Looking for a modest investment with a guaranteed return? Look no further than Bessler's wheel!

Occasionally, it suddenly hits me, what a massive wall of scepticism faces us in our determination to convince others that Bessler' wheel was a real machine.

To me the evidence is clear, but convincing anyone else is not so much an uphill climb, as a verticle ascent of the severest difficulty with a multitude of overhangs, loose rock and perilous falling boulders - in bare feet!

I think we all understand the difficulties of explaining how it is possible to have a wheel turn continuously, purely from the falling of weights which have to be lifted again at every revolution - we can't ....yet! Hopefully, if you are here, then you probably believe it is possible to achieve this without violating any laws of physics.  You are not alone - I have received, over several years, many emails in support of my contention that gravity-enabled wheels are a legitimate source of power for charging batteries and driving mechanical systems.

Three of those emails have come from professors who were openly supportive of the idea, but left it to me to discover how! Others came from people who wanted to express their support in writing but could not be seen publicly expressing their approval.  Then there are the hundreds who have over the last sixteen years (my goodness, has it really been that long!) supported my efforts and agreed that there is something worth looking into.  The fact that these people are educated and familiar with the laws of physics has given me some optimism that at least a working model would be accepted by them, but what I would really like is for some large company with a decent research budget to take a look at the evidence and put some money into finding the solution.

The amount of money being spent on alternative energies which don't include gravity-enabled wheel is huge and doubly frustrating when our own efforts which cost peanuts in comparison, could revolutionise the energy market overnight once the correct solution is known.

Here are a few figures gleaned from google.  There is, for instance, the failed solar company, Solyndra,  which received $535 million in federal aid before it went bankrupt in 2011, what a waste!

In the California Valley Solar Ranch, a 250-megawatt utility project is being built by NRG Energy on more than 4,000 acres of dry, sun-drenched land in San Luis Obispo County, northwest of Los Angeles. The ranch's 1 million solar panels will provide enough power for 100,000 homes, but at the cost of $1.6 billion — nearly all of which, according to the Times, will be paid for by government subsidies.

Last year, global spending on new renewable energy projects hit a record of $195 billion. According to the analysists at Bloomberg New Energy Finance, annual spending on new clean energy projects will not only surpass that amount in the coming years, but double it. By 2020, annual investments in adding clean energy capacity will reach $395 billion, driven largely by fast-paced growth in solar and offshore wind. Spending levels will grow to $460 billion by 2030, the group said in a report released today.

When is someone going to direct their attention towards Bessler's wheel and inject some of that money to prove that it works?  I know the answer of course, not until someone produces a working model!

JC

10a2c5d26e15f6g7h10ik12l3m6n14o14r5s17tu6v5w4y4-3,’.

Storing electrical energy in liquid air.

On the news this morning: from  http://www.bbc.co.uk/news/science-environment-19785689

Turning air into liquid may offer a solution to one of the great challenges in engineering - how to store energy. The Institution of Mechanical Engineers says liquid air can compete with batteries and hydrogen to store excess energy generated from renewables.  IMechE says "wrong-time" electricity generated by wind farms at night can be used to chill air to a cryogenic state at a distant location. When demand increases, the air can be warmed to drive a turbine.

Engineers say the process to produce "right-time" electricity can achieve an efficiency of up to 70%. IMechE is holding a conference today to discuss new ideas on how using "cryo-power" can benefit the low-carbon economy. 

The technology was originally developed by Peter Dearman, a garage inventor in Hertfordshire, to power vehicles. A new firm, Highview Power Storage, was created to transfer Mr Dearman's technology to a system that can store energy to be used on the power grid. The process, part-funded by the government, has now been trialled for two years at the back of a power station in Slough, Buckinghamshire.

You can see a video of the engine at http://www.youtube.com/watch?v=NOImbv_xcT8

I've posted about this because this technology for storing electrical energy might also be applicable to electricity generated by Bessler's wheel.

