I've had to re-assess my plans following a lengthy email from the USA, and it's bad news guys - at least for me anyway. My American contact has decided that although he is curious to see what my paper says, he says he wouldn't be able to form an opinion on the theory detailed in it, without seeing it demonstrated at least in some small way, by means of a working model.
This, he says,is because, according to his current understanding, there is no place for such a machine within the laws of physics. So even though my paper describes how the machine can be explained within those same laws without any conflict, he has made his position clear and I have had to accept that only a working model will persuade him (and anyone else) otherwise.
It may be partly my fault that his thoughts have crystallised along this path, because I asked him what would be his next course of action should my paper convince him that I was right. He explained that even if he thought my theory had merit he would not be able to take any further steps unless I could provide some sort of physical evidence that my theory was based on experimental data rather than mental gymnastics ( my words, not his). Upon consideration I realise that this has been the case all along and I had allowed myself to be persuaded that he would be convinced by my theory and that that alone, would be enough to start the ball rolling (or the wheel spinning!).
I understand his point of view especially considering that he may be in touch with many people such as myself from around the world, all of whom are convinced that they know the secret of Bessler's wheel and are eager to share their thoughts with him. I, of all people, should have remembered that only a working model would ever convince anyone - I've given the same advice to other people often enough - so if I can't share my theory unless it's backed by some kind of mechanism that goes some way towards proving it, then so be it. I must get back into the workshop and try and try until I succeed - or not.
This raises some questions in my mind. My American friend signed an NDA and agreed not to discuss the paper with anyone else, so how could he have initiated some engineering work based on the paper without discussing the project with anyone else? I would have to obtain NDAs off each person involved in building my prototype. If I was able to follow that route and it was found to have worked; how does one proceed then? I don't know. I know that I have his support if I was in that circumstance and could supply him with what he needed, a working model, but I haven't, so there is only one course to follow - build it myself or publish everything and let everyone else build it. If I publish it how do I get some intellectual property protection; some return for my efforts? Patent? Too expensive; may be already covered by prior patent or easily circumvented; not sufficient world coverage (unless you're already a millionair); not acceptable as a gravity-driven device to be taken seriously by patent offices - etc, etc.
So whether it be pride, greed, paranoia or a fit of the sulks - call it what you will, there seems little point in sending my paper to my American contact nor publishing it yet.
Re-evaluating my intentions has been useful to me and I am going to take a little more of this precious time we have at our disposal to continue with my work and hope I can complete my self-imposed mission. Obviously there has to be a cut off point at which I will have to publish, but as I had thought that sharing my paper with my American friend was almost the ultimate path open to me if I didn't make the working model, I now find myself in the position of preferring to continue for a little longer before I give it all away. I have a cut-off point in mind and I will probably adhere to it, but I better not say what that is for fear of having to over-ride it - again!
I intend to remain quiet from now on about my future intentions at least, because I have put my foot in my mouth too many times already! I will keep those who are interested updated about my progress.
JC
This, he says,is because, according to his current understanding, there is no place for such a machine within the laws of physics. So even though my paper describes how the machine can be explained within those same laws without any conflict, he has made his position clear and I have had to accept that only a working model will persuade him (and anyone else) otherwise.
It may be partly my fault that his thoughts have crystallised along this path, because I asked him what would be his next course of action should my paper convince him that I was right. He explained that even if he thought my theory had merit he would not be able to take any further steps unless I could provide some sort of physical evidence that my theory was based on experimental data rather than mental gymnastics ( my words, not his). Upon consideration I realise that this has been the case all along and I had allowed myself to be persuaded that he would be convinced by my theory and that that alone, would be enough to start the ball rolling (or the wheel spinning!).
I understand his point of view especially considering that he may be in touch with many people such as myself from around the world, all of whom are convinced that they know the secret of Bessler's wheel and are eager to share their thoughts with him. I, of all people, should have remembered that only a working model would ever convince anyone - I've given the same advice to other people often enough - so if I can't share my theory unless it's backed by some kind of mechanism that goes some way towards proving it, then so be it. I must get back into the workshop and try and try until I succeed - or not.
This raises some questions in my mind. My American friend signed an NDA and agreed not to discuss the paper with anyone else, so how could he have initiated some engineering work based on the paper without discussing the project with anyone else? I would have to obtain NDAs off each person involved in building my prototype. If I was able to follow that route and it was found to have worked; how does one proceed then? I don't know. I know that I have his support if I was in that circumstance and could supply him with what he needed, a working model, but I haven't, so there is only one course to follow - build it myself or publish everything and let everyone else build it. If I publish it how do I get some intellectual property protection; some return for my efforts? Patent? Too expensive; may be already covered by prior patent or easily circumvented; not sufficient world coverage (unless you're already a millionair); not acceptable as a gravity-driven device to be taken seriously by patent offices - etc, etc.
So whether it be pride, greed, paranoia or a fit of the sulks - call it what you will, there seems little point in sending my paper to my American contact nor publishing it yet.
Re-evaluating my intentions has been useful to me and I am going to take a little more of this precious time we have at our disposal to continue with my work and hope I can complete my self-imposed mission. Obviously there has to be a cut off point at which I will have to publish, but as I had thought that sharing my paper with my American friend was almost the ultimate path open to me if I didn't make the working model, I now find myself in the position of preferring to continue for a little longer before I give it all away. I have a cut-off point in mind and I will probably adhere to it, but I better not say what that is for fear of having to over-ride it - again!
I intend to remain quiet from now on about my future intentions at least, because I have put my foot in my mouth too many times already! I will keep those who are interested updated about my progress.
JC
