Sunday 31 July 2011

Bessler's wheel must have been driven by gravity alone.

Someone posted a link on the bessler forum, in support of their view saying "all forces in closed systems are conserved. It's widely available knowledge."  The implication seemed to be that because of this fact we were all wasting our time trying to duplicate Bessler's wheel.


The first line of the link says "In physics, a conservation law states that a particular measurable property of an isolated physical system does not change as the system evolves."

You can't argue with this - it is demonstrably true. However it doesn't apply to Bessler's wheel. Isolated systems are, as the definition suggests, closed sytems without any access to external sources of energy.

But in a gravitywheel such as I maintain, Bessler's was, if you take away the gravitational force the wheel will remain stationary, therefore it cannot possibly be described as an isolated system. Gravity is external to the wheel.

So although the law of Conservation is correct the particular ramifications alluded to, do not apply in this case.

It is frequently argued that Bessler did not state in precise language that his wheel depended entirely on gravity and therefore it must have required some additional force to operate. I don't think anyone has come up with a creditable alternative force and in my opinion there isn't one - there is only gravity and there is no physical reason why it should not do.

So Bessler may have only said that - "these weights are themselves the PM device, the essential constituent parts which must of necessity continue to exercise their motive force (derived from the perpetual motion principle) indefinitely - so long as they keep away from the cemntre of gravity." - but that is as close to saying it was driven by gravity as you can get without actually saying so!

I have argued this point since I first expressed it in my book, "Perpetual Motion; An Ancient Mystery Solved?" in 1997 and I see no reason to change it.

JC

Friday 22 July 2011

Why the number 5? What does it mean?

In a recent comment, Andre reminded me of something I have become so used to that I had forgotten how extraordinary it is. He said; It's monumentally obvious that the number 5 had a very special and important meaning to Bessler. It pops up everywhere."

I think this is something that people forget or are unaware of or disregard - and yet Johann Bessler was so preoccupied with the number five that he inserted it or hid it,in every single document he published as well as many that never saw the light of day, until recently.

Everyone is familiar with the pentagram and its association with the number five, and Bessler certainly was, because it too, appears, or should I say, is hidden within, many of his drawings. Hidden it may be, but it is easily found once you are aware of his fondness for it. Space prevents me from detailing all the many coded references to the pentagram and the number 5, but you can see some of the evidence at my website http://www.theorffyreuscode.com/

So the question is; why did Bessler include so many references to the number 5?

I suggested that it was to tell us that a gravity-driven wheel, capable of driving another device, has to have five mechanisms to accomplish the task. I also considered it likely that it was intended as a pointer to the most comprehensively encoded text of all of Bessler's publications, chapter 55 of his "Poetica Apologia".

Bessler became known as 'Orffyreus' at about the same time he first exhibited his wheel, a single-direction one, in 1712. So at that time he must have already decided on a simple code, alphabetic substitution, to use as a pseudonym for Bessler, probably designed to suggest that at least he had an interest or was knowledgeable about such things. In addition he added two more forenames to his given one, which was "Elias". The names, "Johann Ernst", do not appear on his birth registration documents but a glance through my website at http://www.theorffyreuscode.com/ shows how he also introduced the same 'number five' theme into his pseudonym at or before the time he first exhibited his wheel.

It seems to me that he must have already decided to encode information about his wheel so that, at some point in future, he would be able to show that he was the original inventor, long before he was successful - and to me that is a likely scenario as I have been guilty of the same!

So does the number five relate to the wheel or the code or something else? The problem is that the number five and the pentagram have several connotations. In fact they hold so many commonly understood, subjective cultural and emotional associations, in addition to their explicit or literal meaning, that the potential for misinterpretations are boundless. Connections include,the golden section, Mary Magdalen, the planet Venus and Freemasonry, to mention just some  the morer diverse ones.

I think that Bessler found the best way to produce a gravitywheel which was suffiently powerful to be able to drive an additional piece of machinery, such as a water pump. This design required five mechanisms for reasons which I will discuss in a later blog. Five then formed the core of his subsequent code. He built a large dual direction wheel at Kassel, which required two lots of five mechanisms - one for each direction - hence the ubiquity of the two number fives i.e."5,5". What better use of "5,5" than to write his autobiography "Apologia Poetica", incorporating his code into Chapter 55 and inserting numerous pentagrams into the drawings in other documents.

How delightful to fill the ensuing book and all his drawings with veiled references to the his mysterious number 5s - and sit back and watch as others pored over the clues and tried to make sense of them!

JC

Sunday 17 July 2011

Maybe Karl described the simplicity of the concept, and not the wheel itself.

