Future Plan update.

Following the demise of my plan to share all that I have found out about the design of Bessler’s wheel, I have decided a two pronged approach is the way to go.  I am proceeding with my original plan which has always been to build it and publish the results or, should it fail, publish the design anyway.  It might lead to success by someone else, because I know that I have discovered 90% of it, if not the whole thing.  At the same time I will draw up a detailed plan of how the wheel works according to me, and publish it when it's ready!

It might be thought that I could produce and publish such a drawing quite quickly, but I’m not the fastest nor the finest draughts-man on the planet, by any means, and I want it to be clear and understandable.  I may decide to save each part of the graphic build and then run it as a simulation of the build process.  I can’t do an actual simulation but I know there are many people out there who can.

I’m sorry that the sharing of the design and how I found each clue of Bessler’s which led me onward, has foundered on the rocks - but my plan involved some 50 posts and it wasn’t until I had posted about three times that the emails and PMs began to come in and I realised that I had set myself up for an impossible task of responding to each one, sometimes repeating myself several times, and with a growing number of them coming to me.  An excellent response and I’m not complaining, but it proved to be a cumbersome thing to deal with and in the end not necessary.

So once the design is out there, then I can write about the clues and hopefully show that Bessler did intend to leave that information to us for our benefit - and it would show that our design was exactly the same as his, which would answer those who say that we can never know whether our designs are the same as his.

JC

Johann Bessler’s Drawings Hold the Key

It has always seemed to me that the drawings in Das Triumphirende were really rather uninteresting and repetitive.  But I took note of his comments about studying Apologia Poetica, and also at the front of his Maschinen Tractate his suggestion that studying more than one drawing might lead someone to the correct design and thus the solution.  This appeared to refer to the drawings in MT, and perhaps they did, but I wondered if they might also hint at other drawings elsewhere.

If Bessler was serious about leaving the information on how to build his perpetual motion machine to posterity, I never believed mere words would suffice, there had to be that information in one or more drawings.  The hints Bessler left in AP were made many years before the MT had been started so the advice, although added later due to the arrest, is more likely to have referred to those earlier drawings.  I noted several apparent errors in the two drawings of the Merseberg wheel and subsequently found the pentagram which is unarguably present - and the clock which is also self-evidently a deliberate addition.

I explained the clock previously, how it points to the number 55 - 12 x 55 = 660, that being the total of all the numbers labelling the parts, (even after taking into consideration that the number 24 was changed to 42) in both Merseberg drawings. So to cut a long story short I discovered over a very long time what I believe to be Bessler’s  design.

I know that people are impatient to know what I think I’ve discovered or if it is worth anything and I understand that.  I will post everything, but if I just post the design I won’t have shown how and why I arrived at it, and it will look like mere speculation whereas if I can ‘prove’ that each point is derived from a clue within the drawing it might give people more confidence that I’m right.

So the four drawings in Das Triumphirende contain just about all the information you need to build Bessler’s wheel.  The Toys page helps to confirm some details and there are numerous clues all over the place pointing to - dare I say it?  - the numbers 5 and 55.  So today a brief suggestion about that number!

Below is a simple drawing illustrating why five mechanisms are needed.  That is all the room there is.  I’m not saying that it has to be five but I’m sure it is the minimum number.  Alternatives are 7 and 9.  The reason for using odd numbers will become clear in subsequent posts, it is simply a result of the design used and it might be possible using an alternative method to have even numbers of mechanisms.

There is much more to add to the above drawing (using up to about 50 posts!) and it is simply to show why there are five mechanisms in this particular version.

JC

The “great craftsman phrase” interpreted.

What follows is my interpretation of the “great craftsman phrase”.  In his Apologia Poetica, Bessler included many clues, some encoded and some merely ambiguously phrased so that getting the true meaning from each was a struggle.  The one I discuss here is one of the most puzzling, however in the following explanation I hope that the meaning becomes clear.

He wrote, “a great craftsman would be he who, as one pound falls a quarter, causes four pounds to shoot upwards four quarters.”  This curious phrase seems on the face of it to be nonsense and yet by picking it apart one can get at the meaning.   What Bessler sought to do was to tell us what to do but disguise it from the casual reader; however it has turned out more difficult than perhaps he anticipated.

Note that within the quote he mentions that there are five weights, one plus four, and each one is equal to one pound.  Secondly, one pound falls a quarter.  How do we define what he meant by a quarter? In this case he was referring to a clock - something he also included in the first drawings in both Grundlicher Bericht and Das Triumphirende - and a quarter of an hour or fifteen minutes covers 90 degrees.  But how could this single right angle fall cause “ four pounds to shoot upwards four quarters”? 

