long established view of majority.  Here’s a link to the video.

https://www.youtube.com/watch?v=LpCRxk4YPaI

There are many other videos which I could link to, but these are some that I like. I have not linked to any simulations here, partly because there are so many, but also because none of them prove anything, other than a particular design concept doesn’t work.  Simulations are popular, and I’m told they can save much time in constructing mechanisms and testing them, but for me they remove the intense personal hands-on experience and intuitive understanding which can only be gained by building everything with your hands.

If anyone can point to an interesting video of Bessler’s wheel maybe showing interesting mechanisms, I might be inclined to add it to this blog.

I have been working on deciphering and interpreting Bessler’s codes and hints for several years, but no working wheel yet.  During this journey I have frequently put together a mechanism I ‘got’ from Bessler and it failed but just by moving it by hand and making alterations I learned stuff which would never have occurred to me if I just relied on sims, with the result that I have the whole design concept in construction right now.  I use pencil and paper to work out an arrangement and then I  build it. Having a build right in front of you gives you the opportunity to make alterations, both minor or major and leads towards deeper understanding.

As for my own reconstruction, I’m ploughing on with it, slowly but surely and I’m still aiming for completion in September, only four weeks.

JC

Update - More Clues Deciphered.

I guess I owe an update on my mission to finish my reconstruction of Bessler’s wheel and publish the result in September.

Frustratingly, I discovered the solution to Bessler’s wheel more than two years ago, but it was just the concept and not all of the detail. In fact I didn’t ‘discover‘ it,  I found it in Bessler’s clues.  Although I had managed to extract much of the design from his clues, that is where I got stuck. I thought I had identified all of the clues I needed and yet there were problems making some parts of the mechanism work in the way I had planned it, according to the concept I had found. I knew if I was right then Bessler must have provided useful hints for every problem encountered, by providing clues showing the correct solution, but it was a struggle to identify more clues and interpret them correctly, it was like pulling teeth! But slowly, bit by bit I found them and got to understand their meaning and eventually I knew I had the whole thing worked out and ready for assembly.

Under the best conditions the design calls for skills and equipment I no longer have, but I’m carrying on with my amateurish efforts and I’m hopeful that I’ll finish soon.  Even with the clues there are still  occasions where trial and error are necessary, and progress happens in fits and starts.  Some clues don’t become meaningful until the build has progressed to a certain point, and then realisation suddenly illuminates one’s mind.

According to the solution certain actions needed to take place but try as I might I was unable to make one movement in particular, act as I expected and it has taken me until this year to understand how it works. It works in a counter-intuitive way, but I had unconsciously applied assumptions to its action which turned out to be wrong and prevented my seeing it moving as required. My own thoughts or preconceptions had guided my expectations which blinded me to the truth and obstructed the desired result.  But I got there in the end.

One thing is certain, I would never have been able to conjure up this design myself, it is no wonder no one apart from Bessler has ever succeeded. Karl the Landgrave’s opinion that it was very simple is misleading; if you watch a mechanism working you can get an understanding of how it works,  but, although Karl clearly understood what he was seeing, he had never actually made something himself so may not have understood how difficult it would be to build. . Watching Bessler’s mechanisms in action would be fascinating (and will be I hope!) but to see and realise all the complex interactions that occur very quickly could take a lot longer than a few minutes of study. 

Finding and decoding all of Bessler’s clues requires patience and imagination, something I’m not so well equipped with at my age, and although I am sure I am right, in the end I might make a mistake, a simple error, which is why I’m so determined to get all of this work out into the public domain. You can be the judge. Of course I hope to have a working model to prove my work, but if it fails I’m sure there will be enough information for someone to succeed.

I know I’ve said this before, but anyone who thinks we’ll never know how Bessler’s wheel worked can think again, he left information about every aspect of his wheel. To us it looks obscure and ambiguous, but clearly Bessler was worried that someone might easily understand his clues if he made them any easier, so he placed a number of clues in various places and styles and then hid them under an invisibility cloak!

One more thing.  Many people have suggested that a sim would prove once and for all whether the design I’m working on would work, that may be so, I have little experience of them, but I think that a sim of my design would prove quite difficult to make.  I can’t remember seeing any sims with such complex actions. Perhaps a more sophisticated software or experienced simulator could manage it.