JC

10a2c5d26e15f6g7h10ik12l3m6n14o14r5s17tu6v5w4y4-3,’.

The tax advantages of the Bessler automobile.

What follows is speculation based on numbers obtained from a variety of sources and they may be open to question but the basic argument  remains unaffected by any discrepancies later revealed.

I had to fill up my car's fuel tank today and it cost me £75, or $120 US dollars.  Petrol or gas costs upwards of  £1.36 per litre here in the UK, which works out at £5.14 per US gallon, or $8.20.  Suppose that one of us succeeds in replicating Bessler's wheel and further development eventually results in an automobile engine that can replace the traditional internal combustion engine..  

In the UK, about £27.3 billion was raised through fuel tax in 2010/11, so if our little enterprise should result in the eventual demise of the old gasoline engine, or at least to its reduction to an insignificant level, where will the government be looking to find their missing billions? Not hard to guess!  Scary as this thought is, it is going to happen sooner or later regardless of which engine replaces the current ones.  So I'm sure that somewhere some accountant has already worked out how to screw similar amounts from the poor old taxpayer.

I suspect numerous road tolls will proliferate - we don't have many currently, here in the UK - and maybe an annual tax, or excise duty, will be applied to each car, just to be allowed to use it on the roads.  But even if that happens will they find the £27 billions from the, roughly, 31 million cars on the British roads?  And that is a falling figure.  That works out at approximately £840 or $1344 per annum from each driver.  All they (the government) have to do is slap a £1000, or $1600, tax on every car using Bessler's wheel - every year -  and they're covered!  However although that sounds like highway robbery think of the savings in not having to buy fuel.  In 2010 it was calculated that we spent about £1500 a year on fuel for our cars, so there's saving of £500 already!

Of course the Bessler engine will (should) be simpler and cheaper to buy as well as to run, so perhaps it will work out even better for us in the long run...and very much greener.

This is not too serious a comment, just a bit of musing for those interested in the possible long term  potential ramifications of replicating Bessler's wheel.

JC

10a2c5d26e15f6g7h10ik12l3m6n14o14r5s17tu6v5w4y4-3,’.

The purpose of the waxed linen covering and pivot points

Bessler is said to have covered his wheel with waxed-linen. Considering this fact led me on an interesting mental ramble.  

The German words used to describe the cloth covering in Das Triumphirende is leinwand which means canvas/linen/fabric. The other German words used are überzogen, which means  covered/drawn-over; and äusserlicht meaning external/outside.  OK, but in the Latin text he uses the words linteo = linen, cerato = waxed, and vestito = covered/clothed.  So I'm assuming it was waxed linen or canvas.

When I build a test model, I fix everything to a single disc, mounted on a free-spinning axle. The disc is made of medium density fibreboard (MDF) and I can drill holes and fix pivot points and add stops easily.  The only difficulties arise if I need a lever to pass over the top of another pivot point, or another lever with a weight attached to the end.  In those cases the pivot point has to be made shorter to allow the passing lever to pass over it and not get stopped too soon.  It's a bit like watching the hour hand pass over the minute hand of a clock, the hour hand has be nearer the clock face than the minute hand, so it can easily pass over it.

This is all fine and well until you wish to build a more substantial model that will do work - or you need to exhibit it and wish to cover the inner workings.  The obvious thing is to attach another disc to the axle to cover the mechanism and this requires all those pivot points to be attached at their outer ends to the new disc.  Those pivot points that you shortened now need to be repositioned because if you don't they will obstruct the passage of the other lever you had designed to pass over it.  It takes time and trial and error to achieve the new positions without affecting the continued operation of the mechanism and these new positions explain, for me, some of the mysteries about Bessler's drawings.

As for the waxed linen, I think the purpose of using it to cover the sides of the wheel was to hide any clues the spectators might get from seeing the placing of the various pivot points and other fixings.  Without the covering of the waxed linen the positions of all the pivot points would be visible to the examiners and therefore potentially offer clues as to their purpose and action.  

