Considerations about Johann Bessler and His Wheel.

The basic requirements for building a successful gravity-enabled wheel can be quite simply described, although obviously not as easily achieved!

The scepticism that we face includes the well-established “fact” that according to the laws of physics we cannot design and build a perpetual motion machine. Well, this is true if you make it completely isolated from any form of energy; an isolated system.  This is not my definition, but it’s what we are taught and yet what kind of fool would even imagine that it might be possible?  No external energy source! But I have never believed in that, nor wanted to do so.  No, it has always been my belief that gravity holds the key; a force of nature which could enable a perpetual motion machine, or a gravity-enabled machine to run continuously.  Which of course means it can’t be a closed system.

Yes I know gravity is not a source of energy!  But to my mind it is!  Ok it’s not a energy source in the accepted sense, but it causes things to fall, and that means there is the potential to harness the energy of the fall.

You cannot get more energy out of a machine than you put into it, and when friction is added there is no spare energy to even complete a single rotation. I only want to use the same energy from the machine that I put into it, not more - but I also want it to do work as well as run itself....so I need to put  more energy into the machine just to complete at least one rotation. If several weights could be designed to fall resulting in one complete rotation, and then repeat the action, we wouldn't have a problem.

How to put extra energy into the machine so that there is enough for it to overbalance and complete a rotation? Find a way to enable gravity to start the rotation and also take more energy from gravity to continue the rotation, by designing a system that resets the weight after each fall, before it gets to the point where it needs to fall again. Continuous rotation will cause it to accelerate up to a certain speed.

But when it's stationary, is it in a state of permanent imbalance?   It depends; if the first bit of rotation requires a fall before it begins to rotate a little, then without the fall no rotation can take place.  But if the wheel had been stopped after the fall had ocurred then the wheel will turn a little.  In my opinion, the fall takes place at the same time that the preceeding weight resets.  So the effect is for the wheel to be permanently out of balance, which is why Bessler applied a brake to keep it stationary.

To add more energy than the wheel needs to complete one rotation, it is not sufficient to increase the number of mechanisms or over-balancing weights, because each one has to be reset in order to fall again at the right place.  There has to be a resetting mechanism.

One more thing here.  Bessler made certain claims that were fully backed up by demonstrations and eye witness's accounts, many of whom were out to prove him a liar.  So why, if we accept his claims and almost everything else, do some people maintain that the wheel could not have been permanently out of balance.  Some have suggested that the wheel was stopped in a certain position so that it would begin to spin as soon as the brake was released.  Bessler stated more than once that the wheel started to spin spontaneously as soon as the brake was released.  This fact was reiterated several times by witnesses. Why accept most of the evidence and reject some of the rest?  Why would Bessler lie about such a thing, so trivial when considered against a backdrop of everything else?

In a few weeks I will know if my wheel works or not, but I do know that I have deciphered  a large amount of clues which I hope will astound and amaze you!

JC

  Please share the following link and donate if you wish to aid my granddaughter's treatment.

                                                                  www.helpamy.co.uk/

Necessity is the Mother of Invention. -

Everyone's heard of the old proverb, 'necessity is the mother of invention', thought to have originated with Plato, and there are plenty of historical examples of its truth in action.

It describes the situation where a need arises for which there appears to be no immediate solution, in the end someone often invents something that solves the problem.  If you really need to find a way to do something you will find a way ..........eventually.  It might take more than 300 years to do it!

All the developments in the field of medicine, for instance, have been achieved through research necessitated by the needs of people seeking longer, healthier lives.

Man first discovered fire to light the darkness of the caves he inhabited and to keep warm. The wheel was invented to help move himself and his possessions from one place to another; boats to move on water; sails to speed up that movement and reduce the need for oars and oarsman. Windmills to grind corn and pump water for irrigation etc. 

The list of inventions designed to relieve a human need is vast but now there is a need for a clean  and cheap or even free kind of energy, to produce electricity. This is not a desire, it is a desperate need.  300 years of fossil fuel-derived energy has resulted in global warming. The icecaps are melting, sea levels are rising, low lying lands will be submerged.  The weather is becoming more variable and extreme.

We have been taught that gravity-enabled engines that can work continuously without the assistance of streams of water, or strong winds, or specially arranged weights, are impossible, but this should not necessarily blind us to anything which might appear to contradict this long held opinion  on the matter.  If there is good evidence that the current view might be erroneous, then the evidence is worth re-evaluating no matter how certain the over-riding consensus is, that the evidence is misleading.