I suppose I should mention this on the Besslerwheel form but it doesn't seem to warrant a new thread; it's just my musings again.

When Karl's emissary, Nathaniel von Stapff, first approached Bessler with a view to checking out his claims, he must have made it clear to Bessler that in order to take advantage of the Landgrave's patronage, he would be required to reveal the secret, under an oath of silence of course, of the wheel's construction. Clearly this was a highly contentious issue for Bessler and yet he was persuaded to accept, the issue molified to some extent by the promise of 4000 thalers for the privilege.

So before Karl could even consider such a proposal he had to verify to his own satisfaction that Bessler's wheel actually worked, and since the Kassel wheel would not be finished for several months, and the previous, Merseberg wheel, had been destroyed, the wheel Karl saw must have been the small model mentioned two or three times elsewhere.

This small model may have been Bessler's first fully working model or even one which showed some rotation without providing enough to drive another device and it could only turn one way. It may have been the same one that was found in pieces after his death, and the same one that Jean-Pierre de Crousaz wrote somewaht sarcastically about. So when Karl described its simplicity he was probably describing the basic concept and not the interior of the Kassel wheel.

It is evident that Karl was heavily involved with matters of State and probably never took time to view the interior of the larger wheel, so one might conclude that although the concept appeared extremely simple to Karl, as he examined the model wheel - and that idea was born out by Bessler's own fears that any potential buyer might think he deserved his money back once he knew the secret, in fact the actual working model might have been considerably more complicated.

By complicated I mean that, whereas I have always maintained that Bessler indicated that five mechanisms were necessary to a fully functioning wheel, there might have been as few as two in his model version - a very simple concept and an ideal method of constructing a proof of principle version.

JC

Monday 11 July 2011

Principle of connectedness, and is five necessary?

Interpreting Bessler's principle of connectedness is a bit like knitting smoke. You can see it but you can't seem to grasp it. I thought I'd got it before, but now I think I really have! But have I? I think so but who knows at this point.

You can read the words 'principle of connectedness' and surmise that it refers to a degree of connection. Is it a vaccilating connection, sometimes fast and sometimes loose? Is it a flexible connection only capable of connection in one direction? Might be. There are several possibilities, but I think I understand what he was referring to now and if I'm right it doesn't in fact refer to the way the actual connections are made, in my opinion refer it refers to something else. I once thought I had found a feature of gravitywheels which no-one else was aware of. Then I met a guy who had come from Australia and had dropped into meet me and we discovered we were both aware of this oddity. I have seen comments which come close to what I'm thinking of but no one seems to have accurately described it. Of course it might not be as mysterious as I'm thinking, but I'm going to write something on the subject and post if for comment.

The other thing that concerns me - am I right in thinking that Bessler was indicating five mechanisms? I still think so, but testing five mechanisms on a wheel takes so much longer because I have to build each of them and attach them, whereas if I just wanted to test the hypothesis with two it would be so much quicker. But Bessler said "If I arrange to have just one cross-bar in the machine it revolves very slowly...", so will my two produce enough mechanical advantage to at least provide proof of the principle? Another rhetorical question for which the answer must be, try it and see.

JC

Tuesday 5 July 2011

When Bessler's wheel is reconstructed it will match his design exactly.

Recently, a blog or so back, I mentioned that I had found additional confirmation that my design was correct, in one of Bessler's clues. This led me to consider my other interpreted codes and I found further examples which consolidated my view that I was on the right track. Ruminating on this while on holiday I was struck by the curious lack of interest in Bessler's codes, and I realised that as far as I can tell, there are few who support my work on this subject.

I know that the interpretation of these kinds of codes is highly subjective and prone to being influenced by personal prejudices. In other words, I may appear to be guilty of interpreting the facts to fit the theory, or finding what I'm looking for by ignoring equally valid alternatives. Where I have thought that this was possible in some of the interpretations I have posted at http://www.theorffyreuscode.com/, I have admitted that this might be the case, and have said that the results are more speculative. In other cases I have had no doubts and have said so too.

In which case I am surprised to see comments from time to time, on the besslerwheel forum posing possible solutions to apparent codes for which I have already offered my own interpretations and which I am satisfied are correct. Of course they may simply disagree with my views, but sometimes it seems as though other people are unaware of my work in this area and perhaps I should be doing more to broadcast it. Those who follow my progress (or lack of it!) in reconstructing Bessler's wheel might think that I should get on with finishing it, rather than encouraging people to read my decoding efforts just in case they get there first. But I am trying to cover all outcomes including one where I am stuck, or unable to finish the wheel for some reason beyond my control.

