A new backplate for my PoP wheel

Because I'm now committed to building what I believe will be the (finally!) successful reconstruction of Bessler's wheel, I have retired my current backplate. That is the wooden disc upon which I have mounted numerous mechanisms over the last year or so. I have about fifteen retired backplates of assorted sizes and I should throw them out but they represent such a lot of time and effort that they seem like old friends and I'm loath to part with them. The one I've been using has so many holes in it that it looks like it will fall apart. Now, when I drill a new hole
there is every chance I'm going to drop part way into an existing one and produce an odd-shaped over-size hole. So a new backplate for my proof of principle wheel is a must. The old ones vary in size but the new one I made yesterday is only two foot in diameter, which is smaller than I usually use.

Normally I make the backplate much bigger to allow for alterations to the size of the mechanisms and the number of them and their range of movement but in this new one I don't need such a large backplate. The material I use for the mechanism is mild steel and I am able to use and reuse this over time. Obviously the parts get altered and reduced in size in some cases, but because the new design is so similar to the one I last used I don't need to alter it much, so some parts are exactly the same. Because of this I know exactly how big to make the backplate because I have the existing arms and I can plot their range of movement precisely and fit them into an area whose size is also known exactly. This can be one of the difficulties in designing and building something from scratch, you have to use a certain amount trial and error, in part, to discover how big to make it so that it will not come into conflict with other parts and at the same time, keep the range of movement within the confines of its selected area.

So today I was hoping to mark out on the backplate the positions of the various holes needed to support the mechanisms, drill and fit the supporting posts and try to make one working mechanism which performs at just the right moment and in the right way. Because once I have one of them acting in the desired manner, its just a case of copying the same for the other ones.
That was in theory! In fact I had other calls on my time so I didn't quite get that far today.

JC

No news is good news, on holiday or not!

I've enjoyed my break away from the news, the internet and all input about Bessler, but now I'm back and raring to go!

I spent several hours a day going over and over, in my mind and on paper,the best way to proceed and I believe I've covered every aspect of the reconstruction. It's not so much that it was wrong and needed redesigning but more a case of re-examining how else I might get the existing mechanism to operate at the right time. In the process I have altered it slightly and have made it simpler and there is less chance of any of the constituent parts coming into conflict with each other.

What is really interesting is that I think I've discovered (or re-discovered) an interesting leverage design which certainly complies with everything on the 'toys' page and which I, at least, have never come across before. It ties in neatly with parts A, B, both C's and D's and the E on the toys page. It is as far from what I originally thought the parts on the toys page meant as it could possibly be and yet it looks and feels right. I know that this is neither a suitably scientific approach nor a desirable engineering attitude but sometimes you have to go with your gut feeling.

For those who have no idea what the 'toys' page is about I can only ask you to read my biography of Bessler. It would take up too much space here!

I've written out a detailed sequence for the build and have drawn numerous sketches of each part to try to obviate any more errors due to haste and carelessness. So.....this time?

I've got to do a few things to do first and then I will get on with the reconstruction. I feel that time is slipping by and if I don't get this right soon then I have to make the decision about publishing everything. It is tempting to continue to worry at this problem in the hope of success, but I have to admit that the past thirty odd years have not seen success, as many people keep reminding me, yet I don't believe I have ever been nearer to victory.

JC

Spanish break.

Because I'm away to Spain for some R & R, and may have limited access to the internet I probably won't post anything on my blog for a couple of weeks. I have a plan written up for my return as I have worked out precisely what needs to be altered in the design of the mechanisms, but I shall mull over the design during my break. With luck I shall be back on course for reconstructing Bessler's wheel on my return.

It surprises me that, given everything I know about the mechanism, I should have made such a simple error as not ensuring that the mechanism operated at the correct time in the rotation of the wheel. I wonder how many other trials by other would-be inventors failed because of something similar, something that maybe went through unnoticed. How many near-misses have their been?

Lastly, thank you for the many messages of encouragement. I had no idea so many people were following this blog.