Still seeking donations for Amy’s crowdfunding page at
https://www.gofundme.com/f/help-our-amy-to-walk-again

https://gf.me/u/ymprif

For news and videos of my granddaughter Amy who is suffering from CRPS, FND, PTSD and unable to walk and who’s left hand has suffered from fixed contracture you should take a look at her TikTok page. She has over 28,000 followers and climbing!

She is improving, particularly in her attitude to recovering from this nightmare disease.

NB Today, 24 August, just three weeks since I posted this blog, Amy now has over 50,000 followers, and 1.2 million likes!

                                               https://www.tiktok.com/@amyepohl

    https://www.gofundme.com/f/help-our-amy-to-walk-again

JC

The Legend of Bessler’s Perpetual Motion Machine

On 6th June, 1712, in Germany, Johann Bessler (also known by his pseudonym, Orffyreus) announced that after many years of failure, he had succeeded in designing and building a perpetual motion machine.  For more than fourteen years he exhibited his machine and allowed people to thoroughly examine it.  Following advice from the famous scientist, Gottfried Leibniz, he devised a number of demonstrations and tests designed to prove the validity of his machine without giving away the secret of its design.

Karl the Landgrave of Hesse permitted Bessler to live, work and exhibit his machine at the prince's castle of Weissenstein.  Karl was a man of unimpeachable reputation and he insisted on being allowed to verify the inventor's claims before he allowed Bessler to take up residence  This the inventor reluctantly agreed to and once he had examined the machine to his own satisfaction Karl authorised the  publication of his approval of the machine.  For several years Bessler was visited by numerous people of varying status, scientists, ministers and royalty as well as hundreds of  local inhabitants.  Several official examinations were carried out and each time the examiners concluded that the inventor's claims were genuine.

Over the years Karl’s health began to deteriorate and his sons decided that it was time for the inventor to leave the castle and he was given five years salary and accommodation in the nearby town of Karlshaven. Despite the strong circumstantial evidence that his machine was genuine, Bessler failed to secure a sale and after more than thirty years he died in poverty.  His death came after he fell from a windmill he had been commissioned to build.  The windmill was an interesting design using a vertical axle which allowed it to benefit from winds from any directions.  

He had asked for a huge sum of money for the secret of his perpetual motion machine, £20,000 which was an amount only affordable by kings and princes, and it’s no coincidence that this sum matched that being offered by the British Government as a reward for the invention of a way to establish a ships longitudinal position  at sea.  Bessler clearly believed his invention was equal in value.  Many people were interested in Bessler’s wheel, but none were prepared to agree to the terms of the deal. Bessler required that he be given the money and the buyer take the machine without viewing the internal workings.  Those who sought to purchase the wheel, for that was the form the machine took, insisted that they see the secret mechanism before they parted with the money. Bessler feared that once the design was known the buyers could simply walk away knowing how to build his machine and he would get nothing for his trouble.  He said that a bag of money should be put on the table and the buyer could take the wheel there and then.  He swore that if he was found cheating he should be beheaded, a not unlikely result if he was found to be a fraud and deceiving his ruler.

I became curious about the legend of Bessler’s Wheel, while still in my teens, and have spent most of my life researching the life of Johann Bessler (I’m now 74).  I obtained copies of all his books and had them translated into English and self-published them, in the hope that either myself or someone else might solve the secret and present it to the world in this time of pollution, global warming and increasingly limited energy resources.




This problem of acceptance by his potential buyers was anticipated by Bessler and he took extraordinary measures to ensure that his secret was safe, but he encoded all the information needed to reconstruct the machine in a small number of books that he published. He implied that he was prepared to die without selling the secret and that he believed that post humus acknowledgement was preferable to being robbed of his secret while he yet lived.

It has recently become clear that Bessler had a huge knowledge of the history of codes and adopted several completely different ones to disguise information within his publications.  I have made considerable advances in deciphering his codes and I am cautiously optimistic that I have the complete design.

