Tuesday 28 May 2013

Invention suppression or merely paranoia

The suppression of alternative energy inventions has long been a cherished bĂȘte noire in this field of research.  I noted some comments on the besslerwheel forum on the subject and because I hadn't looked into it for several years I did a quick survey via google.  I came across the same old stories about various amazing discoveries in the field of energy, the benefits of which we should all be enjoying, but which were apparently suppressed by Federal Government, Big Oil, Big Energy, MIBs or the inventor himself.  The problem I have with this informaton is that it seems to consist of recycled information - and the authors and their subject matter, seem to be the same ones I read about over ten years ago; there's very little that's new.

There are two kinds of suppression described, one is where the invention is taken by guile or force and buried and the inventor dies or disappears in mysterious circumstances; and the other is where the inventor himself is 'bought off', or paid an attractive sum of money or benefit to drop his research and remain silnent to the end of his days.  The latter is hard to prove or disprove since the mechanics of the action would prevent such knowledge being known - other than as hearsay or gossip and that in my opinion probably applies to all of it.

I confess that I find all accounts of suppression of any sort highly suspect but as I suggested, the very nature of the supposed suppression would be tend to create that effect I suppose.

On the other hand I have been in regular contact with professor Hal Puthoff for many years and we have often discussed the perceived problem of 'big brother' control of new energy systems and he has made strongly persuasive arguments against such reported suppressions.  I'm sure that there are some who will say that professor Puthoff would take that point of view and express it forcefully, because he was at one time one of a number of scientific advisors to the US government on energy research.  However given his own work in related fields and his considerable support for other amateur reseachers as well as my own efforts in bringing information about Johann Bessler to public view, I'm satisfied that he would not support any kind of suppression.

Google can produce over one and half million webpages on suppressed inventions and despite looking through dozens of them, I came to the conclusions that what such websites display owes more to paranoia than actual evidence.  Without exception each author modifies his introduction with such words as 'Some examples may be cause for scepticism', and this apologising in advance for the so-called facts which are about to be paraded for our benefit, and which are in the main indigestible, is understandable.  Of course this incredulity which they invoke should not negate their validity but their very ubiquity does raise the suspicion in ones mind that they are all copying each other and perhaps the original source for the information has been forgotten.

Knowing the intense pressure experienced by all commercial interests to find a money-making scheme to increase profits etc, it is scarcly credible that any of them would bury a new idea.  The only area of doubt, it has been suggested, is the government - any government - they, it is claimed, have a vested interest in suppressing anything which might affect their tax revenues accrued from the sale of petroleum products. However, given the rapid depletion of oil reserves and its likely eventual affect on the tax-take anyway, and the fact that they are all actively seeking an alternative to which they can attach another form of tax revenue which could be equally profitable for them and without the concomitant disadvantages of its predecessor, does throw doubt on that assumption as well.

For those who think that the oil companies would like to suppress any new energies, remember the no-doubt apocryphal, comment by one oil CEO, 'Burning gasoline is like keeping warm by burning Rembrants!'  Remember that one 42-gallon barrel of oil creates 19.4 gallons of gasoline. The rest (over half) is used to make over 6000 items and you can see a list of just 144 at http://www.ranken-energy.com/Products%20from%20Petroleum.htm  petroleum is not just used for fuel and the bi-products are of far greater value than gas.

Finally, however effectively the inventions were suppressed in the past, and in my opinion that fact is of doubtful authenticity, it would prove extremely difficult to do so now, with social networking, forums and online document storage and other facilities available via the internet.

JC

10a2c5d26e15f6g7h10ik12l3m6n14o14r5s17tu6v5w4y4-3,’. 

Thursday 23 May 2013

Size need be no object.


I don't know why some people believe that Bessler's wheel would prove to be too weak to produce sufficient energy to be of any practical use.  

Take a look at this project, http://www.rarenergia.com.br/

It is huge!  The two brothers, Ribeiro, from Brazil have been in touch with me from time to time over many years, but when I saw their latest venture I had to rethink my ideas about the size of Bessler's wheel and how big it would have in order to be really useful. I have no idea of the value of their project but seeeing the pictures of it got me thinking and when I considered the sizes of various energy devices throughout history, I realised that Bessler's wheel could be whatever size it needed to be to produce useful electricity.