There has been so much discussion about what this brief phrase means, and much puzzlement – and yet once you know what it really means, it is very simple.  We saw in the first part that the word ‘quarter', referred to, not just 90 degrees but also to a clock.  In the second part the word ‘quarter' also refers to a clock but this time he has confused us by using the words ‘four quarters’. ‘Four quarter’s equals ‘one whole hour’.  Each hour on a clock is divided into 30 degrees, so the words ‘four quarters’ meaning ‘one hour’ as used here equals thirty degrees.  To paraphrase Bessler’s words, “a great craftsman would be he who, as one pound falls 90 degrees, causes each of the other four pounds to shoot upwards 30 degrees.”  

You might think that that is unremarkable and wouldn't achieve the result we seek, but as with all Bessler information you have to work at it and I have more information to share on this phrase, but at this point I will just say that it is not necessary for the weight being lifted to rise as far as it fell at this point in rotation.

You might also think it would have been better to have said that “one pound falls 90 degrees, causes one pound to shoot upwards 30 degrees”, but that would have removed the information that five weights, and therefore five mechanisms were involved, so it had to be four weights plus the one.  Also do not assume that I am saying that there were only five weights involved, there are more, another five for each of the scissor mechanisms.

This removes the problem of lifting four weights, or just one weight, higher than the same weight falls.

JC

Johann Bessler's so-called Cross-Bars

Each of these code-sharing posts will be simultaneously posted on the www.besslerwheel.com forum as well as here on my blog, so that I have my own record of the posts in this subject.

Each post will contain information I have found in Bessler's books which will hopefully help towards designing the actual mechanisms, and should convince those who believe that Bessler left no information about the actual mechanisms within his wheels, that in fact everything we need can be found if you know where and how to look.

Much has been written about Johann Bessler’s puzzling comment about his use of  cross-bars and I think it’s time I shared what I believe to be the truth about them.

In his Apologia Poetica, on page 71 of part two, he wrote, “If I arrange to have just one cross-bar in the machine, it revolves very slowly, just as if it can hardly turn itself, but on the contrary, when I arrange several cross-bars, pulleys and weights, the machine can revolve much faster, and throw Wagner’s calculations clean out of the window!”

That’s how it appeared in the English translation at the back of my publication of Bessler’s Apologia Poetica.  But a couple of years ago I decided to go back to basics and looked up the word creuze which appears twice in the above quote in the original German.  The word creuze was translated as cross-bar because it was one of dozens of alternative meanings in a huge German/English dictionary I owned, and seemed to be the best fit with Bessler’s description of his mechanism.

But I could not understand how it might be possible to design the wheel with just one cross-bar and it was then that I resolved to check out the whole translation myself.  The word creuze has one obvious equivalent in English and is the basic meaning in German, and it is cross.  There is one obvious place in Bessler’s entire output of mechanical drawings which can be described as a cross and it is in the scissor mechanisms.

The scissor mechanisms is an essential ingredient in the design of the wheel, according to Bessler.  It is obvious when you look at the picture below that the red parts are indeed crosses and in my opinion Bessler is suggesting that one linkage, or cross was scarcely sufficient to turn the wheel but more of them made the wheel turn faster.

The inclusion of the words weights and pulleys along with crosses, suggests that the three items are connected in some way, one of them being the scissor mechanisms.  This solves the puzzle of having “just one cross-bar”, because you could have several crosses on each mechanism.

In a subsequent post I'll show that there were only two X's required, although you can see 8 in the above picture which is from the Toys page in MT, if you include the two handles.  This suggests that more will be better?

You can see from the above single scissor mechanism that one X would provide the minimum  extension.  Two would give more extension.

JC

Where are Our Academic Peers?

Another brief beef about the system!

We often complain about the problem of trying to get people to at least consider Johann Bessler's claims in a more open minded way, but in an age of highly defined specialisation, there is a widespread intolerance for ideas that originate outside of ‘official’ university-based frameworks.

There is also a general assumption that if a new theory collides with a preferred paradigm it must be wrong. If you are not toeing the conventional line you are a pseudoscientist. This is academic mudslinging that rejects those who hold a reasoned counter-view.

The world of science is surely an amazing place and in my opinion, one of the most fascinating aspects of life both now and historically. It is a pity that so few people in academia actually use the real principles of open minded consideration of all evidential material, no matter how contradictory it may seem when compared to the current paradigm.

The definition of an academic is someone who has been trained in a given discipline and is subsequently employed by a university to teach and possibly conduct research in that subject. They are expected to work procedurally, to apply scientific testing to their logic and to comply with conventional protocol. This includes the process of peer review prior to the possible publication of new information in academic journals.

But we, who seek to prove that Bessler’s work was genuine, have no academic peers, so we cannot be reviewed and therefore our work cannot be directly published by any of the academic journals.

But.....even if we did somehow become part of an academic peer group, we would have to offer an explanation, if only in the most general terms, showing theoretically how and why Bessler's wheel did not conflict with the current laws of physics. Alternatively demonstrate a working model - have I said that before once or twice?!

