Wednesday 16 October 2013

Out of ideas? Cross bars and parametric oscillation?

It may have been noticed that the number and frequency of blogs has sharply diminished of late, and the reasons are several.  Subjects relating to Bessler are getting harder to discuss as the finishing line looms closer.  Writing about the subject without giving away anything about my research limits what comments I can make and it is clear that the Besslerwheel forum is suffering from the same affliction; people are running out of ideas to discuss.  I am also keenly aware that every time I make a statement such as I believe that  I am on the final stretch towards the finish, I sound like every other would-be winner of this race to exhibit the first gravity wheel in 300 years.

I often read comments on the besslerwheel forum which seek to affirm certain suppositions as facts and which I at least know are incorrect.  My problem is that when I know for certain that they are wrong I am unable to make any comment to correct this impression if it relates to anything which might give away the principle which I have discovered lies at the heart of the Bessler wheel.

How do I know with such certainty that they are wrong?  I can best answer this with an example.  It has often been stated with considerable self-assurance that we will never know if the wheel, when the solution is eventually found, will be the same configuration as Bessler's.  I can state with equal certainty that we will know, because I have already found enough evidence to convince everyone that the design lies there for all to see if only they can put the correct clues together.  Remember Bessler's word found written across the first page of Bessler's Maschinen Tractate; 

N.B. 1st May, 1733.  Due to the arrest, I burned or hid all the woodcuts that prove the possibility.  However, I have left all demonstrations and experiments since it would be difficult for anybody to see or learn anything about a perpetual motion from them or to decide whether there was any truth in them because no illustration by itself contains a description of the motion; however, taking various illustrations together and combining them with a discerning mind, it will indeed be possible to look for a movement and, finally to find one in them'. "

These words are the important ones, as I have said before - taking various illustrations together and combining them with a discerning mind, it will indeed be possible to look for a movement and, finally to find one in them.

I have found the correct illustrations and have put certain parts of them together to obtain a movement or action that demonstrates the principle.  I found the principle which, by the way, involves parametric oscillation as suggested by Scott many years ago on the forum - and also, independently, by professor Hal Puthoff in private correspondence with me several years ago - from other clues in Bessler's drawings, but I have to say that I discovered the Bessler-Collins principle myself first and then found it confirmed in a drawing by Bessler.

You may say, "where is the wheel then?" which is a fair question and I can only tell you that it is being worked on.  Knowing the principle alone is not sufficient and the delay in finishing it lies in deciding how to arrange just one cross bar or cross or crossing to make the principle work.

Speaking of cross bars,  Creuz, the word used by Bessler, and translated as cross bar, has a multitude of meanings and could refer to clubs, as in playing cards, or sharps as in music, or traverse, or of course the letter X - or it might just refer to the shape of a cross in the design of his mechanisms, but in the end it seems to indicate how many mechanisms he employed.  One was scarcely sufficient to turn the wheel but more worked better.

I shall continue to write blogs but they need more care in presenting my thoughts, given that the solution would be so easy to give away, and - selfishly, I admit - I would like to be the one who succeeds with my own version of Bessler's wheel.  As I've promised before, the work I've done will be published if I can't succeed soon so until then I shall keep reconfiguring the mechanism until it does what I want - or give up!

JC

10a2c5d26e15f6g7h10ik12l3m6n14o14r5s17tu6v5w4y4-3,’.

The Real Johann Bessler Codes part one

I’ve decided to include in my blogs some of the evidence I have found and deciphered which contain  the real information Bessler intended us...