Johann Bessler went out of his way to provide the best possible evidence that his machine was genuine without allowing anyone to see the inside and learn how it worked.  Apart from his ruling prince, Landgrave Karl of Hesser-Kassel, a man of unimpeachable reputation, no-one ever saw the internal workings of his wheel. Karl stated it was genuine and we have no reason to disbelieve him, nor any doubt that he fully understood the device.

No matter how convinced the sceptics are that his wheel was a fake,  not a single one has come up with a sensible explanaton which tells us how he faked it.  No-one can explain how he managed to fool so many people for so long, including some of the brightest scientists of the age.

Ever since I first encountered the legend of Bessler's wheel I have known intuitively that such a machine was possible.

Yet despite the utterly convincing evidence that Bessler did not lie, we continue on our way seeking answers to a question which has already been resolved - how to obtain cheap, clean electricity.

  Please share the following link and donate if you wish to aid my granddaughter's treatment.

                                                                  www.helpamy.co.uk/

JC

I'm Aiming for 6th June 2019 to Publish Details of My Wheel.

I have published a commitment to complete what I believe to be Bessler’s wheel, comprising the same internal design as his, by the 6th June this year. I chose this date partly because I’m determined to finish it as soon as possible, and the 6th June is only a few weeks away -  and also because Bessler first exhibited his wheel on this date, in 1712.   I have said that I have detected and deciphered more and more of the design over a number of years, and I am convinced that I know the whole solution. I’m 74 years of age and think that I had better share what I know while I am still fit and able.  Not that I am suggesting that I am too old to continue if this doesn’t work - I’m just being cautious!

Being aware of countless failures in the past, I am prepared to accept the possibility of failure this time, but unlike every time before, I shall publish everything I know.  Now my promise may sound empty because no one knows whether my current knowledge is worth a hill of beans; well it is quite extensive and will surprise many people once they learn how much information I have uncovered, but the proof will have to wait until I’ve finished and tested my wheel.

Despite lacking much free time to work on my wheel, I’m certain I can complete this project on time and there is nothing so disciplining as the pressure of a finishing date, or publishing,date.

There is also nothing so demanding as the rise of the spectre of global warming.  Action groups such as Extinction Rebellion are using so-called nonviolent resistance to avert climate breakdown, halt biodiversity loss, and minimise the risk of human extinction and ecological collapse. I don't agree with their methods which harm people trying to get on with their lives, and I don't accept the argument that those people should be concerning themselves with the future rathere than living their lives. We get the message, please no more! The protest group were established in the United Kingdom in May last year with about one hundred academics signing a call to action in support in October 2018.  They want to rally support worldwide around a common sense of urgency to tackle climate breakdown.  One of their suggestions was that the British government should put in place requirements to reduce greenhouse gases to zero within the next five years! 

The ramifications of such a policy are so far beyond any possibility of attainment that I suspect it was a dramatic statement based on imaginary ideals but designed to goad politicians into action.  In my opinion the solution they all talk about is at hand - Bessler's wheel. 

A successful demonstration of the wheel and its potential to generate cheap, clean electricity would do more than all the political gesturing currently entertaining us (or irritating the hell out of us) around the world.

So 6th June 2019 is when I will publish all the information I have, whether the wheel works or doesn't.  If/when it works we shall tell the world we have a solution.

 Please share the following link and donate if you wish to aid my granddaughter's treatment.

www.helpamy.co.uk/

JC

Primum Mobile or Primum Movens - The Unmoved Mover.

I was reading, yet again, how the force of gravity cannot possibly be a source of energy.  It's not just the world at large who refuse to accept the argument that gravity can be tapped, there are many members of the Besslerwheel Forum who also subscribe to that view.  And yet they can only posit the possibility that there must have been some additional source of energy which Bessler discovered and which we must be able to use as well.

So perhaps we should look at the reason why gravity can be used as an enabler of continuous rotation        .

Almost 2500 years ago, Plato insisted that with inert matter in motion, because it is not the cause of its own motion; its motion requires a moving cause different from itself. This moving cause cannot itself be of such kind that it also requires to be moved from without.  To put it another way There must be an unmoved mover, or  'that which moves without being moved'. 