John Rowley designed and built a new tidal wheel to pump water to Windsor Castle, from the river Thames, nearly three hundred years ago. I quote from the records 'John Rowley, master of mechanicks, for making a dam before and behind the engine, for clearing the old foundation, for setting down a new frame,  for the new wheel of twenty-four foot diameter and twelve foot broad; for the new brass engine with brasses to the crank, forcing rods and a new crank etc' . OK it's just a tidal wheel for pumping water, but the size was not a deterrent, even 300 years ago.

Newcomen's engine had an enormous beam, over 20 foot long in some instances, and capable of pumping hundreds of gallon of water a minute, albeit using an excessive amount of coal,and it was incredibly inefficient.  But making it big enough was not a problem, even three hundred years ago

More recently, Aldo Costa's wheel - about 60 feetr in diameter - is huge and of doubtful use for energy, but the size did not deter him and he wished to build one of over 150 feet in diameter!

My point is this.... if Bessler's wheel produces any energy at all .....then it can be scaled up to produce a useful amount of energy, and if the size of the Kassel wheel could only produce a small amount of electricity then the wheel could be made big enough to do the job required.

Karl the Landgrave wrote that , 'He [Bessler] has no doubt that once the sale of the machine has been accomplished, a much bigger machine can be built provided that more space is made available and more assistants employed.'

Bessler himself suggested that it should be possible to construct a machine over 35-40 feet in diameter and there is no reason why several such machine could not be supported on the same axle.  If size is limitless then so is the potential power it could generate.

JC

10a2c5d26e15f6g7h10ik12l3m6n14o14r5s17tu6v5w4y4-3,’.

Saturday 18 May 2013

Restrain your excitement and your need for approbation, or suffer from premature affirmation!

I've strived to understand how Johann Bessler produced what appeared to be a continuously-turning wheel, sometimes called a Perpetual Motion machine, and in doing so I've suffered from a variety of psychological stresses. Some  don't believe in Bessler's claims but are intrigued to know how he fooled everyone, both then and now.  They make their opinion clear and in turn receive the brickbats from those others equally vociferous in defence of the legendary inventor.  Others such as myself, are firmly of the opinion that his claims were just and honest and I've spent my life seeking the answer to this puzzle but from the stand-point that he knew the real secret to perpetual motion.

As a researcher I spend every hour available for research, striving to be the one who succeeds in the search.  This is not necessarily due to a desire for fame and fortune, though I cannot think that anyone would reject some kind of recogition for success. Neither do I blame anyone for seeking those attractive rewards which should be given to that person who finds success in this rather limited field.

Politicians often fall back on something they refer to as 'received wisdom'. Basically it is the official, stuffy, unimaginative and conventional viewpoint. And it sometimes turns out to be wrong. In this field of endeavour it is the idea that a gravity-enabled wheel that turns continuously is not possible.  Speaking for myself, I am desperate to prove that the received wisdom is wrong and many times in the past I have posted on forums my personal conviction that I am about to prove it, only to find that I was wrong.  Even as far back as 1997 I thought I had solved the mystery and having said so publicly, received many scornful comments and suggestions  that I should either put up or shut up.  These responses hurt at the time but experience teaches us humility and the wisdom to know when to keep silent and let only the successful machine speak for itself.

I am frequently surprised to read so often of others who make the same mistake that I made - and I still do in private conversations!  Why is it so hard to control the exuberance, excitement and utter certainty that I'm on the verge of success?  Why can't I restrain this strange desire to trumpet my news abroad before I have the certainty of a working wheel? It doesn't seeem to occur to me at the time, that everyone feels that they are on the verge of success, or have had a revelation that they believe will lead to success

I confess I don't know, and I have to admit to suffering mild irritation when reading such comments as appeared recently on the besslerwheel forum and from time to time here on this blog.  Let people tell the world after they have the proof, and not before. Without the working wheel there is nothing to shout about.  

If I succeed in building a besslerwheel you will only know of it when it is running, and not before.

JC

10a2c5d26e15f6g7h10ik12l3m6n14o14r5s17tu6v5w4y4-3,’.

Thursday 16 May 2013

Thought for the day - String's the thing!