JC

Johann Bessler's Logo

In his last and most professional-looking publication, ‘Das Triumphirende…’ (produced in 1719), on page 144, Johann Bessler included a logo-like doodle that at first sight seem attractive to the eye but meaningless.  But there is more to it than meets the eye. I have reproduced it enlarged so that it is easy to see the features incorporated with in it.  The logo is composed of a crown with some curious lettering beneath, some of which on closer inspection looks like the word Orffyre which was Bessler’s name according to the atbash cipher and before he latinised it.  There is some additional lettering reversed on the left side of the middle circle.

If I transcribe the letters into modern font it will be easier to read.  It says:-

HTARORFFYRE, which, when the left side is reversed, reads RATH ORFFYRE.  This means COUNCILLOR ORFFYRE.  

Below that there are 5 letters evenly spaced, which might stand for Doctor of Mathematics, Medicine and Perpetual Motion, attributes he claimed for himself, or possibly Music in place of Mathematics.

Knowing of Bessler’s propensity for using numbers and letters substitution in various ways, I was sure that the logo contained hidden information, and the key to solving this innocent looking code could be found. One of his favourite puzzles used alphanumerics and the above is easy to read.  If D is the fourth letter of the alphabet then applying the same principle to the other letters gives  4 + 12 + 12 + 15 + 12  = 55 (again!) But that cannot be all.

Here is one of those curious, easily dismissed anomalies I have spoken of previously.  Notice the ‘P’; it does not look quite right. Is it upper case or lower case?  If lower case then the upper curved portion is too big; if upper case then the downward portion should not extend below the line of text. Which ever is the intention it should be upper case because the other letters are.  But why are the letters YR above the letter 'P'  conjoined? Is there more to this than just producing five letters or at least five letters if you include the YR as one letter.

A possible clue might be seen in a handrawn version of the logo but with some variations as below

 
In this example the 'p' has a tail similar to the letter 'q' when hand written.  However it might also be also be a 'j' or some other letter, and these puzzles can be read to provide what ever answer you seek!  Notice that in the hand drawn picture Bessler has put the letter 'O' at each end instead of in the middle as in the first logo but this is not as good at providing the link to the two way wheel as the first logo does.  

As for the other features of the logo, the crown represents Karl, the ruler; Rath Orffyreus tells us that Bessler was a counsellor under Karl; the D.M.M.P.M. tells us, in my opinion, that he was a self-proclaimed, Doctor of Mathematics (or Music), Medicine and Perpetual Motion; the number 55 tells us that he was telling us of the importance of the number 55.  Finally, the leaf design is similar to the leaves of the Arondo Domax giant reed, which is commonly used in Organ Pipes of that period, and still is today for that matter.  This is a reference to Bessler’s skills in organ building.

I am leaning towards the letter 'M' standing for music since  Bessler's later connection with organs seems to be more suitable, and of course there are examples of his musical notation for the carillon he was hoping to build one day for another prince, Karl I, Duke of Brunswick-Wolfenbüttelf.

One more item.  This a close up of the centre of the logo, and something that Bessler often used in placeof his signature.....

Very very interesting!

JC

Some more on Bessler's Codes

I've decided to share here, some more of the pieces of  Johann Bessler's coded information which I've discovered from time to time. For brevity I am reducing my explanations, just pointing out my findings and conclusions. The really detailed information is in my book which is steadily progressing and will be published in due course.

I put this clock up here last year but here's another chance to study it along with a little extra information.

Notice that the lines of perspective are as you would expect, all centred on the point of rotation.  I noted that there appeared to be a single gap in an otherwise fairly symetrical arrangment of lines.  I became curious when I noted that the two weights numbered 8 seemed to be on an alignment which passed through the centre of rotation but for which there was no perspective alignment available

The number eight figures seemed to me to be just on a line where you might expect an eight o'clock line to be.  Then I realised that when this line was added there were just twelve lines and made the logical conclusion that they must represent a clock.

Obviously I questioned the point of this inclusion and managed to relate it to another piece information. There appear to be a surplus of numbering in all of Bessler's drawings and this led me to the conclusion that the numbers might be designed to add up to a significant total.  This, as it turned out was correct.  I had already investigated the atbash route, converting numbers to letters, hoping to find a hidden text message but there was none. But the numbers in the above drawing total 660 and  660 divided by twelve (from the clock) comes to 55.   What is the relevance of the number 55?

Chapter 55 of his Apologia Poetica contains the mysterious Declaration of Faith, which also includes 141 Bible references which you can read more about in my web site http://www.orffyreus.net/

There I have shown the existence of a long and detailed code, but so far no one has to my knowledge deciphered it yet. I think that the number 55 had a dual purpose, firstly it related to his machine, and secondly it pointed to the largest piece encoded text.  The other hints at this number are numerous and I'll point out some of them in the next few weeks, but if you want to know Bessler's secret then you need to decipher the part of Chapter 55 I have described in the above web site.

