It's my birthday - 67!

I'm 67 today!  I have decided that if I havn't made a working model of Bessler's wheel by the 6th June this year I'll give up trying to build one, and concentrate on finally writing and finishing the follow-up book to the first one which I wrote and published in 1997 - "Perpetual motion - An Ancient Mystery solved?"

I have started and restarted it several times but I kept receiving more information which I tried to include but which didn't really fit in with the lay-out of the first book.  So I am starting again and I'm just going to tell it in chronological order and try to get a published to take it on. I realise that I gave up much to soon in trying to get the first book published.

Louis L’Amour received 200 rejections before Bantam took a chance on him. He is now their best ever selling Author with 330 million sales.

"Too different from other juveniles on the market to warrant its selling." A rejection letter sent to Dr Seuss. 300 million sales and the 9th best-selling fiction Author of all time.

"You have no business being a writer and should give up." Zane Grey ignores the advice. His 90 books have now sold 250 million copies.

The Tale of Peter Rabbit by Beatrix Potter was rejected so many times she had to initially self publish. To date: 80 million sales.

"It is so badly written." The Author tries Doubleday instead and his little book makes an impression. The Da Vinci Code sells 80 million.

140 rejections stating "Anthologies don’t sell" until Chicken Soup for the Soul by Jack Canfield & Mark Victor Hansen sells 80 million copies.

Having sold only 800 copies on its limited first release, the Author finds a new Publisher and The Alchemist by Paulo Coelho sells 75 million.

"We feel that we don’t know the central character well enough." The author does a rewrite and his protagonist becomes an icon for a generation as The Catcher In The Rye sells 65 million.

5 Publishers reject L.M. Montgomery's debut novel. L.C. Page & Company does not, and Anne of Green Gables sells 50 million.

"Nobody will want to read a book about a seagull." Richard Bach's Jonathan Livingston Seagull went on to sell 44 million copies.

"Undisciplined, rambling and thoroughly amateurish writer." But Jacqueline Susann refuses to give up and her book the Valley of the Dolls sells 30 million.

Margaret Mitchell gets 38 rejections from publishers before finding one to publish her novel Gone With The Wind. Sold 30 million.

I could go on, but the lesson to be learned in publishing is never give up - and I won't!

After that date I shall publish on my web sites and here everything I have worked out regarding the way Bessler's wheel worked and why.

JC

Hypothesis first, then mechanism design

I may be misreading the situation but it seems to me that many people attempting to find a solution to Bessler's wheel are designing new ways of achieving this and they do not realise they are effectively running on the spot,  and I'm not necessarily referring to those who attend this blog but in general.

I read that simulation software is useful because one can test many variations of designs and save hundreds of workshop hours.  While I don't doubt that these variations can be tested quickly and accurately, I think my point is being missed.  I spoke of variations in the design of various parts which occur to you when you are handling the mechanisms, where as the variations being tested in the simulation program really only apply to the changes available to you such as altering the placing of weights, pivot points or dimensions of the parts - it does not mean that the variations being tested in the software will cause an entirely new design to spring to mind just by looking at their animations.

When you have the physical parts in front of you and they don't work, you can see by means of an ability we all have - common sense -  why something doesn't work.  There is no need to run dozens of variations through the simulator when your common sense shows you why it doesn't work, and why no amount of variation in the dimensions or placings of critical parts will improve the outcome.

I often write that I have found and understand the basic concept which drives the gravitywheel, but actually that is too broad a definition.  The basic concept is the actual idea that gravity can drive a wheel continuously through action upon its weights.  All of us who believe this is possible, understand that concept.  So the extra thing that I understand is more than the basic concept.  I understand how it is possible, why it does not conflict with any of the accepted laws of physics, and what the mechanism must do. The key to success for me lies in designing a mechanism that works according to my hypothesis.

So we are looking for a hypothesis initially which will fit within current laws of physics and then all we have to do is design a mechanism which will operate within those laws and fulfil the hypothesis we have thought of. 

