Wednesday, 13 December 2023

Gravity is the Originator of Rotation in Bessler’s Wheel.

It still surprises me that some people dismiss the possibility of gravity being the chief originator of movement in Johann Bessler’s wheel. Gravity enables a Bessler-wheel to rotate by causing the weights to fall in a particular configuration.  One requirement is that the weights land in a way that generates a limited amount of rotation in the wheel.  The second requirement is that the weights can be lifted back to their pre-fall position in time to fall again, with a lot less energy than was generated by their fall.

Yes we are told that it’s impossible for two reasons.  One is that gravity is not a source of energy and therefore cannot be used to drive the wheel and secondly once the weights have fallen it would take extra energy to lift them back up again, there being less energy available.  But according to Bessler he was able to lift the weights back up using less energy than was produced by their fall.  This unused energy was available to accelerate the wheel a little, in the following rotation.

Gravity may not be defined as an energy source but it makes items of mass move downwards or fall and that is an action that we can make use of. The second requirement is necessary because without it there can be no continuous rotation. Just because we don’t know how to design a method that would allow the weights to lifted back up at a lesser cost in energy, does not mean it can’t be done.

Other energy sources have been proposed over many decades, but none can produce the same results as Bessler’s wheel did, and without revealing the source of the energy they used.

Bessler stated in Das Triumphirende…, “NO, these weights are themselves the PM device, the ‘essential constituent parts’ which must of necessity continue to exercise their motive force (derived from the PM principle) indefinitely – so long as they keep away from the centre of gravity.”  So we can have no doubt that the weights are indeed the cause of the PM.  What is left?  Nothing but the force of gravity.

Bessler said he had solved that problem.  We believe he was genuine, therefore lifting the weights to the necessary height can be done for less cost in energy and we can find the way he did that too. I believe I know how it was done and soon I’ll know if I’m right and so will you.

JC


Tuesday, 5 December 2023

The True Story of Johann Bessler and His Perpetual Motion.

 On 6th June, 1712, in Germany, Johann Bessler (also known by his pseudonym, Orffyreus) announced that after many years of failure, he had succeeded in designing and building a perpetual motion machine. For more than fourteen years he exhibited his machine and allowed people to thoroughly examine the outside of it, but it’s internal workings were kept hidden. This was because the inventor feared that his design would be copied and someone else might obtain credit for all his years of hard work looking for the solution. He followed the advice from the famous scientist, Gottfried Leibniz, who was able to examine the device, and recommended a number of demonstrations and tests designed to prove the validity of his machine without giving away the secret of its design.

Karl the Landgrave of Hesse permitted Bessler to live, work and exhibit his machine at the prince's castle of Weissenstein. Karl was a man of unimpeachable reputation and he insisted on being allowed to verify the inventor's claims before he allowed Bessler to take up residence. This the inventor reluctantly agreed to and once he had examined the machine to his own satisfaction Karl authorised the publication of his approval of the machine. For several years Bessler was visited by numerous people of varying status, scientists, ministers and royalty. Several official examinations were carried out and each time the examiners concluded that the inventor's claims were genuine.

Over a number of years Karl aged and it was decided that after so long it was time the inventor left the castle and he was granted accommodation in the nearby town of Karlshafen. Despite the strong circumstantial evidence that his machine was genuine, Bessler failed to secure a sale and after more than thirty years he died in poverty. His death came after he fell from a windmill he had been commissioned to build. The windmill was an interesting design using a vertical axle which allowed it to benefit from winds from any directions. 

He had asked for a huge sum of money for the secret of his perpetual motion machine, £20,000 which was an amount thought only affordable by kings and princes, and although many were interested, none were prepared to agree to the terms of the deal. Bessler required that he be given the money before the buyer was allowed to view the internal workings of the machine. But those who sought to purchase the wheel, for that was the form the machine took, insisted that they see the secret mechanism before they parted with the money. Bessler feared that once the design was known the buyers could simply walk away knowing how to build his machine and he would get nothing for his trouble. 

I became curious about the legend of Bessler’s Wheel, while still in my teens, and have spent most of my life researching the life of Johann Bessler (I’m now 78). I obtained copies of all his books and had them translated into English and self-published them, in the hope that either myself or someone else might solve the secret and present it to the world in this time of pollution, global warming and increasingly limited energy resources.

Not long after I was able to read the English translations of his books, I realised that Bessler had embedded a number of clues in his books. These took the form of hints in the text, but also in a number of drawings he published and I found suggestions by the author that studying his books would reveal enough information about his wheel,to allow “someone with an acute and discerning mind, to build one”.

For some ideas about Bessler’s code why not visit my web sites at 

Take a look at my work on his “Declaration of Faith” at 

Also please view my video at 

It gives a brief account both the legend and some more detail about some of the codes.

The problem of obtaining a fair reward for all his hard work was anticipated by Bessler and he took extraordinary measures to ensure that his secret was safe, but he encoded all the information needed to reconstruct the machine in a small number of books that he published. He implied that he was prepared to die without selling the secret and that he believed that posthumous acknowledgement was preferable to being robbed of his secret while he yet lived.


It has recently become clear that Bessler had a huge knowledge of the history of codes and adopted several completely different ones to disguise information within his publications. I have made considerable advances in deciphering his codes and I am confident that I have the complete design.


Johann Bessler published three books, and digital copies of these with English translations may be obtained from the links to the right of this blog. In addition there is a copy of his unpublished document containing some 141 drawings - and also my own account of Bessler’s life is also available from the links. It is called "Perpetual Motion; An Ancient Mystery Solved?" 