I have long believed that Johann Bessler used some cord, or string if you prefer, in each of his mechanisms.  I'm sure that this statement will please at least one contributer to this blog, but I insist that there was only one cord per mechanism.  In his Apologia Poetica, XLVI, Bessler included a strange passage which contained the following comment :-
The dog creeps out of his kennel just as far as his chain will stretch.
This has always seemed to me to describe a flexible link from the 'kennel' to the 'dog', and a piece of chain is similar to a length of cord in that you can pull with it but you can't push.  It is a reversable, one-way, force transmitter.which can only pull.  In his Maschinen Tractate No 9, Bessler writes
nothing is to be accomplished with any device unless my principle of connectedness is activated.
I think his  principle of connectedness referred to the cord or chain he described in the first quote above.  As I've said before, the word connectedness implies a  degree of connection and also leads one to conclude that two items are indeed connected, no matter that it is not a rigid connection.  What would be the point of such a connection?

If the 'dog'  'creeps' out of its kennel, it seems like a slow action as if it is dragging a weight. Before this action Bessler writes:-

cat slinks silently along and snatches nice juicy mice
This looks like  a much quicker action and it takes place before the slow action of the dog,  I think the mice refer to weights as do the horses mentioned later in the same passage.  So a quick action followed by a slower one might be the falling of a weight (quick) then the slower replacement of the same weight.

The point of having a flexible connection seems to me to suggest that the weight drives its second weight into the desired position, but gravity is allowed to act in returning it because if the connection is rigid the mechanism will remain balanced.

JC

10a2c5d26e15f6g7h10ik12l3m6n14o14r5s17tu6v5w4y4-3,’.

Saturday 4 May 2013

Bessler's use of the circumpunct in his pseudonym, Orffyreus.

Before you begin, let me say, this is largely speculative!



A circumpunct is a circle with a dot or point in its centre. Bessler used it in place of the letter 'O' in Orffyreus, in almost all of his abbreviated signatures as well as many of his full ones.  The above two are typical examples.  I used to think that it was his own invention and simply represented his wheel, however in the last couple of years I have begun to think there is more to its presence than I had originally thought.  It was, as is the case with every little personal addition of Bessler's, deliberate, planned and with a double meaning. 

The circumpunct symbol has a long history and has represented the sun,  and was the hieroglyphic for the the Egyptian God, Ra.  As a nazar it was believed to protect against the evil eye.  It was the Alchemical symbol for Gold.  Its use dates back to the Hebrews and Egypt and for all I know further back.  It was used by Dan Brown in his book, 'The Lost Symbol', and interestingly has links to Freemasonry, where it was used as the symbol of an Entered Apprentice. This title refers to a junior member of the Freemasons and might apply to Bessler, but for what purpose I do not know. He might have been pointing to some kind of code system used by the Freemasons.  However, I'm not convinced that he was an accredited member, even if he was familiar with much of their history and methods; although he seems to hint at the square and compass in his drawings and of course they are crudely represented on the plaque at Carlshafen, bearing his image. Two of the three famous Rosicrucian Manifestos were published in Kassel and it was always recognised as a centre of Freemasonry and I'm sure that Bessler learned quickly all he could about the subject, given his propensity for doing so in other areas of interest.  I note that in the Masonic Lodge, the emblem is associated with St. John the Baptist and St. John the Evangelist, whose feast days fall on the summer and winter solstices.

In Cabbalistic mysticism, it represented the archangel Michael, - and it is related to the monad, which is a whole new can of worms.

To the Pythagoreans, the point and circle represented eternity, whose “centre is everywhere and the circumference nowhere.” This symbol was used by the Greek philosophers to represent the point of the beginning of creation. From this symbol they evolved towards the additional rules of creation including the Golden Ratio. 

There is one other possible connection and that points straight to Francis Bacon and his bilateral cipher. This alphabet clearly shows the circumpunct and if Bessler was familar with Bacon's work as well as the symbol he would have thought it perfect for use in his signature, both as a link to his wheel but also, possibly, as a link, potentially, to his use of the bilateral code.



I guess it would look something like the above in print:-


and here, just for my own amusement is my name, suitably embellished;



JC

10a2c5d26e15f6g7h10ik12l3m6n14o14r5s17tu6v5w4y4-3,’.





The True Story of Bessler’s Perpetual Motion Machine.

On  6th June, 1712, in Germany, Johann Bessler (also known by his pseudonym, Orffyreus) announced that after many years of failure, he had s...