I wonder hown practical Bessler's wheel wll turn out to be, if it ever gets re-invented. How will the world react to the news that Bessler's wheel had been replicated and proven to work?
80 per cent of electricity globally is produced by steam powered turbines - an amazingly old-fashioned concept when you think about it. These massive generators can produce 2,000,000 hp or 1,500,000 kW. They are huge beasts and I find it hard to picture what size Bessler's wheel would have to be to achieve the same output, and yet George Westinghouse was able to scale up Sir Charles Parsons' original steam turbine, which had already been increased from a 7.5 kW set up to units of 50,000 kW capacity, by some 10,000 times. I'm sure that a similar exercise could be applied to Bessler's wheel to generate enough electricity for individual consumption.
Bessler mentioned the possibility of constructing a number of wheels in series and if they were all mounted on one axle it is obvious that one could scale up a wheel of unrestricted depth, mounted on an axle of say, 50 foot, with similarly enlarged weights operating in the same way as in the original design. But is this the way it would develop? There could be a massive reduction in demand from the centrally placed power generators if there was an equally large uptake of individual designed home electricity generators.
So how much electricity does the average home consume? Hard to answer because different homes use different methods for heating and/or air conditioning but if one wanted to eliminate the need for oil and natural gas then you would require Bessler's wheel to produce more than enough electricity to power everything.
It has proved difficult to obtain a figure but I found a site which suggested that the average American house uses approximately 12,000kwh per year which is about 32 kwh a day. Of course that figure may be wildy out, but as a guide it will do. There are a number of generators currently available, producing that kind of output, some cost more than $10,000! However these do of course include the very expensive diesel engines required to rotate the armature and the replacing of that with the much simpler Bessler's wheel would reduce the price considerably. I'm sure that given the amount of competition, improvenments in design and sheer quantity of entrepreneurial manufacturers, the price would drop just as it does in the world of improving TVs and computers.
This drop in demand for centrally produced electricity could go a long way towards making the nuclear/fossil-fuelled power stations almost redundant. I guess there would still be a need for limited amounts of electricity from a central location for distribution to industrial manufactureres, and those who have not been able to take advantage of the new devices. Perhaps those larger power generators might still be able to adopt an enlarged Bessler's wheel.
I know this is just a dream, but it could happen.
JC
