The Legend of Bessler's Wheel

I have replaced my usual blog with a brief account of the legend of Bessler's wheel as I am  currently too busy to devote time to writing.  My apologies to my readers and I promise I will be back as soon as possible.

JC


The legend of Bessler’s Wheel began on 6th June 1712, when Johann Bessler announced that he had invented a perpetual motion machine and he would be exhibiting it in the town square in Gera, Germany, on that day.  Everyone was free to come and see the machine running.  It took the form of a wheel mounted between two pillars and ran continuously until it was stopped or its parts wore out. The machine attracted huge crowds.  Although they were allowed to examine its external appearance thoroughly, they could not view the interior, because the inventor wished to sell the secret of its construction for the sum of 10,000 pounds – a sum equal to several millions today.

News of the invention reached the ears of high ranking men, scientists, politicians and members of the aristocracy.  They came and examined the machine, subjected it to numerous tests and concluded that it was genuine. Only one other man, Karl, the Landgrave of Hesse-Kassel, was allowed to view the interior and he testified that the machine was genuine. He is a man well-known in history as someone of the greatest integrity, and  the negotiations between Bessler and Karl took place against a background in which Karl acted as honest broker between the warring nations of Europe; a situation which required his absolute rectitude both in appearance and in action. 

There were several attempts to buy the wheel, but negotiations always failed when they reached an impasse – the buyer wished to examine the interior before parting with the money, and the inventor fearing that once the secret was known the buyer would simply leave without paying and make his own perpetual motion machine, would not permit it.  Sadly, after some thirty years or more, the machine was lost to us when the inventor fell to his death during construction of another of his inventions, a vertical axle windmill.

However, the discovery of a series of encoded clues has led many to the opinion that the inventor left instructions for reconstructing his wheel, long after his death.  The clues were discovered during the process of investigating the official reports of the time which seemed to rule out any chance of fraud, hence the  interest in discovering the truth about the legend of Bessler’s wheel.

My own curiosity was sparked by the realisation that an earlier highly critical account by Bessler's maid-servant, which explained how the wheel was fraudulently driven, was so obviously flawed and a lie, that I was immediately attracted to do further research. In time I learned that there was no fraud involved, so the wheel was genuine and the claims of the inventor had to be taken seriously.

The tests which the wheel was subjected to involved lifting heavy weights from the castle yard to the roof, driving an Archimedes water pump and an endurance test lasting 56 days under lock and key and armed guard.  Bessler also organised demonstrations involving running the wheel on one set of bearings opened for inspection – and then transferring the device to a second set of open bearings, both sets having been examined to everyone’s satisfaction, both before, after and during the examination.

So the only problem is that modern science denies that Bessler's wheel was possible, but my own research has shown that this conclusion is wrong.  There is no need for a change in the laws of physics, as some  have suggested, we simply haven't covered every possible scenario in the evaluating the number of possible configurations. 

I have produced copies of all Bessler's publications, with English translations.  They can be obtained by clicking on the appropriate links on the right.

JC

10a2c5d26e15f6g7h10ik12l3m6n14o14r5s17tu6v5w4y4-3,’.

Back from Spain and almost missed Gonzalo!

My apologies for not responding to any comments.  I've been in Spain for a couple of weeks and was unable to comment although I did read all of them.  The weather was perfect, wall-to-wall sunshine temperature always around 28 C or 82 F.  Plenty of the juice for those who like to occasionally imbibe the fruit of the grape (and I do!) - occasional being daily of course.  I read that the hurricane would have petered out by the time it came to England so it was something of a surprise to learn that most of an 60 foot tree had landed in our front garden!

When I returned this morning and discovered that a tree had fallen into our front garden, narrowly missing the house I was just thankful that I left my car at the airport and that no one was in the drive or driving past when it fell.

View of tree before it was removed, thanks to local Warwickshire News.  Three other trees fell due to the effects of the tail-end of hurricane Gonzalo and three people did die when trees fell on them

Below is a photo I took from near our house of  the avenue a year ago; they always replace fallen trees in the avenue  There are 116 trees in total so it's quite a task to look after them.  You can see a tree which had been replaced because its predecessor had fallen in the Spring last year.  The trees are about 60 foot tall and I'll know how old they are when I've got around to counting the rings on the fallen one!  They are lime trees and have been up for a long time, but they sometimes fall when the wind is gusting over to 70 mph.

Anyway back to Bessler with my next post.  Those occasional flashes of inspiration we all get from time to time, hit me while I was away and I have a change of opinion to tell you about but nothing too dramatic!

JC

 10a2c5d26e15f6g7h10ik12l3m6n14o14r5s17tu6v5w4y4-3,’.

Did Bessler's wheel begin to turn spontaneously?

 I know I've covered this briefly in the past, but an email I received, suggesting the writer knew that Bessler's wheel was not permanently out of balance prompted me to rehearse my arguments against that conclusion again, here.