So to return to my first point, you must create a hypothesis to explain how the wheel could work and then you can design a mechanism which works according your hypothesis.

JC

Some advice, worth repeating in my opinion - Don't simulate - fabricate!

I know I've mentioned this before here, but from time to time, both by email and through the blog, I'm urged by well-meaning people to test my designs with simulation software, and my response has always been the same; I have tried simulations and I don't get the feedback from it that I do when I build a model, so I don't use them.  For me, there is no substitute for holding the pieces of a mechanism in my hands and, when I find that it isn't working, playing around with it and making all sorts of interesting and new (to me) discoveries.  I enjoyed that experience earlier this January and made, what I think is a momentous discovery and suddenly the so-called 'connectedness principle' was laid bare before me and I understood exactly what Bessler meant.

I am fully aware that there are several people who are equally sure they too understand it, and maybe they do; perhaps we have all made the same discovery... and maybe not.  I would never have made this short leap of understanding using simulation software because I would never have thought of moving the parts in the way I did, and even if I had, I doubt that I would have bothered to go to the trouble of entering that particular variation into the program - and there wasn't just the one variation I tried, but several different ones - who is to say which, if any, I would have tried out in the simulator?  The truth is that you can test variations so much quicker on the work bench than at a computer - and you know that what you are seeing is real and not subject to some bug within the program. Other aspects of the design now find an echo in several different drawings from Bessler and some loose ends have been tied up.

If you have never tried making models to test your design, please try it.  There are many impressive models shown on the besslerwheel forum and I am envious of the skills displayed by their makers but in all honesty there is no need to spend much money to test a hypothesis.  I have often made test mechanisms out of cheap materials such as cardboard, ice-lolly sticks, string, glue, plastic plates, drinking straws, lead weights for curtains and even blutack.  If the test answers the question then you can make something you wouldn't be ashamed of displaying!

I have no idea how many models I've made and if I knew, would I have counted separately all the variations on one design I'd tried?  Bessler suggested he'd made hundreds and I'm sure he did if you include the variations he tried. I would say the same thing - hundreds.

So my advice is, don't depend on just testing the ideas out on simulation programs because you may miss a vital clue if you don't build a model.   I'm sure that the successful machine will be designed by someone who is building models and not by someone who relies on simulation software.

JC

The Italian Orffyreus documentary and the Pentalpha.

RAI, the Italian state owned public service broadcaster who commissioned the "Orffyreus" documentary, have said that FarmStudios cannot send me a DVD of the finished documentary as they don't want anyone outside of production to see it before it's aired, which is fair enough in my opinion. But it does mean that I won't be able to offer copies to anyone for the time being.  Of course should pirated copies appear at some point in the future, then there is nothing one can do about that.  I am to be given a preview in the next few days, so I'll report about it as and when I can.

My current position with the Bessler build is stationary, like the wheels I've built so far!  I've got the flu.  I have a plan mapped out for when I can get back to work and it is looking promising - how many times have I heard myself say that before?  I am still working with the same basic concept which I worked out some eighteen months ago and I'm still convinced that it is the way to go.  It answers all the questions raised and I'm confident it will work.  The mechanisms are complex in a way that would not be obvious to a spectator, such as Karl.  I can see why he described them as simple.  It's one thing to see the finished article and how it works - but quite another to work out how to get it to do what you want it to do, when you don't know the exact design or the dimensions.

In answer to my previous post about the pentagrams and the number 5s, in Bessler's works, I've come to the conclusion he was trying to point us to the alternative word for pentagram, reputedly used by the Pythagorians, which was pentalpha.  Some people think of the pentagram as three interlaced triangles, but others describe it as having five upper case interlocking letter As, and that seem to me to be the more in line with Bessler's thinking. We have seen the interest in the besslerwheel forum in the famous 'A with legs': THE primemover? thread and this supports the idea.