A prime mover (Latin: primum movens) is a concept advanced by Plato's best student, Aristotle, as a primary cause (or first uncaused cause) or "mover" of all the motion in the universe.  He wrote, 'as is implicit in the name, the "unmoved mover" moves other things, but is not itself moved by any prior action.

He wrote, 'if it is true that when A is in motion there must be some B that moves A, then if B is itself in motion there must be some C moving B, and so on. This series cannot go on forever, and so it must come to a halt in some X that is a cause of motion but does not move itself—an unmoved mover.  Oddly, Aristotle is venturing close to describing a perpetual motion, which he implies is impossible within the context of his argument.

Briefly, then, there has to be an initiator of motion, or ‘first cause of all the motion in the universe’.  "The unmoved mover”, moves other things but is not itself moved by any other prior action. We know of only one unmoving mover - gravity.

So primum movens or primum mobile referred to by Bessler and used in conjuction with his statement that the weights in his machine are the actual cause of his perpetual motion, must apply to the action of gravity upon his machine, and be the sole cause of its rotation.

Gravity is an unmoved mover.  The source or initiator of every other movement in the universe can be traced back to the effect of gravity.  It is not regarded as an energy source because it is a conservative force.  A conservative force is a force with the property that the work done in moving a particle between two points is independent of the path taken. The gravitational force is conservative because the work done by the gravitational force on an object depends only on its change in height.

Because gravity is indentified as a conservative force and because its work done in moving a particle between two points is independent of the path taken, it is understood to rule out gravity driven continuously turning wheels - such as Bessler's.  We know that Besser's wheel was not a closed system, therefore it had access to an external force. There is no other 'unmoved mover' force in the universe as far as we know, therefore the only force which fits the bill is gravity.

Notice how we repeatedly state that gravity does do work. If it does work it consumes energy, but that energy is limitless, so although it expends energy, it never runs out.  It is perpetual, so now we have a force which apparently consumes energy and does work and does not exhaust its energy supply.  If that does not decribe a force which can supply endless energy, I don't know what is.

If we could find other conservative forces which drive mechanical motors then we might understand why Bessler's wheel worked.  Wind pressure and water pressure are conservative forces which drive mechanical motors, but they move, due to various causes among them, gravity.

We know the point of interaction between gravity and the wheel; it is the weights.  They are doing the same job as air molecules do with windmills, and water molecules do with water wheels. or hydro-electric dams.  The weights do the job of interacting between gravity and the wheel, causing it to rotate continuously, if the configuraton is correct.

I will be posting my own thoughts on this as soon as my wheel has been finished and tested  - working or not. 

Please share the following link and donate if you wish to aid my granddaughter's treatment.

www.helpamy.co.uk/

JC

 

My Plans, Intentions and Hopes for 2019.

So often, I am asked a number of questions about my plans and intentions; when will my wheel be finished? What will I do if it works? What will I do if it doesn't work?  So here are my intentions and hopes.  Of course it's always wise to bear in mind the ancient proverb, 'Man proposes, but God disposes', so subject to that advice.....

I will finish the wheel within a few weeks. Sorry I can't be more specific about the time, but there is a lot going on in my life at present which takes away some of the time I could be spending on the wheel, but that is normal life and one of the reasons why Bessler said he succeeded where everyone else had failed; he had no family and no permanent job, so he could spend as much time as he needed working towards the solution to his wheel.  I anticipate that it could be finished before the end of this May, but you know how time slips away and it could be June before I finish and test it.

If it works, I will take a video of it working, and add explanations showing how it works and provide some of the clues I deciphered to prove that it is the same concept as Bessler's. I have some other ideas which are still under consideration, but there will be no patent application to protect the design.  I have received an offer to freely globalise the design from an influential person which I am considering,  and I shall post on one of my websites more details of the mechanism and more of the clues I discovered which lead me to believe that I have the solution. There will be links to the video and photos of its interior.  

If it doesn't work, and I have certainly experienced that more times than I care to recall, I shall post details of my design and the clues they derived from, in the hope that someone else can take it forward to get to the actual solution that I presumably will have missed.  I really can't delay that information any longer.