I have another website at http://www.orffyreus.net/, where I have published everything I have found which may lead to the decoding of Chapter 55 in Bessler's 'Apologia Poetica'. It seems to me that my descriptions of my work in deciphering that extraordinary document are certainly a step towards full decipherment, yet no one has commented on it and as far as I know, no work is being done on it.

The methodology needed to recognise and decipher these numerous clues is straight forward. It should be obvious by now that I have deciphered far more than the limited amount I have revealed on my websites so I can say with a considerable degree of confidence that what is there is genuine, unless I have said that it is speculative. When I have more up-to-date information that requires additions or amendments to what is there I have added it.

I am writing a long document detailing the additional information concerning both the concept and the design revealed in Bessler's clues, and it will be published once I have succeeded in reconstructing Bessler's wheel. This will prove to those who say that we shall never know whether any new design is in any way similar to Bessler's, that they are wrong and that my design configuration is exactly the same as Bessler's.  I am confident that the design will match Bessler's because of the information I already have. 

JC

Sunday 3 July 2011

A simple design and a parallell course?

I returned from Spain and found that there were 450 postings on Besslerwheel forum in my short absence! But here's a confession; I am so convinced that I know exactly how Bessler's wheel worked that I have kind of lost interest in other people's theories, and I couldn't face the prospect of going through all 450 postings, so I just looked at the subjects that seemed most attractive to me. I may have missed some interesting comments but it is my impression that most of the ideas which surface there have been discussed previously and more than once.

I suppose this sounds egotistical, but its just a subjective feeling and if I think I'm right then I guess I'm going to think that way. I shall continue to read most of the posts and be interested in any that appear to be closing in on my own ideas, and I'm not so conceited as to think that no one else is working on a parallel course to my own.

Now I'm back I need to concentrate on finishing my proof of principle wheel. It's not as simple as Karl seemed to think, not to build any way, although I'm sure the equivalent of a carpenter's boy today, could make it if he was allowed to study the design for a few minutes. If you can see a finished mechanical system laid bare so all its parts are visible, then I'm sure that in most cases it is easy to understand how it works, but devising the best mechanical arrangement with nothing more than the basic concept to guide you is not so easy. Where in the length of a lever is the best point to attach a pivot? How wide should the angle be that a lever moves through to gain the most mechanical advantgage? Is there a point at which the advantage gained is cancelled out by other reactions? But if all this has been worked out correctly and results in a working model, then to an observer studying the movement, it might indeed look simple and easy to copy.

I have no fear that anyone will gain any insight into my design from the above rhetorical questions, although they apply to my design I don't think that anyone will just stumble on the correct configuration from those few words - unless of course they are on that parallell course!

JC

Wednesday 22 June 2011

Leave no stone unturned - or the wheel will remain unturned!

It is a strange affliction that drives us to seek the solution to a device which science tells us is impossible. This obsession has driven me to visit places I would never have otherwise gone to; visiting museums, libraries, archives of ancient books, historic sites, demonstrations of ancient machinery, and communicating with as diverse a bunch of people as it hard to imagine. I've given lectures on Bessler at a crop-circle convention, inspected ruined windmills of many kinds, attended an opera based on the life of Bessler, met people from all walks of life and from different countries, done several radio interviews, the most bizarr being one for the palace of the paranormal! I've assisted in an attempt to remotely view Bessler's wheel, allowed someone to try psychometry on a book handled by Bessler, dowsed for his hidden grave and been invited to a spiritualist church in case he had a message for me - he hadn't!

My obsession (I don't think anyone could call it just an 'interest'!) has led me down paths I doubt I would have been interested in or even become aware of without the need to find the key that unlocked the secret - the Jesuits, the Masons, the Pythagorians, the Jewish Kabbalah, Bible codes, alphanumerics, Trithemius' codes, etc etc. This journey led me to the discovery of Bessler's codes and the interpretation of many of them. I was aware that I had discovered some for which I was unable to find the key; I was also aware that I was doubtful about my own interpretations in a small number of cases, but there was one in particular that I was convinced that I had extracted everything there was to find in it.

But....I was reviewing my latest construction and comparing it with my conceptual drawing based on the coded information I had found and I had one of those too rare flashes of inspiration. I was considering an alternative interpretation because of a single tiny apparent superfluity which had bugged me for a long time and for which I had made up interpretations to explain away. As someone on Besslerwheel forum said, manipulating the facts to fit my theory instead of the other way around. So why was this extra little bit there? Once I had asked myself this question, looking at my drawing at the same time, it suddenly became clear why the extra bit was there and it was at that moment that I realised that Bessler had alluded to it several times and I had missed it.