Johann Bessler published three books, and digital copies of these with English translations may be obtained from the links to the right of this blog.  In addition there is a copy of his unpublished document containing some 141 drawings, his account of the search for perpetual motion - and my own account of Bessler’s life is also available from the links.  It is called "Perpetual Motion; An Ancient Mystery Solved?"  

Bessler's three published books are entitled "Grundlicher Bericht", "Apologia Poetica" and "Das Triumphirende...". I have called Bessler's collection of 141 drawings his Maschinen Tractate, but it was originally found in the form of a number of loosely collected drawings of perpetual motion designs. Many of these have handwritten notes attached and I have published the best English translation of them that I was able to get. Bessler never published these drawings but clearly intended to do so at some 


I and thousands of others around the world believe that Johann Bessler’s claim to have designed and built a perpetual motion machine, or a continuously rotating device enabled purely by gravity, was genuine.  The circumstantial evidence is compelling.  This device if reconstructed now, could potentially provide cheap clean electricity, and by reducing the need for fossil fuels, provide a huge step forward in reducing carbon emissions in a very short time.

For some ideas about Bessler’s code why not visit my web sites at

www.theorffyreuscode.com  and

www.besslerswheel.com      and

www.orffyreus.net.                and

www.orffyreus.org

For more information go to www.free-energy.co.uk

JC 

Bessler’s Perpetual Motion Machine’s External Energy Source.

When Johann Bessler finally constructed a working perpetual motion machine he was hesitant about labelling it as such.  He stated that the weights within the machine were the actual perpetual motion device, which at first sight looks unlikely, or perhaps there is ap paucity of information.  But he knew from more than ten years of trying to build the machine, that it was the heaviness of the weights which provided the energy to turn the wheel. I should add at this point, everything Bessler wrote was important even if it looked like a throw away comment.  There are always extra meanings to be found within his comments.

The word ‘heaviness’ has the same meaning as ‘ponderance’, a word often used by Bessler - and Sir Isaac Newton used the word ‘gravity’ which translates literally from the Latin, in which he wrote, to ‘weight‘ ‘heaviness’ and ‘ponderance’.  Given that perpetual motion was defined in those days, and still is today, as being an isolated system, having no access to any external energy source, one can understand Bessler’s reluctance to describe his machine as a perpetual motion device.  He wrote that ‘heaviness’ surrounded his world and permeated everything in it and therefore could not be excluded from both within and without his machine, in which case either it wasn’t a true perpetual motion machine, or the definition was wrong to exclude all external energy sources.

But he had little choice if he wished to gain the attention of the rich to whom he wished to sell his wheel. He called it a perpetual motion machine but explained why it might not be correct to label it thus.  He said that no device could ever be perpetually in motion because of wear and tear, or accidental breakdown.  He often referred to it as the ‘so-called perpetual motion’.  He was a clever man who had a good understanding of his machine and how and why it worked.

Given Bessler’s understanding of his machine and the definition of perpetual motion, it’s amazing that numerous examples describing perpetual motion exist on the internet, thus,

“ Perpetual motion is the motion of bodies that continues forever. A perpetual motion machine is a hypothetical machine that can do work infinitely without an energy source. This kind of machine is impossible, as it would violate the first or second law of thermodynamics.”

So, they all state the obvious, that without an energy source such machines are impossible. They ignore Bessler’s strong claim that gravity - an external source - supplied the energy.  Countless times I’ve been made aware that gravity is not an energy source, and I accept it as a fact, but - and I’m going out on a limb here - Bessler attributed his energy source to the weights, the weights fell and through some ingenious mechanism, caused the wheel to rotate. Gravity made the weights fall.  So  gravity did work, and how much work it did can be calculated through a simple formula. So regardless of the fact that gravity is a conservative force, it did do work.  Gravity is described as a force.  Force is defined as the capability to do work.

The only possible reason for not accepting that gravity can be a source of free energy, is the fact that no one ever invented a way to return the fallen weights back to their pre-fall position....until Bessler did.  It was never impossible, just that no one knew how to do it.

JC

The ‘Toys’ Page Revisited.

