I'm approaching the end of my Bessler wheel prototype construction, in fact I should finish it in the next few days. I feel exhilerated and full of optimism and I'm confident that it will work. Of course I always feel that way, otherwise I wouldn't be continually constructing and reconstructing gravitywheels!
Nevertheless I think that, coupled with my understanding of the basic principle and what I have discovered about the mechanism, that this one will work and will not become entangled with its other parts. I have to finish this one before next Wednesday as from then I shall be off-line for a few days and if I don't finish it before then I won't be able to tell anyone about it, until I'm back online!
As promised, if this one should fail, I am ready to publish everything, but it may be a few days before I can do either.
Nevertheless I think that, coupled with my understanding of the basic principle and what I have discovered about the mechanism, that this one will work and will not become entangled with its other parts. I have to finish this one before next Wednesday as from then I shall be off-line for a few days and if I don't finish it before then I won't be able to tell anyone about it, until I'm back online!
As promised, if this one should fail, I am ready to publish everything, but it may be a few days before I can do either.
PS I wrote the above last night and forgot to add the following;
There is a tendency to envisage the right mechanical arrangement as having the potential to move a weight the maximum possible distance in order to achieve the greatest leverage. Against this one should balance the need to move the weight as quickly as possibel ( to make it fly upwards lightly) as suggested by Bessler. Such a rapid motion needs the distance the weight is to be moved to be less than that envisioned in order to achieve more speed over distance. Bessler states this quite clearly and even provides information on the exact distances required to be included in the mechanical arrangement.
JC
JC
I can't wait to see just how quirky and cockeyed the whole thing is.
ReplyDeleteI am not a believer any more.
I only want anyone to be a believer when they can see the working wheel.
ReplyDeleteJC
I hope and pray that it does work, John. I loved reading your book about Bessler's wheel, and I believe that his wheel must have worked, so good luck to you!
ReplyDeleteWILL IT WORK AT MINUS TWENTY DEGREE CELSIUS?
ReplyDeleteNo reason that I can see why it wouldn't work at cold temperatures. You might need a special lubricant that tolerated low temperatures.
ReplyDeleteJC
Which materials is your prototype made of? Wood? Plastic?
ReplyDeleteIf John's device works,it will be John's wheel
ReplyDeleteinvention,since Bessler did not left any writen,
technical documentation about his wheel,it is almost imposible to claim that (I have Bessler's
wheel).
If one uses dry Full ceramic bearings there's no reason why it should not work at any temperature! In anycase I don't think it is a good idea to publish its mechanism even if it does not work because I do not want to be accused of copying any one's ideas.
ReplyDeleteMy wheel, Vincent, is made of mild steel on a disc of medium density fibre board (MDF)and rotating (hopefully) on a mild steel threaded rod.
ReplyDeleteYou may be surprised at what you learn when I reveal the clues that have guided me to this point, Vincent. It will undoubtedly prove to be very similar to Bessler's design.
I think you should publish Trevor, no one is going to accuse you of copying anyone's ideas. Even if it doesn't work it might provide valuable assistance in solving the problem, by someone else, maybe.
JC
Hey John... and its diameter?
ReplyDeleteJohn,I am on your side,
ReplyDeleteIt will be solely your invention and not Bessler's
Yes!...but if you disclose the mechanism to anyone no no Patent office on earth will touch it. You must keep your options open.
ReplyDeleteDiameter is only 24 inches. Thanks Vincent. Yes Trevor, but I don't intend to patent it whether it works or not.
ReplyDeleteJC
This is exactly why, John should not succumb to any external pressure.
ReplyDeleteDear John... I read Bessler had a lot of trouble tuning up his wheel and he spent quite a bit of time doing it, before he could make it run. Would you mind to tell us if your prototype’s mechanisms have means of adjustment to tune it up? Or if it has parts that can be bent or aligned, also to tune it up?
ReplyDeleteHaving read John’s PS, one has nothing to say, but: Hey, John is on the right track!
ReplyDeleteCongratulations, man, our best wishes to your proto.
Crossed fingers for you John.
ReplyDeleteTake care
Martin
Hi Lucius, there are some ways of adjusting/tuning the mechanisms, such a bending parts, but the main adjustments have to be done by moving the positions of the pivots and that is a real problem.
ReplyDeleteThanks for the expressions of support guys, much appreciated.
JC
There is more reason for Patenting than meets the eye. While you think you may not get perfect protection for your rights,without this stratergy,no bank or investor will be inerested.Let's face it,the whole world is going to want this wheel and somebody has to mass produce it.
ReplyDeleteJohn... Trevor is right; I also think you should reconsider a patent before you show your wheel.
ReplyDeleteExcuse me, DrWhat... Who we go again?
ReplyDeleteWhy would John need a bank or investor? If his wheel works, he will be able to name his price for interviews. The whole world will be knocking on his door, desperate to get exclusive rights to interview him - he will literally be able to name his price - whichever media outlet gains access to him will make a fortune with his story.
ReplyDeleteLucius Anneus. By that I mean the patent discussion. With no disrespect intended, it has been discussed many times ad nauseum. Lets let the experienced John Collins make his own decision when the time is right.
ReplyDeleteBeing I a newcomer, DrWhat, how I was supposed to know the patent’s affair has been discussed many times ad nauseum?
ReplyDeleteTo be welcome here, are we supposed to read every single blog post of yours back in to the mist of times?