So my wheel is complete, only it doesn't work. The reason being that everything is there except for the inclusion of the connectedness principle which I thought I understood, only I didn't get the whole picture! It is so easy to fool yourself that you think you understand something and yet there is always an element of doubt without the vital unambiguous instructions to inform you. I slipped up, but now I understand what should have been obvious to me some time ago, as it has been in front of my eyes for several years and since I have been posting my discoveries on my web sites, also in front of everyone else's.

So, I can do no more for now because I'm off to sunny Spain,. More when I get back.

JC

Sunday 19 June 2011

Wheel update

I completed the 'improved' version of my wheel and I thought I'd got it, as it began spinning of its own accord . It completed five turns before stopping and reversing a little. I found one of the mechanisms had 'overshot ' its stop and become locked. I freed it and repeated the experiment and it turned the five or six turns before it locked again. My design concept seems ok but delivery is not so hot. I'm redesigning the way the mechanisms work. They will accomplish the same end in the same way but the rotation of the mechanism allows to much lateral sway and the stops don't always capture the moving levers and stop them.

I know you haven't the faintest idea what I'm talking about but I thought I'd let you know that it still doesn't work, but I'm on the case and confidence remains high!

I've lost count of the number of times my workmanship has proved not up to the task required, but this time I took my time in assembling the parts, but sometimes less haste is difficult to maintain and I admit I rushed the final assembly and to my chagrin, the quality has been less than adequate.  Karl's comment on the simplicity of the design may give the impression that it was easy for a carpenter's boy to make, but it does not preclude the possibility of a ham-fisted mental genius cocking it up, not that I am that either - a mental genius.

If all else fails I will, in the end either publish my design or probably get help in making it, but I haven't reached that stage yet.

JC

Sunday 12 June 2011

Musings on Gravity

Trevor's comments about Besslers' wheel being a closed system got me thinking (thank you Trevor). I have posted an article at http://www.gravitywheel.com/ entitled, "Musings on Gravity". Any comments welcomed.

JC

Friday 10 June 2011

Wheel update and Karl's comment

I'm working on the wheel again and I think (I hope) I know what was wrong with the last design and I'm reconfiguring the mechanism accordingly. I've found a way of making the correct weight rise upwards very quickly, at the right moment. This is something that is crucial in my design and also something that Bessler commented on.

There are other aspects to this design which have to be taken into account when arranging the actual range and position of the parts and this is something that Karl would have seen but almost certainly not recognised for its importance. Hence his comment that it was very simple. I have taken on board my own comments about sphexishness and tried not to make any assumptions in designing the new mechanical arrangenment, with the result that I have discovered that there is a variable which I had not appreciated before. I don't want to talk about it yet, but I will bring it up on the forum at a later date to get some feedback.

Finally to answer a couple of questions emailed to me, this rearrangement or reconfiguration of the mechanics does not mean I have abandoned the concept I have been working on, quite the opposite. The original concept is valid and unarguably the same as Bessler's, but there are variations possible within the design which improve the way it works and that is what I'm engaged on at the moment.

Regarding Karl's view of the machine's simplicity, I think someone commented similarly to my own view on the besslerwheel forum, that perhaps he had not appreciated how complex the design had to be; not complex in appearance, but requiring some very specific arrangement of the mechanism.  This I believe I know from my own work on this design and from the helpful hints given by Bessler.

I gave a small clue recently with my comment about opening windows.

JC

Friday 3 June 2011

Wheel progress update

Doug made the point that 'A lot of scientific discoveries have been made by accident and even more thru trial and error. Did Bessler design a genuine perpetually turning wheel by trial and error, by accident, or by a dream in the night? Or did he realize the sphexishness of his efforts? Did he then design wheels that would convince everyone they were genuine, even though they weren't genuine?'

It's true that trial and error have played a part in scientific discoveries, but I think Bessler told the truth about his dream giving him the information he needed. I have had those kind of dreams as have others working in this field. But discovering the concept which may lead to the solution is usually followed by a bout of trial and error and might even involve sphexishness!

My own current construction has proven stubbornly stationary. Yesterday I finished the latest prototype and it failed miserably. However I know why and also what to do about it, so I won't be revealing anything just yet. The problem can best be explained by considering a horizontally opening window.

Imagine that it is wide open at 90 degrees from the closed position. The hardest effort to close it is at the start and then it become progressively easier to close . The same thing is happening to my mechanisms. They are slow to begin the move and then they slam into position, but too late. The solution appears to be to reduce their range of movement. It would be like only opening the window half way, to 45 degrees. Easier to close then.