At the New Year I reaffirmed my certainty that this year would see Bessler's wheel working.  My reasons for sounding so sure, more this year than previously, was due to the fact that the many clues I had found were so cleverly constructed that, once I understood how they were designed to mislead and got the meaning, I did not have any doubts about their validity. I'm sure many people will think I'm deluding myself, and the wheel won't work, and though that may be true in part, I am confident that when the hidden information is deciphered there will be  a consensus that the clues are real but perhaps I have missed some important feature that is all the mechanisms needs to work as Bessler's did.  But I remain confident that this time the wheel will work.

There will probably be a slight gap betweeen the wheel test and any announcement, regardless of success or failure, as I will need time to assemble the appropriate text and drawings to publish.  Much of it has been already accomplished but there are a few things I need to finish before publication.  In the mean time I will try to post the occasional blog just to let you know I'm still here and working on the project.

You could if you wish donate to or share my granddaughter's crowdfunding site by visiting it at..........

www.helpamy.co.uk/

JC

Bessler’s Wheel and the Orffyreus Code.

As I wrote  previously, I’m temporarily recycling a previous post about the Legend of Bessler’s wheel,  because I need to concentrate on finishing my own attempted reconstruction of his machine.

As you can see from my previous post, there is a lot going on in my life but there is always the odd moment when I could work on the wheel.

At my age I find time seems to be accelerating and weeks shoot past and I seem to have accomplished very little.  I am determined to finish it now so I can prove to myself, at least, that I am right and that there are sufficient clues from Bessler to permit anyone to build his wheel. Success would mean that the design I’m working on would match his, which I know many people doubt is possible.  Obviously I will post the information here first, if it works - or even if it doesn’t.

Please feel free to comment if you wish and I will try to check back daily.

So here it is again, the Legend of Bessler's wheel.

On 6th June, 1712, in Germany, Johann Bessler (also known by his pseudonym, Orffyreus) announced that after many years of failure, he had succeeded in designing and building a perpetual motion machine.  For more than fourteen years he exhibited his machine and allowed people to thoroughly examine it.  Following advice from the famous scientist, Gottfried Leibniz, he devised a number of demonstrations and tests designed to prove the validity of his machine without giving away the secret of its design.

After more than thirty years he died in poverty.  He had asked for a huge sum of money for the secret, £20,000 which was an amount only affordable by kings and princes, and although many were interested, none were prepared to agree to the terms of the deal. Bessler required that he be given the money and the buyer take the machine without verifying that it worked.  Those who sought to purchase the wheel, for that was the form the machine took, insisted that they see the secret mechanism before they parted with the money. Bessler feared that once the design was known the buyers could simply walk away knowing how to build his machine and he would get nothing for his trouble.

This problem was anticipated by Bessler and he took extraordinary measures to ensure that his secret was safe, but he encoded all the information needed to reconstruct the machine in a small number of books that he published. It is well-known that he was prepared to die without selling the secret and that he believed that post humus acknowledgement was preferable to being robbed of his secret while he yet lived.

I became curious about the legend of Bessler’s Wheel, while still in my teens, and have spent most of my life researching the life of Johann Bessler (I’m now 74).  I obtained copies of all his books and had them translated into English and self-published them, in the hope that either myself or someone else might solve the secret and present it to the world in this time of pollution, global warming and increasingly limited energy resources.

It has recently become clear that Bessler had a huge knowledge of the history of codes and adopted several completely different ones to disguise information within his publications.  I have made considerable advances in deciphering one of his codes; the simplest one, and I am confident that I have the complete design.  Due to unfortunate family circumstances I am currently unable to complete the build I have undertaken but shall return to it as soon as possible and I sincerely believe that 2019 will see the reconstruction of Bessler’s wheel.

Johann Bessler published three books, and digital copies of these with English translations may be obtained from the links to the right of this blog.  In addition there is a copy of his unpublished document containing some 141 drawings - and my own account of Bessler’s life is also available from the links.  It is called "Perpetual Motion; An Ancient Mystery Solved?"  Bessler published three books; "Grundlicher Bericht", "Apologia Poetica" and "Das Triumphirende..."

I have also published Bessler's collection of 141 drawings and I have called it Maschinen Tractate, but it was originally found in the form of a number drawings of perpetual motion designs. Many of these have handwritten notes attached and I have published the best English translation of them that I was able to get. Bessler never published these drawings but clearly intended to do so at some point.