PS As promised in comments, I include picture of the designs at the foot of page 128 on Apologia Poetica.  Do the represent Fibonacci spirals?

 And below is a rough copy of the preface to MT, I assume you meany this and not the actual preface?

JC

Hmm - No References to my Books about Johann Bessler on Wiki.

Curiously, despite the fact that I have added information on the subject of Johann Bessler on Wikipedia and other 'official' search engines, I can find no mention of the five books I published, which give more information in one place than anywhere else as far as I know.  There are no links to any of my web sites though I have added them in the past.

All the references and links point to either historical accounts or negative articles about Bessler.  I have added new information three or four times over the last few years but somehow all those references and the information I provided have been removed.

It isn't because I need to see my name up there but rather, anything that catches the attention of someone with the instinct, imagination and luck to make the leap from merely repeating what every one else has done to finding that unique concept which Bessler found, is exactly what we need. Any method that attracts the attention of the right person is valid.  Without such information on Wikipedia how can people who might be interested find out more about it?  I realise that google offers the ways and means of getting more information but Wikipedia lends authenticity to such searches.

If I was paranoid I might think there was a conspiracy to silence any attempts to promote Bessler's work, but I'm not.  I suppose that because the Bessler wheel type of perpetual motion is declared impossible by  historical precedent, Wikipedia censors anything which might seem to validate his claims.  I guess we could test that out by seeing if any other kind of alternative science which has not been accepted as legitimate by its peers is referenced with links and articles supporting its claims.

It seems to me that the majority of people interested in this subject are of an age similar to my own. Could it be that the younger generations have been brainwashed into believing that an interest in this subject is so laughable that they cannot even take a moment to consider it?

Computers and all their related offshoots require a different discipline quite alien to the way we thought out solutions to physical problems in our youth.  Just as I find it hard to get to grips with computers, so they, the younger generation are taught to find the answers with computers.  I think that we older ones are used to visualising mechanical processes, whereas the new generation can't because they don't need to.

But who removed the references I added to wiki?  Presumably someone with the education to 'know' that my information isn't backed up by the educational institutions and is therefore proscribed.

JC

Gravity plus Gravity Drives Bessler's Wheel

I decided to post this both here and the the Besslerwheel forum to publish my idea about the secondary force involved in Bessler's wheel and hopefully generate some discussion about its potential as possible step forward towards a solution.

I could apologise for writing in simple terms without the use of numbers and formulae, but I won't because I think they put people off and confuse some fairly basic concepts.

Bessler’s wheel used weights, he makes that clear.  Weights can only have an effect if they either overbalance something or they fall – I leave impetus and inertia to one side for now.  

Gravity enables the weights to fall, or as I prefer to say, it makes them fall, therefore let us cut out all the dancing around and say that Bessler’s wheel is driven by gravity.

What about gravity?  It supposed to be a conservative force, but what does that really mean? To me it simply means that it conserves its energy, or to put it another way, it’s a continuous force, therefore no matter how much work it does it is never diminished, at least not as far as we are concerned here on earth. 

We are taught that you cannot obtain continuous rotational motion from gravity i.e. in a wheel.  The reason is that the force acts on all parts of the wheel at the same time, so that even in a overbalancing wheel the falling weight has to be lifted back to its pre-fall position and it has to be lifted against the force of gravity.

In fact this does not preclude the possibility of achieving continuous motion, its just that no one could see how it might be achieved.  It is correct to say that gravity having made a weight fall, cannot be used to also raise the same weight again.  We need another force to raise it back to its pre-fall position.  For hundreds of years perpetual motionists have searched for the other force without success.  Even today we continue to look for the means to lift the weight back up and many have been forced to conclude that it is indeed impossible to find a force capable of acting quickly with equal power to gravity.

That force has been under our noses all the time.  Gravity is the only available force which matches the desired criteria.  Obviously we cannot use the falling weight’s own  kinetic energy to raise it or another weight back up, because that energy has already been used to rotate the wheel a little.

The answer, it seems to me is to have another weight whose sole purpose is to raise the first weight back up.  Obviously this second weight cannot have an effect on rotation or it would negate the rotation gained by the first weight.

Bessler have us two good clues about this.  Firstly he said his weights worked in pairs, and this seems to support the second weight notion.  And he also described in his Apologia Poetica how “A great fat herd of fat, lazy, plump horses wanders aimlessly”.  I think that this describes the weights whose job it is to raise the fallen weight, in their inactive state.  When they are not raising the fallen weight they must be in a neutral position, possibly their action takes place in the Z plane but I have design which does not require that.

JC