Also, he is said to have introduced a flap in the cloth which gave him access to the interior so that he could remove the weights prior to moving the wheel from one support to another.  But here is another mystery.  To get all the weights out, or at least to get all the weights he could reach, out, he would surely need several flaps?  They couldn't have all been accessible from one position in a twelve foot diameter wheel.  He must had to lock and unlock the wheel as he removed the weights otherwise it would spin until balanced again.  Maybe he had one flap at each weight access point?  It is a pity nobody counted the flaps.

But ... he might have accessed the weights by unbuttoning the edge of the linen, then he wouldn't need a special flap.

JC

10a2c5d26e15f6g7h10ik12l3m6n14o14r5s17tu6v5w4y4-3,’.

Could a carpenter's apprentice really have understood how Bessler's wheel worked?

Johann Fischer von Erlach, in his letter to Sir Isaac Newton's curator of experiments, Desaguliers, wrote of Karl, that "His Highness, who has a perfect understanding of mathematics, assured me that the machine is so simple that a carpenter's boy could understand and make it after having seen the inside of this wheel, and that  he would not risk his name in giving these attestations, if he did not have knowledge of the machine."

Now that is a misleading statement, in my opinion - it wasn't meant to be, but that is how it has turned out.  The problem is that he uses the word 'understand', suggesting that a carpenter's boy could make it after having studied the inside.  The implication being that it is simple and obvious, even to a young inexperienced apprentice.  Apparently Karl declared that he understood it too, sufficiently to risk his good name in saying it was genuine. But if the machine was so easy to understand why has no one thought of the way to replicate what Bessler did, in the 300 years since he proved it was possible?  I think the reason is because there is a principle involved which was overlooked by everyone including Karl.

I think that Karl understood the mechanism but did not appreciate the whole process it underwent in rotating the wheel continuously. This is difficult for me to explain, but I'll try. If I had been able to look at the mechanism in Bessler's wheel and I saw a weighted lever, for example, falling outwards or inwards and in doing so lifting another lever, I might well understand what I was seeing.  I would make an assumption based on what I knew, but if there were restrictions on what could be achieved by the first lever because it might be insufficient to lift the second lever enough, then perhaps a spring attached to the lever being lifted, to assist in the initial lift might be required - but would I have seen the spring?  If I hadn't then I might think the first lever easily lifted the second one; but if I did noticce it, would I make the right interpretation of its use?  And yet without the spring the whole thing might fail.

Having said that I don't think that springs were used in that way in Bessler's wheel.  But I do think that Karl's understanding of the wheel's mechanism was incomplete.  I have good reason for reaching this opinion as I have found a number of intricate requirements and restrictions for the mechanism which are identified in Bessler's drawings but which are not easily recognised without actually building the assemblies - and this, by the way, is the main reason why I think that the efforts to achieve success through simulation alone are doomed to failure.

The second thing is that whatever each mechanisms did, it had to be reversed or reset in order to operate again, to continue the wheel's rotation, but did Karl actually see this other part of the action?  Perhaps Bessler simply said that the action was reversed on the other side of the wheel, but perhaps there were actions which only ocurred on the resetting side of the wheel - in fact, as I have discovered, there were.

Finally, we don't know which wheel Bessler showed to Karl, but I can't really believe that Karl would have waited for six months to allow Bessler time to build the big wheel, before giving the device his blessing, so he must have seen a smaller portable version of the wheel, and this would most likely have been the one-way wheel - a more simple device. 

So I think that Karl was not made aware of this unknown principle which permitted the wheel to work within the current laws of physics. He may have seen it in action but not understood the restrictions imposed on its actions. I know this principle but have not yet incorporated it within a wheel.  I have designed and built a mechanism that performs according to the principle - it does what it's designed to do.  I know people will say that there cannot be a secret principle which obeys the laws of physics and yet works a gravity-only wheel but there is.  It doesn't conflict with any law and the fact that gravity is said to be conservative does not enter into the equation.