This causes another problem which I also know how to solve - the range of movement of the main weight is reduced to the point of ineffectiveness. I must therefore increase the range of what I call the initiator, so that is what I shall be working on. Bessler described the weight as flying upwards and that is vital in my own design as it has to start and complete its range of movement within a fifth of a turn of the wheel itself, as there are five mechanisms.

I don't feel disheartened by this latest failure, as the end appears to be in sight.
JC

Wednesday 1 June 2011

Sphexishness in Perpetual Motionists?

I'm indebted to Murilo, a regular on the besslerwheel forum, for the following link to an article about'sphexishness'.

It got me thinking. If, in response to a familar trigger situation, we follow an internal rule or command, maybe ignoring alternative paths to follow, is this an example of 'sphexishness', if it is then I would argue that we are all, to a small degree, infected with this same set of internal rules.

From the above link, briefly, "scientists have coined a word for a certain type of behaviour named "sphexishness", after the female digger wasp, the 'sphex'. She will sting and paralyze a cricket, stash it in a hole in a tree and lay her eggs on it. When the eggs hatch, the baby wasps have fresh cricket to eat. But sphex also has an internal rule. When she brings a cricket to the opening of the hole, she always goes inside for a look around before she drags it in. If the cricket is moved a few inches away while the sphex is in the hole, she will repeat the process, bringing the cricket back to the opening and going inside for a look. As often as the cricket is moved, the wasp will repeat the behavior. Her internal rule calls for her to look in the hole before she drags the cricket inside, and that is what she will do, ad infinitum, every time the cricket is moved."

It's fun to observe sphexishness in animals. I used to have a labrador dog and it amused me that she always turned around a couple of times before settling in her basket. I was told that this was an instinctive action inherited from her forebears, related to trampling down grass to make a bed. This was an internal rule unconnected with her present circumstances but impossible for her to ignore. Even when she grew old and arthritic and barely able to walk she still managed a turn or two before collapsing into her basket. Instinctive behaviour - or inherited? What's the difference?

"The trick, of course, is to be able to recognize it in ourselves. What behaviors do we humans senselessly repeat over and over because of some unquestioned internal rule? What entirely avoidable loop of stupidity are we stuck in?"

True, we seekers of new ways of producing energy do try to envisage new approaches to the problem at each step along the path to the solution, and yet how many of us, on our individual paths, make assumptions commanded thus by some unquestioned internal rule. This rule could be based on some learned behaviour or 'fact' instilled in us from our earliest experiences - or an inherited instinct. But it's not necessarily one rule, whatever that may be, it's the trait of sphexishmess which lies behind our thought processes. To paraphrase a question from the article, What behaviors do we perpetual motionists repeat over and over because of some unquestioned internal rule? What entirely avoidable loop of stupidity are we stuck in?

We have been told that the secret of Bessler's wheel was simple, right? Right! And we know in our hearts that we cannot realistically expect to discover a new unknown law of physics which will allow Bessler's wheel to operate - well I don't anyway! And lastly we, at least, know that Bessler's wheel did actually work. So if we haven't discovered the secret of such a simple device which complies with the physical laws as we understand them - we must be being steered by sphexishness and being guided (misguided?) by some internal rule. We often use phrases such as, "think outside the box", apply lateral thinking", but these concepts still don't allow us to recognise and ignore certain rules inherent within our makeup. How do we circumvent these cast iron cognitive processes?

I think we have to take each step as if we were ignorant of the outcome of every possible configuration of mechanical parts. We must not assume anything, so all bets are off - the situation has drastically changed. Any guarantees, implications, or assumptions regarding its outcome no longer apply.(Thanks to http://www.urbandictionary.com/)

Then maybe we will find what Bessler found. In the mean time I continue to struggle to find the time to complete my own version of Bessler's wheel. If I'm right then the other method described in this blog, (also known as trial and error) will not be necessary as I think that Bessler did leave enough information behind him to build his wheel. But it's not so easy as just copying what you see in his drawings, but the clues are there.

JC

Friday 27 May 2011

Wheel update - cylindrical weights for me!

Yesterday was my granddaughter Amy's eighteenth birthday so there was no wheeling done then, and on Monday we are holding a big get together for the whole extended family so I shall have to hide my work from prying eyes! There are some members of my family (not many!) who think I might be on to something and they always come to see how I'm progressing. But on Monday they'll be nothing for them to see.

The weights I've used for the last few years are not suitable for the current construction so I've bought some new fishing weights, made from non-toxic lead. They are ideal as they are round discs.