"Una cerveza, por favor!" - Make that "Una grande cerveza, por favor!" Just practising you know ;-)

Sadly for us Brits, we seem to be a country that is fast developing a binge-drinking culture with the predictable side affects of under age drinking. In Spain you see hardly any drunks and yet they appear to indulge for several hours a day. It must be the drip drip approach that allows them to maintain their dignity despite being several sheets to the wind. In the UK we seem to hit the ground running and attempt to get as many jars of the strongest nectar available down our necks in the shortest possible time - with predictable results.

What's that saying? Oh yes - Alcohol, the cause of, and the solution to all of life's problems.

See you when I get back.

Ciao.

JC

Reconstruction analysed

I have spent time testing the reconstruction I created and following analysis of the wheel's action I am certain that the problem lies in timing. In the paper I have written in which I described the design and principle which underlies Bessler's wheel I made specific comment about the necessity to get the timing correct. It is therefore somewhat embarrasing to admit that I had forgotten to ensure that the weights, when moved, did so, not one moment before a particular point during each revolution. In fact they are acting too soon and having an effect which is
tending to counter the advantage they give towards rotation.

There are a couple of ways I can correct this and one of them is to lengthen the operating arm which moves the weight so that it is further on in the cycle when the action begins; and another is to try to delay the initiating action of the operating arm. I realise that this means nothing to anyone who hasn't seen the design, which is everyone, but I still want to keep people updated as to the state of play regarding my project.

The paper I referred to above is still being kept confidential for now.

JC

Bessler's wheel still stationary!

Well I said I'd report back, so here it is - unfortunately the latest design doesn't work. Despite this setback I remain confident because the information I have acquired from Bessler indicates that I'm on the right track. There are variables to this design and maybe others that I'm not aware of at this point so I need to go away and think about the alternatives. I'm unable to work on the reconstruction for now, anyway, as I have other plans for the next two weeks.

This news of my failure to finish with a working model will hearten many and disappoint others, but for me it is a case of keeping going. Because, as I have said before, I understand the concept which underlies the Bessler wheel and I have also managed to find some sketches of the actual mechanism, which will doubtless provoke a great deal of interest. It may be that I have misread the sketches and need to review them in a calmer state of mind.

The concept or principle upon which the Bessler wheel relies is simple and obvious once you know and, in response to more emails received, I can assure anyone reading this that there are no physical laws which will need revising to accomodate it. There is no doubt about this and I have no fears of anyone disagreeing with me once they understand the principle.

Of course there will be some who will say, 'share it - now!' But my mind is made up not to patent it (if I'm sufficiently lucky to succeed in this self-imposed task) and that could leave me potentially penniless for all my hard work, so once I give it away I have only the book to provide for me and my family. That's when I'll share everything.

JC

MIB, conspiracies and wacky wagers.

I have received two emails which have prompted me to comment on them here. The first one arrived a couple of weeks ago and suggested that by publicly recording my attempt to reconstruct Bessler's wheel, I might attract the attention of certain gentlemen-in-black (MIB). They, it seems, have only the best interests of the oil industry in mind and would take exception to my project. I was warned that they would visit me and takes steps to make me wish to stop my project.

I have always tried to keep an open mind about most things and I've tried to arrive at a satisfactory opinion by applying logic. It seems to me that the MIB, if they exist anywhere outside the vivid imagination of Hollywood, would not be against my project at all and might actually be inclined to support it. The whole world knows oil is short and likely to get shorter, so, from their own perspective, anything which helps to extend the life of the reserves of oil has to be seen as a bonus and therefore ought to be encouraged. The internet seems to be a breeding
ground for conspiracy theories, and if I believed most of the conspiracies I read about I would become totally paranoid (instead of only mildly). I incline to fatalism and if I'm to be a target for the MIB then there's nothing I can do about it.

The other email asked whether, seeing as I had not posted anything much this week, I had failed in my attempt to reconstruct Bessler's wheel, implying, perhaps, that I did not wish to admit it? Of course not, I have been diverted from my intended course by the usual mundane requirements of everyday living and although I try to get into my workshop daily, I can't always. I shall report success and failure equally with alacrity and honesty.

As for my reconstruction of Bessler's wheel, I have two mechanisms fitted and working and the rest assembled but not yet fitted to the backplate. I shall continue to work on it and hope that soon I will finish it.