For some ideas about Bessler’s code why not visit one of my web sites at www.theorffyreuscode.com

One last thing.  Perpetual Motion machines have been utterly proscribed and Johann Bessler’s claims ridiculed - however, it seems that more than a handful of scientists have now come to the conclusion that it might theoretically be possible to design a mechanical system which is continuously out-of-balance and therefore will turn continuously using the repeated fall of weights for energy.  Gravity but not directly.  These open-minded people remain tight lipped for now, awaiting proof of their hypothesis.

JC

Help Our Amy to Walk Again

To my regular readers, I apologise for this post which is completely off-topic!  I have put up a crowd funding page to try to raise funding to get my granddaughter, Amy, much needed rehabilitation treatment. I would not have posted it here as a blog if it wasn’t so important. There follows a brief account of an unbelievable series of events, leading to the fundraising.

Amy before she became ill

In the beginning my daughter, Jo (Amy’s Mum), was diagnosed with stage 4 Lymphoma in November 2017, and was in hospital for many months having chemotherapy, and then 3 weeks of radiotherapy. She, thankfully, finally went into remission in September 2018.

While Jo was an in-patient at UHCW, (University Hospital, Coventry) Amy became unwell with croup, but it was a bad case - and this is where her nightmare began, she got admitted into hospital in December 2017, and ended up in an induced coma.

Then the Doctor didn't insert her cannula correctly and from that she got an infection in her left hand where the cannula had been, and she developed CRPS (Complex Regional Pain Syndrome), at the time her mum was having chemotherapy. In fact, they were in the next ward to each other at one time!

CRPS is an extremely painful disease which has affected her left arm. The pain is present 24/7 and is said to be worse than child birth or amputation.  Drugs do not help to dull the pain and although there are many people diagnosed with this disease there is currently no cure.  However some patients can be helped to live with the problem and as Amy is such a fighter, we think she can benefit from the treatment on offer at the STEPS clinic.

The CRPS gave Amy a severe intolerance to dairy products, which have caused her to have several anaphylactic shocks when accidentally given cheese, or milk.  She has to have two loaded epinephrine hypodermics (epipens) within reach at all times.

Amy has been in and out of hospital since December 2017, and presently she has been an in-patient since September 2018, not even coming out at Christmas.

She was a Primary School teacher, with a first class honours degree and she loved her job.  But she hasn’t worked now since December 2017, it’s absolutely heartbreaking for her family to see her this way.

In Amy’s own words:- 

‘I am fighting a few debilitating and very painful conditions, which are unfortunately extremely difficult to treat. The past 18 months have been terrible; with my Mum having stage 4 cancer (thankfully in remission now) and me suffering from multiple disabling conditions. I have mostly been in hospital over this time, spending the majority of it, including now, bed bound in hospital as I can’t use my legs, sit up independently or use my left arm. My CRPS also sadly spread to my internal organs; meaning that I find it extremely difficult to take food and liquids orally, sometimes including my own saliva, so I depend on tube feeding the majority of the time. 

Unfortunately the hospital that I’m currently in doesn’t have the skills and are not equipped to help me 😢. I have been referred to specialist NHS hospitals but the waiting lists can take 1-2 years. We are very scared that if I wait that long, I will just continue to get worse over that time.’

As the family are very worried at the prospect of waiting 1 to 2 years for specialist help, we have set up a Crowd Funding page to help fund private care at STEPS, in Sheffield, who have an excellent record in the treatment Amy so desperately needs to get her walking again. Currently, it will cost approx. £5,000 per week. I don’t know how long she will be in there, depends on how well she does, I suppose.

These are the links to two sites, there are others posted by Amy on her crowd funding page:-

http://gofundme.com/help-our-amy-to-walk-again

https://www.stepsrehabilitation.co.uk/

Thank you for reading this and if you can recommend a contact or share it on facebook or even make a donation, no matter how small, we would be extremely grateful.  

This is a quick update and probably the only one l'll do here,  until Amy starts her treatment.  In seven days we have raised over £4000, a long way from the £100,000 she needs, but we have been inundated with requests for interviews from newspapers, magazines and radio stations. We have signed with a press agency and they will posting articles and photos etc to every paper, magazine and news media outlet in the country and even some abroad, on wednesday next week.  Hopefully the total will then climb quickly towards the £100,000.

Kind regards

John Collins

https://www.gofundme.com/help-our-amy-to-walk-again

www.warriorprincess.online 

www.helpamy.co.uk