This biography contains a wealth of information about Bessler himself, as well as many quotes by Bessler and letters to him or about him from many interested parties. It tells of his life up to and including his years with Karl the Landgrave of Hesse Kassel, and what happened to him later.

Bessler's three published books are entitled "Grundlicher Bericht""Apologia Poetica” and "Das Triumphirende...".

I have called Bessler's collection of 141 drawings “Maschinen Tractate”, but it was originally found in the form of a number of loosely collected drawings of perpetual motion designs. Many of these have handwritten notes attached and I have published the best English translation of them that I was able to get. Bessler never published these drawings but clearly intended to use them in his planned school for apprentices.

You can order copies of the books from my website at 

Printed books direct from the printer can be obtained from here

Or from the top of the right side panel under the heading ‘Bessler’s Books’.
There are also links lower down on the right side panel.

These books contain the most important information available if you seek to find the solution to Bessler’s wheel.

JC

Friday, 1 December 2023

Update for Christmas and Onwards to Next Year

So the end of the year approaches and I’m still building my Bessler-Collins wheel. I’m trying to finish it before New Years Eve, but if I don’t finish it by then I will still publish everything anyway, and continue with my build. 

As I’ve said before, and others have too, nothing proves the concept/design/configuration better than a working model, so even if the design is being simmed, I’ll continue with my project.

I’m not good at producing images so the explanation will be a mix of text and images. I’ll try to keep it short and as simple as I can.  I won’t take up too much space explaining where I found the clues and how I arrived at the interpretation, much of it will be fairly obvious.

The main thing is that once anyone understands the concept, it probably won’t need much further explanation.

A detailed explanation of all the clues I used is being written but that will take much longer to become available.  Bessler had no way of knowing which, if any, of his clues would be identified and interpreted or deciphered, so he doubled up on lots of clues, distributing them here, there and everywhere in text and drawings.  Some clues had two ways of deciphering them, and if they came up with the same answer that was a good result. There are literally dozens of them and that does not include the huge database containing 141 Bible references which I have barely skimmed - and although I can prove it contains coded information, I haven’t succeeded in deciphering it. I calculate that there are potentially in that chapter between 1000 and 1500 characters or words to find and decipher.

Bessler’s wheel concept is easier to understand than to build, for me anyway, but I suspect that more than a few people will accomplish a working model more quickly than I and it will look much better than mine. The skills and tools I used to have are considerably diminished but hopefully I’ve got enough left to make this model.  If not then I just hope the sims will inspire enough people to build an actual working model. 

This is a very busy time for me, not just because I’m building a model and writing up both a simple description for posting after Christmas, as well as the long term version for a later time, but I’ll also be travelling north before Christmas to stay near my granddaughter Amy and her parents over Christmas, and it’s normally a three and a half hour drive, but it being this time of the year, I reckon it could take longer.  I’m also on shopping duty!

Also, you may remember my granddaughter Amy Pohl is a TikTok and YouTube influencer with over 3.7 million followers. I fear I shall be dragooned into another of her infamous videos, along with the rest of the family.  So embarrassing!

I’m very excited and at the same time apprehensive about my big reveal!  I anticipate a kind of stunned reaction, when people see how simple the solution is.  I just hope I’m right!

JC

Monday, 27 November 2023

What Goes Around, Comes Around……Again and Again!

I’m aware that some people, (maybe more than some!) are disappointed by my ‘sharing information’ posts because they say that it’s all stuff I’ve shared before, but I don’t want to post anything which will give away the design I’m working on just now.  

As you’ll see from this post I’m reminding myself of some of the things I’ve shared, and I can tell you that there are some blogs which give a great deal of really useful information.  At the time I wrote them, I regretted writing so much, but as is often the case no one picked up on what I’d said and it was all dismissed as my ‘usual speculation’, and best dismissed or ignored. Having said that I note that in 2019 I wrote, 

Following a fair criticism in comments, I have taken on board the suggestion that I should at least have given away some of the clues I used to discover Bessler’s design for his wheel. I have posted several clues over a number of years but for those who missed them, here are some of the ones previously identified plus some I didn’t mention.  These are not necessarily in order.”

So still not revealing enough apparently!  Still, at the end of this year you will know most of what I think I know about how Bessler’s wheel worked.  I’d like to finish a working model before I publish what I know, because experience warns me  that without one, no one will take any notice again, and just dismiss it as speculation.

I recently noted that some of the subjects of my old posts, both here and on the Besslerwheel forum, pop up from time to time there.   I realise that there must be a lot of people currently exploring this subject who have not looked into old posts in either or both sources for obvious reasons.

Firstly, if they’re new to this subject, they think that only recent posts may have useful information in them and therefore there is no point in studying old posts.  Also maybe they don’t have the time to plough through huge numbers of posts without knowing exactly what to search for, or they can’t be bothered, and I don’t blame them for that.

A quick look at the stats on this blog shows I have posted 798 pages, which received 29,915 comments and 1,786,619 visits.  That’s a lot of words to search, so I thought I’d suggest some searches.

The number ‘5’ is my favourite and it goes all the way back to 2010, and is frequently discussed over the years.  ‘Pentagram’ too is a frequent presence on this blog. ‘Kiiking’ a subject which I introduced here and in the BW Forum and has been taken up in numerous other places.  ‘Parametric Oscillation’ is another old favourite, which I first discussed with the famous parapsychologist and electrical engineer, professor Hal Puthoff way back in 2004; and ‘drawings’ is another.

There are so many interesting subjects covered both here and at the BWForum, that I couldn’t do justice to them all, so if and when I think of them I may offer further searches.  

JC

The Toys Page or MT 138,139,140 and 141

  As was pointed out in the BWForum, some pages were removed from the original MT and replaced by what I termed some 30 years ago the “Toys”...