The problem has been that the former weights were cut from a length of solid steel squared rod, so were rectangular in shape. I drilled a hole through the middle of each one, but slightly off-set and this has worked fine until now! The part of the mechanism to which they attach needs to be able to move freely, but the weights always try to hang downwards which is fine for some positions.In the current design, during rotation the weights continue to try to hang downwards and this causes them to interfere with the mechanism. I can't fix the weights without fixing the mechanism. The answer is simple. I need to use round or cylindrical weights, that can turn without affecting the mechanisms and remain balanced. Cylindrical weights! Sounds familiar.

I know I could use heavy flat washers but they too have problems. The only ones I can find have holes in the middle which are too large. But fisherman's weights are perfect. I only had to drill a hole in the middle to attach them and they are really heavy.

I am using ten weights and I can imagine that with the Kassel wheel containing two systems, one the reverse of the other, Bessler would have used twenty weights, and at 4 pounds a weight that comes to 80 pounds plus of course the weight of the wooden wheel.  This is just my opinion and not to be taken as factual, although I'm convinced!

JC

Wednesday 25 May 2011

"The clues are there." as David Frost used to say.

Some readers are getting impatient for results but unfortunately other aspects of life have a way interfering with our best intentions. I continue to work on finishing the wheel as and when I can but as I've said before, I sometimes get a few minutes and that is all. My mother-in-law was in hospital but is now in a respite home for a few weeks. We visit her daily for a hour or so, but it is a 40 minute drive each way and we therefore lose a big chunk of each afternoon from our free time. So - time is tight..

What I can say is that the clues continue to support my view that I am on the right track and I will repeat that the best place for getting confirmatory information is the 'Toys' page - MT.138-139-140-141. The problem with this page is that unless you have already arrived at the right design, the page is almost meaningless. What the drawings on that page do, is help to refine the final design. That is what I'm engaged in when I can get the time.

Every drawing on that page supplies information, but they do not represent actual physical designs. As an example I can point out the slightly longer uprights on 'D' compared with 'C' - this is important information and without it would cause a problem which is only discernable if the right design is in front of you. Having said, that I worked out the solution to the problem when I saw it but it was good to have the confirmation that it was why Bessler had drawn the figures in that way and it was deliberate and not an incidental variation.
 
JC

Monday 16 May 2011

Bessler's wheel worked by simple mechanics - no fancy physics required.

Now that I know how Bessler's wheel worked it has become a source of some concern to me to see so many people trying promote their own theories about how it worked. There are as many pet theories out there as there are people, I think, and each is as certain as I am that we are right.

Most people agree that it cannot violate any known laws of physics, therefore we must have erred in some way or perhaps be missing some crucial detail about the way gravity works. Perhaps, others have speculated, we need to involve a second natural force such as CF, or ambient temperature variation or some other such extra piece of energy to help our wheel complete just one rotation. In fact it could not be more simple. There is indeed no need to call for some new kind of physical law or even a new interpretation of the existing laws, because Bessler's wheel worked quite readily, getting its energy from the force of gravity (via falling weights Trevor ;-)) with nothing more than the same understanding that we have all been taught. Karl understood that and that is why he was surprised that no one had discovered the solution before.

I know that we have all touched upon the solution and have moved onwards without considering how we might overcome any obstacles that appear to be insurmountable, and that in my opinion, is why Bessler succeed.  Having ruled out all other possibilities he returned to basics.
JC

Friday 6 May 2011

Websites being revised to include new information about Bessler's wheel.

I've temporarily removed everything from my websites at www.besslerswheel.com and www.gravitywheel.com -t hey will be updated and republished as soon as possible, but I am completely rewriting them as I have made some significant progress in my research into how Bessler's wheel worked and how it was constructed. Some of the content on the websites needs to be cahnged. This does not mean that everything on the websites was wrong, but there has been some over-complication of the principle, which seems now to be very simple. In fact I cannot understand why I ignored it for most of my life.

The truth is that I think we have all been on the right track at some stage but have not had the advantage I have recently had of being able to study Bessler's clues to the point where I now understand all of them including a lot that I don't think anyone else has noticed, (although I may be wrong about that, as I have no idea what others know or are working on!)

It has become clear to me as I have been building my latest construction, just how many clues there are which are overlooked simply because there are so many of them and they are therefore not suspected of being clues. It is also becoming increasingly obvious that Bessler's claim that 'no one else could have succeeded because no one else took so much trouble to try every possible variation', was nothing more than the simple plain unvarnished truth! As my latest construction progresses I notice small details in his papers which guide me and also cause me to make some corrections to what I'm doing, and to be honest without those clues I wouldn't have chance of succeeding. I probably won't anyway, but I like to think I will!