The ‘Toys’ page provides more clues than one might think. It was the last page in my version of the book MT which was originally found as a loosely bound collection of drawings kept in a box. I believe that subsequently the pages have been re-photographed in a slightly different order resulting in the Toys page not being the last one. In any case it is the last numbered page, having 138, 139, 140 and 141 handwritten in the bottom left corner. I have always imagined that it was inserted by Bessler to replace four pages he removed at the time of his arrest when he wrote on the cover;-

“N.B. 1st May, 1733. Due to the arrest, I burned and buried all papers that prove the possibility. However, I have left all demonstrations and experiments since it would be difficult for anybody to see or learn anything about a perpetual motion from them or to decide whether there was any truth in them because no illustration by itself contains a description of the motion; however, taking various illustrations together and combining them with a discerning mind, it will indeed be possible to look for a movement and, finally to find one in them.”

This action must have been carried out with the intention of providing some kind of clue in case MT was never published. If publication had been achieved then the original pages would probably have been reinserted. This seems to imply that his consistent use of such clues was part of a deliberate plan to hide clues to his construction for the benefit of those who came after, looking for such information.  I do believe that he wasn’t just referring to the drawings in MT but also the ones in his published works, i.e. Gruendlicher Bericht, Apologia Poetica and Das Triumphirende. 

Did he suspect that he might be imprisoned? Possibly, and then his records might become available to anyone of rank, so he replaced them with something less revealing. My research has shown that he was being subjected to considerable pressure from his in-laws and feared that there was a conspiracy to either force him to reveal his secret or to frame him for some fraudulent dealings.

I have inserted a clarified version of the Toys page which has the four page numbers omitted on the bottom and also the number 5 and the short piece of text which was written next the the spinning top which reads, “5. Children's game in which there is something extraordinary for anyone who knows how to apply the game in a different way.”

The letters run from A through to E, five letters. But there are six drawings including the top, which is numbered 5, and not F. Note my red lines which align the separate parts of each drawing, there are five. Could he be telling us - yet again, that there are five mechanisms?

I think the letters are written in anticlockwise order to show which drawing should be interpreted first. You can see that A aligns with B but note that the latter is twisted - the small blobs on the left end of each horizontal on A are shown alternately on the left and right of the vertical line labelled B. But are the two pieces meant to refer to the same item, or are they two different parts? I believe they are two different pieces.

There is also the curious attachment of the two rods or levers at the top of the figure B. It must be important otherwise he wouldn’t  have included it.  Does it show two extremes of an action of one lever, or does it represent two levers?

The pantograph shape of C and D is similar to part A, but not to B. There are two Cs and two Ds which suggests that there are two items from the each drawing required for the mechanism. But D has a twisted body which might indicate that it should be reversed or turned upside down, or both. C is wielding an axe or hammer with its arms, which might mean it is applying force to something, but D has no arms, is it being made to move rather than moving something else? I should also point out that each of the pantograph elements in A is linked to the next one in the chain.

Was the later addition of the spinning top an attempt to hint that the 'toys' shown, relate to something that spins?  Or was its missing string or cord a hint that string or cord was also required?

In his DasTriumphirende, Bessler writes about the complexities associated with FORM, that is how he writes it, denoting the importance of his message in this passage. My reading of this passage is that a mechanism shown in a drawing may look and seem easily understood, but the intention behind it is to indicate the form or specific shape of a mechanism with a slightly different action.  This agrees with his scribbled note in the Toys page, “Children's game in which there is something extraordinary for anyone who knows how to apply the game in a different way”, and applies in particular in my opinion to the scissor mechanism labelled E.  I think the placing of these ‘toys’ is deliberate and should be taken into account when considering their meaning and Bessler’s intentions.

I don’t think that there is any intention to suggestion that A is meant to indicate a Jacob’s

In view of a recent comment below I’m adding a correct version of the Toys image which has the extended rods on item D shown as they are on the original image. I’ve no idea how this discrepancy occurred but I hope it may help in the end.  Thanks to the anonymous commenter.

JC

Once again I appeal to your generous natures to donate to my granddaughter Amy at her crowdfunding site. I don’t know how aware any of you are about a social networking site called Tiktok, at www.tiktok.com, but Amy is providing an amazing destination for people who have or are suffering from serious illness, urging them to be strong. At last count she has posted over 150 short inspirational videos, has over 11000 followers and 220,000 likes.  If you wish you can go to tiktok and search for amyepohl.  