JC

10a2c5d26e15f6g7h10ik12l3m6n14o14r5s17tu6v5w4y4-3,’.

Bessler's shared drawing features

I'm posting some of my musings on the various graphical  features in much of Bessler;s work.

I noticed a comment on the besslerwheel forum regarding the drawing of a Roberval Balance parellogram on page 556v (page 169 in my published version of Maschinen Tractate). It said that Bessler's drawing showed the Roberval Balance at an angle and therefore, it looked as though the weights were not equal. 

Stewart responded thus, '... It won't self-level, and you can move the parallelogram up and down with ease and it will remain stationary when you let go. This is not a "normal balance" and is a very interesting demonstration that should be studied and understood.'  Below is Roberval's balance drawn in 1669.

I think it worth pointing out that this system was designed to allow the weight of any thing to be checked against a known weight. The object to be weighed is placed on one of the two weigh-pans and checked against some known calibrated weights on the other pan, until balance is achieved.  The big advantage is that it doesn't matter where on either pan the object to be weighed, or the calibrated weight, is placed.

With differing weights the balance will be tilted downwards by the heavier weight, but because the weights were of a similar mass the two pans were always in equilibrium, whether tilted an angle by hand, or level with each other.  

The weigh-pans on the Roberval balance are fixed to a multi-jointed parallelogram whose two other sides are pivoted in their midpoints to a vertical post.  This parallelogram bears similarities to the figures 'C' and 'D' on the 'Toys' page, (MT138-141).  It also has a passing resemblance to the lazy-tongs shown as figure 'E' on the same page.

It seems worth pointing out that the ubiquitous letter 'A' with the sometimes bent middle arm in the Maschinen Tractate, can form a parallelogram but is also similar to the pantograph, a device for replicating a design in a larger of smaller scale.  

To me the pantograph shown below and drawn in 1867 look somewhat similar to the square and compass so often attrributed to the Freemasons, but also in the second Portrait.  

Do these various depictions have any connection with each other, or do they just bear a passing resemblance to each other?

JC

10a2c5d26e15f6g7h10ik12l3m6n14o14r5s17tu6v5w4y4-3,’.

The "Connectedness principle" revisited and "the pull-not-push" arrangement

In his Maschinen Tractate, Bessler notes that 'number 9 will not work without the application of his "connectedness principle"'. In my published version of MT I retranslated the original text as 'number 9 will not work unless my "principle of movement" is activated'.

I explained my reasoning by saying that the words ‘principis agi..t’ derived, in my opinion, from the Latin ‘ago’, ‘to drive’ or ‘put in motion’, and that this translated as ‘principle of motion or movement’, however Stewart's work on the translation has persuaded me that his translation, 'connectedness principle' is correct and it seems to fit better with the preceeding text.

I've had some more thoughts about this phrase and I think one can infer that it refers to either a connection between two objects or an interconnection between several.  I prefer the idea of two-part connections because I think he would have used some word such as interconnectedness to describe a connection between several objects. He also states that his weights worked in pairs, and that seems to fit.  But what else can we gather from the phrase?

Connectedness implies a degree of connection somewhat less than a full connection and I'm thinking of something like, for instance, a length of rope between ones-self and a heavy object. You can pull it but you can't push it, so it's a one-way connection.  My research has has shown how this is used in Bessler's wheel and he has used two similar arrangement for moving weights in both direction but only pushing them, and then he allows one hald of the pair of weights to return under its own steam and the other is brought back by the pull-not-push method.

But there is another version of the pull-not-push which gives additional advantages.  Using a lever which is articulated or hinged a point between the two ends allows one to pull another object but also to push it and, with the desired proportions, to push it with extra force over a shorter distance.  A combination of these features is used in Bessler's wheel.

JC

10a2c5d26e15f6g7h10ik12l3m6n14o14r5s17tu6v5w4y4-3,’.

A confusion of clues.

I've had some requests asking for more clues and it's not easy to point to the clues without giving too much away too soon!  I say this because I still would like to try and make my own prototype first.  However I think that unless you know the principle which drives the wheel, the clues may not be any use anyway.