Besides, who is forcing the experienced JC to patent?
Is it a crime to express one's opinion in this blog?
Another besides, who is discussing the patent affair?
I read JC saying he doesn’t intent to patent, then I read Trevor's post expressing his opinion, I agreed with Trevor's opinion and suggested JC to reconsider a patent before showing his wheel, I didn’t tell him: hey JC patent your wheel.
I did not discuss anything about patents.
So you don't have to tell me to leave the experienced JC to make his own decision when the time is right, because I have not forced or pressed JC to make a decision right now nor ever.
I respectfully suggest you to think a little bit more before you post.
HE WILL NEVER PUBLISH ANYTHING UNTIL HE GETS A WORKING WHEEL, OF COURSE, "NEVER" APPLIES TO THAT TOO.
ReplyDeleteLOL.
Anonymous, clever old man, I know you and will keep the secret of your identity for ever.
ReplyDeleteI know you too!
ReplyDeleteMedia coverage is controlled by OIL GANGSTER'S.
ReplyDeleteHurricane Katherine: media coverage 24/7
Haiti earthquake: same 24/7
Gulf of Mexico oil spill largest in USA HISTORY:
Where is CNN,GREENPEACE and etc.24/7 coverage?
They hate ORFFYREUS,gravity wheels,PM,free energy
etc.
Think again!...The whole world will not be knocking on J.C's. door because he will no longer have sole rights.This wheel is so easy to copy mechanically that the chinese will claim precedance and monopolise the market in no time. At least with a patent you can get finance and have a jump start before they have a chance. I wanted finance for an invention and the first thing they asked me was,did I have a patent.When I said no,that was the end of the meeting.
ReplyDeleteIt doesn't matter how many people copy the wheel AFTER John has revealed it - we are not living fifty years ago - John can put up a video of himself on Youtube and it will go viral within hours, and millions of people will see it, nad know that he is the inventor/discoverer/rediscoverer of it.
ReplyDeleteYour invention presumably wasn't quite as earth shattering as Bessler's wheel, Trevor.
Seeing as John's wheel will be everywhere soon after he reveals it (because everybody will be building their own) he will be an international star - nobody else can possibly claim to have thought of it first.
It's NEWS that the media want, and they certainly aren't going to have much of a story if they go and interview somebody in China who is knocking out copies of John's wheel - the public won't be interested in that, they will want to see the inventor, and that is where he can make his money.
It was already in the record, DrWhat.
ReplyDeleteI can't wait to see if john actualy says he will do what he said he would. I really hope John you will publish details even if it doesn't work instead of defaulting to, hmmm I'm gonna stay silent some more cause there's another idea I want to try.
ReplyDeleteCan't really blame you for thinking that way anon - I do keep on trying to solve this problem, but I guess the time has come to call it a day and spill the beans!
ReplyDeleteJC
I hope my input has the effect of stimulating more lively dialog because I too need a sounding board in order to arrive at a course of action should I be the one to succeeed. It's a bit of a delema because I hate corrupt freeloaders.
ReplyDeleteTrevor...sorry for this, but we all have the tendency to count the chickens even before the eggs have hatched..
ReplyDeleteThe very sight of success should glorify the inventor..he should become very compassionate and think of others’ good..
I have already mentioned that this invention is such that without God's will it will not happen..if the inventor is too commercial minded he is not going to find success. What about bessler's soul..is it not going to succeed. Who could that be..bessler left some clues for himself for his later birth..
So, I reiterate that let us not be hasty in coming to any conclusions before someone actually builds the wheel..
First of all, we should fully accept that bessler had actually built this wheel.. so many have tried before and so many are trying still..it doesn't look very promising yet..
Don't mind me,I have been dispised all my life because I am too optimistic. I see no obsticales when challenged and believe that nothing is impossible.Believe me when I say that I have never doubted Bessler's story and my first objective was to vindicate him and John Collins. As for the wheel,I am so close I can smell success.
ReplyDeleteWe live in interesting times! Good luck John, you are SO close! And Trevor, good luck to you too. Great work you guys.
ReplyDeleteSo if it doesn't work you will publish, if it doesn't work due to bad building you will publish, if it works you will publish, if it barely works due to bad building you will publish?
ReplyDeleteDo I have got them all or am I missing something.
Andre said: "Good luck John, you are SO close!"
ReplyDeleteHow do you know? Have you any idea how many hundreds of people have thought they had the solution to Bessler's wheel, but it turned out that it didn't work?
I BET HE WON'T TELL EVERYTHING. JUST ENOUGH TO STIMULATE A LOT OF SUGGESTIONS TO HELP HIM OUT. IT WILL BE LIKE CASTING CORNCOBS BEFORE SWINE. AND YOU WILL SNARF UP HIS B.S. AND CRAP OUT SUGGESTION AFTER SUGGESTION. MARK MY WORD.
ReplyDeleteA You Tube video of PM wheel going viral? The first response on the video will be "ANOTHER FRAUD" as are the comments on every other PM and OU video.
ReplyDeleteGood luck John
"A You Tube video of PM wheel going viral? The first response on the video will be "ANOTHER FRAUD" as are the comments on every other PM and OU video."
ReplyDeletePerhaps you can show us ONE Youtube PM video that shows us the inside of the mechanism, and has no external power source...
Nice try though.
One day left, John won't release anything, because it won't work...
Get the bloody wheel first,worry about the rest
ReplyDeletelater.