If you search on YouTube using the same amyepohl you can find some of her earlier videos explaining her condition

To donate please visit
 https://www.gofundme.com/f/help-our-amy-to-walk-again

Thank you!

John Collins News Blog - Update

Please all accept my apologies, but I have been so busy lately that I have struggled to write my blogs in which I wanted to include some of the many clues I have deciphered about Johann Bessler’s Perpetual Motion machine.  So with regret I feel that I have to concentrate on finishing my wheel in the hope that it works and we can finally put this search to rest.  So the blog and its comments will remain in a state of suspended animation until I have either built a working model, or failed to do so.  At that  point I will publish everything I know in the hope that there is enough information in it to allow someone else to finish what I started.

This blog will remain closed to posts and comments until I have completed my reconstruction of Johann Bessler’s wheel. I have promised to finish it by September 2020 and then I will publish details of its design. Even if the device fails to perform I shall still publish the design and assume that the failure is down to my poor workmanship or an error in deciphering Bessler’s clues.

The Legend of Johann Bessler’s Perpetual Motion Machine.

On 6th June, 1712, in Germany, Johann Bessler (also known by his pseudonym, Orffyreus) announced that after many years of failure, he had succeeded in designing and building a perpetual motion machine.  For more than fourteen years he exhibited his machine and allowed people to thoroughly examine it.  Following advice from the famous scientist, Gottfried Leibniz, he devised a number of demonstrations and tests designed to prove the validity of his machine without giving away the secret of its design.

Karl the Landgrave of Hesse permitted Bessler to live, work and exhibit his machine at the prince's castle of Weissenstein.  Karl was a man of unimpeachable reputation and he insisted on being allowed to verify the inventor's claims before he allowed Bessler to take up residence  This the inventor reluctantly agreed to and once he had examined the machine to his own satisfaction Karl authorised the  publication of his approval of the machine.  For several years Bessler was visited by numerous people of varying status, scientists, ministers and royalty as well as hundreds of  local inhabitants.  Several official examinations were carried out and each time the examiners concluded that the inventor's claims were genuine.

Over the years Karl’s health began to deteriorate and his sons decided that it was time for the inventor to leave the castle and he was given five years salary and accommodation in the nearby town of Karlshaven. Despite the strong circumstantial evidence that his machine was genuine, Bessler failed to secure a sale and after more than thirty years he died in poverty.  His death came after he fell from a windmill he had been commissioned to build.  The windmill was an interesting design using a vertical axle which allowed it to benefit from winds from any directions.  

He had asked for a huge sum of money for the secret of his perpetual motion machine, £20,000 which was an amount only affordable by kings and princes, and it’s no coincidence that this sum matched that being offered by the British Government as a reward for the invention of a way to establish a ships longitudinal position  at sea.  Bessler clearly believed his invention was equal in value.  Many people were interested in Bessler’s wheel, but none were prepared to agree to the terms of the deal. Bessler required that he be given the money and the buyer take the machine without viewing the internal workings.  Those who sought to purchase the wheel, for that was the form the machine took, insisted that they see the secret mechanism before they parted with the money. Bessler feared that once the design was known the buyers could simply walk away knowing how to build his machine and he would get nothing for his trouble.  He said that a bag of money should be put on the table and the buyer could take the wheel there and then.  He swore that if he was found cheating he should be beheaded, a not unlikely result if he was found to be a fraud and deceiving his ruler.

I became curious about the legend of Bessler’s Wheel, while still in my teens, and have spent most of my life researching the life of Johann Bessler (I’m now 74).  I obtained copies of all his books and had them translated into English and self-published them, in the hope that either myself or someone else might solve the secret and present it to the world in this time of pollution, global warming and increasingly limited energy resources.




This problem of acceptance by his potential buyers was anticipated by Bessler and he took extraordinary measures to ensure that his secret was safe, but he encoded all the information needed to reconstruct the machine in a small number of books that he published. He implied that he was prepared to die without selling the secret and that he believed that post humus acknowledgement was preferable to being robbed of his secret while he yet lived.