One detail I was working on, the design of which is revealed by Bessler, seemed to me to be wrong as it appeared to be counter-intuitive, but I thought I'd try it anyway as things weren't working out, and it turned out to be the solution to my problem. This has proved something to me - if and when a gravitywheel is succesfully made and is working, some people have questioned whether we will ever know if will be the same design as Bessler's - my answer is that if mine works I shall know and can prove that it is identical to Bessler's, apart perhaps from some possible minor variations in the sizes of the parts.

As I have now said several times, I shall publish all of this information whether the wheel works or not. I can do this because I know that the clues I've understood are real and apply to the wheel but it is also possible that I have neglected some detail that prevents success. Maybe someone else can complete the task, but first I want to have an attempt at a successful PoP.
JC

Friday 22 April 2011

My Final POP Prototype? ... Again!

I'm just coming to the end of the construction of my latest design for Bessler's wheel. I've maintained my belief in the same concept which makes his wheel possible for some considerable time as, for me, it is the only explanation for his success. The number of ways one can achieve this is limited but does not rule out severl variations, each of which is designed to move a weight a sufficiently large distance, quickly.

I have always born in mind his comment about the importance of incorporating his 'connectedness principle' within the design and although I had an idea what this might refer to, it wasn't until I saw the first completed mechanism on my new wheel, working, that I realised why he referred to it in this way.

As I was carefully assembling the pieces that made up the mechanism I was musing on the problem I might have in describing my interpretation of his 'connectedness principle' and I realised that it was a very good description, if you had to do it in two words, one of which was 'principle'. 'Connectedness' may seem like a made-up word but it is perfect for this situation.

I hope to more or less finish this version in a day or so, working around visiting familes, because it's Easter, but there will be some minor adjustments to make before it is completely finished. I know this because the connectedness principle requires some adjustments, the precise amounts of which, won't become obvious until the wheel's mechanisms are finished and fitted and shown to be working properly.

I'll let you know what happens, but even if it should fail to rotate I am convinced that I am on the right lines - the only lines to success.

JC

Friday 15 April 2011

www.theorffyreuscode.com updated again

I have updated www.theorffyreuscode.com again. It occurs to me that perhaps not many people understand why I have continued to search for clues among Bessler's works when I should be trying to build working model of the wheel. The truth is I do both.

Even as I construct a new design, I continue to ponder on Bessler's clues. I cannot ignore the strong hints that Bessler left regarding clues to the wheel's workings. He left textual clues which were designed to both intrigue and mystify. He left pictorial clues which achieved the same result and if all he wanted was to mystify, then it might appear to be a hopeless task to try to make sense of what he left.

But I'm convinced that he wanted us to learn his secret. Consider this. He demonstrated his wheel over a period of at least eleven years during which time it was thoroughly examined by a host of people intent on proving him a fraud - and no one ever found reason to disbelieve his claims. He allowed one person to observe the inside, who was known as a man of utter integrity, who said the claims were real. Even after he left this man's patronage Bessler designed a variety of machines some of which were based on his wheel. He never ever gave up, and maintained his innocence of any suggestion of fraud, 'til his death.

Given the above one must assume that he was telling the truth. It seems to me to be absurd to give up trying decipher his clues when he made it so clear that he wanted posthumous fame as the inventor, if he couldn't have it while he lived. To achieve fame after he'd gone he attempted to ensure that sufficient clues were left beind to help someone to replicate the wheel. The clues had to be obscure or someone might have deciphered everything while he lived, so it was never going to be easy.

Consequently he flooded his published works with clues of an intriguing nature, which by themselves, were of little help in actually building his wheel. He did everything in his power to make people understand that the solution was there if they looked. But so far few people other than myself have researched the possibility that the answer lies encoded within his publications.

My self-imposed task has been to underline any and all clues that I find, but so far they are merely eye-catchers which interest and intrigue us but don't provide the answer. But they were designed to lead to that answer and that is why I list every piece of code I find, with my interpretation of the meaning behind each. That is what my web site at http://www.theorffyreuscode.com/ is for.

There is no doubt that we are in desperate straits searching for a new form of energy, if there is a half a chance that Bessler's wheel will answer, than we should be doing all in our power to solve it, replicate it and use it.

JC

Saturday 9 April 2011

Will Bessler's wheel be a practical solution, if it works?

I wonder hown practical Bessler's wheel wll turn out to be, if it ever gets re-invented. How will the world react to the news that Bessler's wheel had been replicated and proven to work?

80 per cent of electricity globally is produced by steam powered turbines - an amazingly old-fashioned concept when you think about it. These massive generators can produce 2,000,000 hp or 1,500,000 kW. They are huge beasts and I find it hard to picture what size Bessler's wheel would have to be to achieve the same output, and yet George Westinghouse was able to scale up Sir Charles Parsons' original steam turbine, which had already been increased from a 7.5 kW set up to units of 50,000 kW capacity, by some 10,000 times. I'm sure that a similar exercise could be applied to Bessler's wheel to generate enough electricity for individual consumption.