  

Obviously the most useful clue would be one which would lead to an understanding of this principle, but again, I really don't want to share that yet.  On the other hand there may be people out there who do know the principle but have not yet worked out how to incorporate it within the wheel, so they might indeed find my clues useful.

It has always been clear to me that if Bessler wished to preserve and subsequently reveal his design for the benefit of post-humous recognition, or to prove he thought of the solution first, it would have to be contained within some drawings, as well as in text.  It seems to me to be almost impossible to describe the function of a machine in text alone. Sure, you can give some good clues but a picture is worth a thousand words.  So the drawings hold the best clues, but which are they?  In my opinion he would have set down those clues as soon as possible, which means the drawings in Grundlicher Bericht, Das Triumphirende and Apologia Poetica contain the original graphic clues.  I agree there are clues in Maschinen Tractate but they are not as useful as some others, apart from the 'toys' page.

As far as I know, the drawing at the end of the Apologia Poetica is only of use in telling us that there are five mechanisms in the ideal machine - and the same can be said for the MT 137, but I may be wrong about that - or my interpretation of what the fives mean may be wrong or inadequate.  I should also remind everyone that it might simply point to chapter 55 of his Apologia Poetica which obviously contains a wealth of undeciphered hidden text.

For me the portraits only hold information which points to a pentagram.  As before, I assume this refers to the number five again. I'm not convinced that Bessler would or could have included any clues which would show how his machine worked, within the portraits, however I am well aware that at least one other person has found what they regard as useful information there, so I must await the revelation of that information before I can arrive at an informed opinion.

I think it was John Worton who commented that Bessler hid in plain sight the secret of his machine in his woodcut images available for all to see for three hundred years. What better place to hide such information than within a drawing which is open to public scrutiny and has been for 300 years?

And finally I must echo Doug's words, 'some of us have been looking at simulations way too much..'

JC

10a2c5d26e15f6g7h10ik12l3m6n14o14r5s17tu6v5w4y4-3,’.

Divided Opinions

Great comments guys, on the clues and which are the best and which aren't really clues and the various interpretations of each.  I may not comment much myself, but I love reading them, so thanks and keep it up!

Ever since I became acquainted with the legend of Bessler's wheel, I have been aware that opinion is divided into those who believe Bessler's claims that he had invented a perpetual motion machine, and those who reject them utterly. The latter group is vastly larger than the former.

As time has passed I have become increasingly surprised that there aren't more people, other than we few, who have looked at the evidence and concluded that there must be something in his claims.  But of course the reason is clear, science states that such machine are impossible, and so well-entrenched in our minds is this view that nothing but the clearest evidence of their own eyes would convince those sceptics that such a machine is possible.

I know that on our side of the chasm there is a subdivision; those who believe Bessler's claims but still reject the gravity-only thesis.  This is actually an encouraging fact.  I say this because obviously the evidence which most of the world ignores has convinced some people, despite the apparent impossibility of the claims, that Bessler did not lie.  Those people seek an alternative hypothesis and some suggest the presence of an additional force which assists gravity to complete the closed circle.

It seems to me that if the evidence that Bessler' wheel really worked is strong enough to convince such people, then it should be strong enough to convince more people and maybe some within the scientific community.  Part of the problem may be that there has been no theory published which might plausibly explain how such a device could overturn the entrenched view.  I have a theory in mind and it is instantly understandable once it is described and it requires no working model to prove it.  But it is one thing to know why it is possible but another to construct something which uses that information effectively.  I'm confident that I'm right but of course only a working model will prove it.

My own construction is mostly complete, although I'm only working with one mechanism at the moment.  This is because I have to get this one right before I adjust the others.  The action is almost there but I'm not happy with its range and I shall continue to adjust it until it performs as expected.

JC

10a2c5d26e15f6g7h10ik12l3m6n14o14r5s17tu6v5w4y4-3,’.