It has recently become clear that Bessler had a huge knowledge of the history of codes and adopted several completely different ones to disguise information within his publications.  I have made considerable advances in deciphering his codes and I am cautiously optimistic that I have the complete design.

Johann Bessler published three books, and digital copies of these with English translations may be obtained from the links to the right of this blog.  In addition there is a copy of his unpublished document containing some 141 drawings, his account of the search for perpetual motion - and my own account of Bessler’s life is also available from the links.  It is called "Perpetual Motion; An Ancient Mystery Solved?"  

Bessler's three published books are entitled "Grundlicher Bericht", "Apologia Poetica" and "Das Triumphirende...". I have called Bessler's collection of 141 drawings his Maschinen Tractate, but it was originally found in the form of a number of loosely collected drawings of perpetual motion designs. Many of these have handwritten notes attached and I have published the best English translation of them that I was able to get. Bessler never published these drawings but clearly intended to do so at some 


I and thousands of others around the world believe that Johann Bessler’s claim to have designed and built a perpetual motion machine, or a continuously rotating device enabled purely by gravity, was genuine.  The circumstantial evidence is compelling.  This device if reconstructed now, could potentially provide cheap clean electricity, and by reducing the need for fossil fuels, provide a huge step forward in reducing carbon emissions in a very short time.

For some ideas about Bessler’s code why not visit my web sites at

www.theorffyreuscode.com  and

www.besslerswheel.com      and

www.orffyreus.net.                and

www.orffyreus.org

For more information go to www.free-energy.co.uk

JC 

The “Great Craftsman” Phrase Deciphered.

In his Apologia Poetica, Bessler included many textual clues, some encoded and some merely ambiguously phrased so that getting the true meaning from each was a struggle. This one is puzzling and in my opinion, has led to a misunderstanding of what he meant, however in the following explanation I believe the meaning becomes clear.

He wrote, “a great craftsman would be he who can lightly cause a heavy weight to fly upwards, or as one pound falls a quarter, cause four pounds to shoot upwards, four quarters.” This seems on the face of it to be nonsense and yet by picking it apart one can get at the meaning.

Note that within the quote he mentions that there are five weights; i.e., one plus four, and each one is equal to one pound. Secondly, one pound falls a quarter. How do we define what he meant by a quarter? In this case he was referring to a clock and a quarter of an hour meant 90 degrees. How could this single fall cause “ four pounds to shoot upwards four quarters”? 

It is very simple. In the first part above, the word ‘quarter’, referred to, not just 90 degrees but also to a clock. In the second part the word ‘quarter’ also refers to a clock but this time he has confused us by using the words ‘four quarters’. ‘Four quarter’s equals ‘one whole unit’. Each hour on a clock is divided into 30 degrees, so the words ‘four quarters’ meaning ‘one hour’ as used here equals thirty degrees. To paraphrase Bessler’s words, “a great craftsman would be he who, as one pound falls 90 degrees, causes each of the other four pounds to shoot upwards 30 degrees.”

You might think it would have been better to have said that when “one pound falls 90 degrees, it causes one pound to shoot upwards 30 degrees”, but that would have removed the information that five weights were involved, so it had to be four weights plus the one, and he liked to obfuscate otherwise it would have been too clear.

When he suggested that this advice would be understood by a great craftsman, I think he meant that it was possible to grasp his meaning if you recognised that at first sight it was impossible, and therefore you would have the mechanical knowledge to realise it, and work out the real meaning, and he was also informing us that those two angles were an important ingredient in the mechanism. Such a strong mechanical advantage would certainly ‘shoot’ a weight upwards ‘lightly’.

PS - Some people think I have never published any clues, except those on www.theorffyreuscode.com but you may be surprised to learn that I published this interpretation in a blog dated 14th October 2011, and the clock in September 2016 and many others at other times.  It’s  amazing to think I published this interpretation almost ten years ago and I see people are still trying to make four pounds shoot upwards by causing one pound to fall the same distance! I’m beginning to wonder if it’s worth publishing any more until I’ve finished my wheel.  Until you see the final design the clues are largely meaningless and I’m not going to publish any of the really useful ones until I’ve completed my own wheel!  I apologise if this is disappointing, but I hope that it won’t be long before I finish the wheel and I can publish it all and await the reactions.  

JC