According to Johann Bessler, his wheel would begin to turn as soon as the brake was released.  This statement is supported by witnesses.  But some people have suggested that Bessler stopped the wheel at a certain point so that the wheel would begin to spin as described because it was stopped at a point where its internal mechanisms were in an overbalancing position.

However it is reported that the visitors to the wheel were allowed to stop and start the wheel as often as they wished, and I 'm sure that someone would have commented on the fact that the wheel had to be stopped in a certain position for it to begin to rotate of its own accord - and without a push - if that was the case.

If this spontaneous start was only possible when the wheel was in a certain position, then that implies there were what I might call flat spots during each rotation.  If the wheel was only out of balance on either side of these flat spots then the wheel would turn unevenly, but the witnesses all noted the extreme evenness of its rotation.

Also when the wheel was lifting the weight of 70 pounds from the castle yard to the roof, the flat spots would have become much more obvious.  In an unloaded rotation the impetus from the overbalancing portion of each rotation would carry the wheel  over the flat spots but when under load they would be emphasised and, I repeat, the very even running of the wheel was noted, I think we can believe what Bessler told us, and that is that the wheel started spontaneously.

If a state of permanent imbalance existed in the first two wheels then the latter two wheels, capable of being rotated in either direction, would, with mirror image mechanisms, remain in a state of balance until manually started.  This implies that rotation was generated by the movement of the weights, and the alternative mirrored set of mechanisms moving in reverse, might add a braking effect but not cancel the overbalancing caused by the forward moving set.  So there were two effects present.

In the one way wheels, there was the initial overbalancing and secondly there was the result of rotation which repeated the overbalancing which had been present initially.  In the two way wheels with the overbalancing not present initially, the mechanisms required to be in motion before they could begin to overbalance the wheel.   The mirror image mechanisms would not achieve overbalance even when moving in reverse, but they did remove the permanent overbalance present in the one way wheels.

I think it is possible that with fewer mechanism the wheel might have experienced flat spots during rotation but we won't know for sure until some one builds one.

JC 

 10a2c5d26e15f6g7h10ik12l3m6n14o14r5s17tu6v5w4y4-3,’.

The Legend of Bessler's Wheel

The legend of Bessler’s Wheel began on 6th June 1712, when Johann Bessler announced that he had invented a perpetual motion machine and he would be exhibiting it in the town square in Gera, Germany, on that day.  Everyone was free to come and see the machine running.  It took the form of a wheel mounted between two pillars and ran continuously until it was stopped or its parts wore out. The machine attracted huge crowds.  Although they were allowed to examine its external appearance thoroughly, they could not view the interior, because the inventor wished to sell the secret of its construction for the sum of 10,000 pounds – a sum equal to several millions today.

News of the invention reached the ears of high ranking men, scientists, politicians and members of the aristocracy.  They came and examined the machine, subjected it to numerous tests and concluded that it was genuine. Only one other man, Karl, the Landgrave of Hesse-Kassel, was allowed to view the interior and he testified that the machine was genuine. He is a man well-known in history as someone of the greatest integrity, and  the negotiations between Bessler and Karl took place against a background in which Karl acted as honest broker between the warring nations of Europe; a situation which required his absolute rectitude both in appearance and in action.

There were several attempts to buy the wheel, but negotiations always failed when they reached an impasse – the buyer wished to examine the interior before parting with the money, and the inventor fearing that once the secret was known the buyer would simply leave without paying and make his own perpetual motion machine, would not permit it.  Sadly, after some thirty years or more, the machine was lost to us when the inventor fell to his death during construction of another of his inventions, a vertical axle windmill. 

However, the discovery of a series of encoded clues has led many to the opinion that the inventor left instructions for reconstructing his wheel, long after his death.  The clues were discovered during the process of investigating the official reports of the time which seemed to rule out any chance of fraud, hence the  interest in discovering the truth about the legend of Bessler’s wheel. 

My own curiosity was sparked by the realisation that an earlier highly critical account by Bessler's maid-servant, which explained how the wheel was fraudulently driven, was so obviously flawed and a lie, that I was immediately attracted to do further research. In time I learned that there was no fraud involved, so the wheel was genuine and the claims of the inventor had to be taken seriously.

The tests which the wheel was subjected to involved lifting heavy weights from the castle yard to the roof, driving an Archimedes water pump and an endurance test lasting 56 days under lock and key and armed guard.  Bessler also organised demonstrations involving running the wheel on one set of bearings opened for inspection – and then transferring the device to a second set of open bearings, both sets having been examined to everyone’s satisfaction, both before, after and during the examination.

So the only problem is that modern science denies that Bessler's wheel was possible, but my own research has shown that this conclusion is wrong.  There is no need for a change in the laws of physics, as some  have suggested, we simply haven't covered every possible scenario in the evaluating the number of possible configurations.

I have produced copies of all Bessler's publications, with English translations.  They can be obtained by clicking on the appropriate links on the right.

JC

10a2c5d26e15f6g7h10ik12l3m6n14o14r5s17tu6v5w4y4-3,’.