Bessler mentioned the possibility of constructing a number of wheels in series and if they were all mounted on one axle it is obvious that one could scale up a wheel of unrestricted depth, mounted on an axle of say, 50 foot, with similarly enlarged weights operating in the same way as in the original design. But is this the way it would develop? There could be a massive reduction in demand from the centrally placed power generators if there was an equally large uptake of individual designed home electricity generators.

So how much electricity does the average home consume? Hard to answer because different homes use different methods for heating and/or air conditioning but if one wanted to eliminate the need for oil and natural gas then you would require Bessler's wheel to produce more than enough electricity to power everything.

It has proved difficult to obtain a figure but I found a site which suggested that the average American house uses approximately 12,000kwh per year which is about 32 kwh a day. Of course that figure may be wildy out, but as a guide it will do. There are a number of generators currently available, producing that kind of output, some cost more than $10,000! However these do of course include the very expensive diesel engines required to rotate the armature and the replacing of that with the much simpler Bessler's wheel would reduce the price considerably. I'm sure that given the amount of competition, improvenments in design and sheer quantity of entrepreneurial manufacturers, the price would drop just as it does in the world of improving TVs and computers.

This drop in demand for centrally produced electricity could go a long way towards making the nuclear/fossil-fuelled power stations almost redundant. I guess there would still be a need for limited amounts of electricity from a central location for distribution to industrial manufactureres, and those who have not been able to take advantage of the new devices. Perhaps those larger power generators might still be able to adopt an enlarged Bessler's wheel.

I know this is just a dream, but it could happen.

JC

Thursday 31 March 2011

"No" to more nuclear power. Free, clean, safe energy = Bessler's gravitywheel

The news that the Tokyo Electric Power Company will completely write off four of the six reactors at the crippled nuclear plant, suggests that the time is up for this expensive, potentially hazardous way of generating electricity. Many countries are reviewing their plans to build more 'improved' reactors and perhaps a halt will be called to further developments. I suggest that coal-fired electricity generators would be preferable to the nuclear option. I looked up the comparative costs of the options in the UK and found that one nuclear power station costs about £1.2b to build. A coal-fired one costs a little less at £1 billion. However the coal-fired one has the latest emmission cleaning technolog that reduces pollution to almost zero. The on-going cost of dealing with spent fuel rods from a nuclear reactor are almost limitless.

By comparison, an offshore wind turbine is rated at 3MW but only reaches about 40% of that capacity because of wind conditions. This means that you would need 1166 wind turbines to equal the output of a nuclear reactor! The cost of building them is estimated at £10.4b and would take up 406 square kilometers!

Why are we even considering wind power? It doesn't make economical nor ecological sense. Better to have coal fired power than the other options. However there is a snag. The cost in lives of coal mining is prohibitive and it is impossible to guarantee absolute safety even in the most advanced pits. So what's left?

What's the solution? There is one of course! Above these options Bessler's wheel would rein supreme as the
cleanest,cheapest, safest option.

Am I being presumptive and too naive in suggesting that such a system is even feasible let alone possible? No, the evidence that such a device was designed and built and demonstrated almost 300 years ago in Germany is so well established that it is regarded as a potential solution to the energy crisis in some quarters and is accepted as fact among a few in the higher echelons of the world of physics. We can, and must, continue our investigations into this phenomenon in order to present the world with this c lean, free, safe form of energy.

We have been taught that such a device, driven purely by gravity, is a violation of the laws of conservation of energy. Unfortunately there is an absolutely vast majority who continue to believe this and ignore the evidence. There is sound evidence that Bessler's wheel required no other force than gravity to drive it. What I find extraordinary is the lengths many of those who accept that Bessler's wheel worked, will go to, to explain why it works, summoning additional energies that in my opinion simply won't suffice. For me the truth is blindingly simple, gravity will do the job on its own and there is no conflict with the laws of physics. There is no need to imagine extra impetus from other forces, gravity will do the job. Bessler's wheel proves our teachers wrong and if it is wrong then it is up to we few who know the secret to build a working model, publish the how and the why and spread the information with all possible speed to stop any more of these toxic nuclear generators bringing forward the early demise of the human species not to mention the myriad other forms of life. It could happen.

JC

Johann Bessler, aka Orffyreus, and his Perpetual Motion Machine

Some fifty years ago, after I had established (to my satisfaction at least) that Bessler’s claim to have invented a perpetual motion machine...