It is strange world that I inhabit where the prospect of finishing this project and securing the future of my family takes second place to the necessary but trivial-seeming tasks of every day living, but then I can't really blame the family. I have after all, claimed to be on the verge of success for at least the last twenty years! They can't see inside my mind and know, as I do, that it really is nigh.

And finally, as they say on the news, the thought of offering odds against my producing a gravity-driven perpetual motion machine at any time in the future seems to have scared away the betting firm which had expressed an interest, so no dice! They were dithering over the exact definition of what constitutes perpetual motion and in the end decided not to offer odds.

JC

The wacky wager update

Well, two comments, one pro and one con and several emails, mostly for. I understand your point Lucius but there are needs which are not personal but which I would like to be able to satisfy if it were possible. My family has needs and there are others I could wish to help if I had the means, so for that reason as well as the others I mentioned before, I shall stick with my proposal to obtain odds against the creation of a gravity-driven wheel within the next year - and that has raised another issue.

I have been corresponding with one of the best known names in the gambling industry and it has become clear that they wish to use the term 'perpetual motion machine' and have the resulting device verified by the famous Science Museum. That seems very reasonable but I am concerned that when the time comes for verification the Science Museum's definition of perpetual motion might exclude my machine.

I have discussed this definition many many times and the whole thing seems to come down to the fact that a perpetual motion machine is defined as one which is excluded from all external sources of energy. I have always maintained that a gravitywheel obtains its energy for rotation from the force of gravity and since gravity is both external and internal to the gravitywheel it is not technically a perpetual motion machine although that is what they would have called it in Bessler's time.

I have compromised by suggesting that they could call it a 'gravity-powered perpetual motion machine'. I await their response.

JC

Blog colour change and mechanism update

Sorry for changing the look of my blog, but I'm trying to get to grips with it and increase the size of the blog posting window.

I have been working on redesigning the mechanism inside the wheel, because it sometimes locks in a half-way position. This is due to the close proximity of another part of the mechanism. I have changed one of the levers for a longer version and then I took up the extra length by creating a hump or bridge in part of its length. This enables it to pass over the offending obstacle in its path.

The mechanism moves freely now and does what I want it to do, so my next task is to assemble the remaining mechanisms in the same way as the first. This design won't suffice for a finished product but it will certainly do for a proof of principle model which is all I want.

In attempting to make this machine I have, over the years, used and reused various parts, and the part which has suffered the most is the backplate which is what I call the wooden supporting structure to which all the parts are attached. It is in the form of a three foot wide circular disc of MDF (medium density fibreboard). The current backplate is nearing the end of its useful life and will have to be pensioned off soon. The disc is so full of drilled holes from previous attempts at making a working model that now when I drill I often drill into an adjoining hole and when held up to the light the backplate looks like a representation of the sky at night!

I'd put up a picture but it has a number design features drawn on the backplate which might give someone a clue to the direction I'm taking.

JC

Should I bet on a certainty?

I wonder if it is possible to place a wager on the likelihood of the appearance, in the next twelve months, say, of a gravitywheel? If I am really convinced that I shall succeed in this venture then I suppose I should put my money where my mouth is and wager that I, or some other misguided fool, will indeed produce such a machine and one that works?

Certainly the rewards would be exceptional. I have yet to receive the exact odds available (I have applied for them) but suppose odds of 5000/1 against such a thing happening in the next year were offered; it might persuade me to part with say £50 or even £100 for the promise of upto half a £million!

The history of betting is full of off-the-wall wagers and this is almost respectable by comparison. At least I'm not betting that the earth will be governed by aliens by 2010 or that the Elvis will resurrect next year, which some have bet heavily on!

This wager has a certain attractiveness to it for me because it simplifies the actions under consideration should I succeed in my venture. I could just show the working wheel on youtube and then pocket the winnings from the wager.

No patents to worry about; no contracts to sign to sell the device ; instant availability for anyone with internet access - and of course the publishers would contact me for permission to publish my book instead of the other way around where I have currently papered the walls of my office with rejection letters.

Some may say that giving it away is foolish and I could earn tens of millions but the truth is I don't need millions, (just a couple!)


JC