It is well-known that Bessler used alternating letter As throughout his "Maschinen Tractate", sometimes with a straight cross-bar and sometimes with a bent one. He did not do this for any other reason than to point to its importance. I'm sure that this simple lever design is incorporated within the mechanism, and the successful design will require it.  

JC

That ubiquitous number five again, the Freemasons, Alchemy and Hermeticism!

As we all know, one thing that Bessler's codes has thrown up is the frequent appearance of 5, 55 and 555.  I have suggested that it either points to chapter 55 of Johann Bessler's Apologia Poetica - and/or it is a hint that five mechanisms are needed in each direction for the bi-directional wheel.  But nothing is certain and I would not wish to become so dogmatic that I miss an alternative meaning.

I would be the first to admit that the evidence that there were five mechanisms is non-existent, and if I'm wrong, then one must assume that the large number of coded number 5s only points to Chapter 55 in Apologia.  If it is connected with the presence of a coded message hidden in chapter 55 of Apologia Poetica, the evidence for which is undeniable, why did he choose the number 55? Was it chance?  I think the presence of hidden pentagrams, hinting at the same number in all the drawings in other books rules out chance.  He left so many other pointers to that Chapter, within the Apologia, not forgetting the strange list of 141 bible references, that the pentagrams seem to be superfluous.
 
In support of the idea that the chapter number 55 was not the only reason for the presence of the pentagrams, remember that none of the drawings containing the pentagrams appear in Apologia Poetica but rather, in the later publication Das Triumphirende, which came out four years later in a much more professional publication.  if they were pointing to the chapter 55 in Apologia Poetica one would think there would have been included, some kind of link to that former publication, or did he think people would remember the earlier one and make the connection themselves?  Very doubtful, and probably most people would not have even heard of the Apologia, since Bessler had only just started on his journey when it was published.

So the choice to use chapter 55 was deliberate, not chance; the pentagrams while pointing to the chapter 55 are not necessarily exclusively for that purpose, and the need for five mechanisms is not proven.  We are left with the mystery of why 55 and what does it mean?

I did a little surfing on the matter. A random query into google led me to the Washington Monument and its extraordinary measurements.  Now there are a considerable amount of spurious facts attached to this structure and it is hard to distil the truth from them but this is what I believe is correct.

Several heights have been specified, in the past, but the consensus seems to be 555 and half feet and one eighth of an inch.  Let us suppose that the intended height of the Washington monument was meant to be 555.5 feet above ground - that is equal to exactly 6666 inches.  A nice round figure and far more likely to be the right number than some figure plus an 1/8 th of an inch as is suggested.  Mind you, there are reports that the aluminium capstone on top of the pillar has been struck so many times by lightning that it has lost just under half an inch in height which, if we include the important eighth of an inch, would give a height of 555.55 feet!  And that would give us 6666.6 inches!

At ground level the sides are 55.5 feet (666 inches) long.  Ok so there appears to be an obsession with the number 5 (or its inch equivalent, 6) - but why? I'm well aware of the 5's ubiquitous  associations with alchemy, hermeticism, the Kabbala and freemasonry, and in particular the frequent association of the Washington Monument with the Freemasons....but not why that particular number! Yes there are numerous references to the number in freemasonry etc, but no one has come up with any good reason as far as I can tell why the number 5 is so important to them.  The pentagram is the most obvious geometric figure associated with the number five and that seems to have been in Bessler's mind too.  It has links with the planet Venus because the path is (very) roughly pentagonal...so what?  The skull, book and jar in Bessler's portrait also have links to Venus in symbolic art....and to Mary Magdalen...and she too has links to Venus!  We're going around in circles here (sorry!) and perhaps that was intentional. But why five?  What was it that Bessler was hinting at?  If we really knew why the freemasons were so captivated by the number 5, 55 or 555 etc, maybe we could get a glimpse of what Bessler was trying to tell us.

These different features of Bessler's books - the skull, jar and book, the hidden pentagrams, the various encoded 5s - all seem to point towards some kind of arcane belief system, but what it is, I don't know.

I have searched and searched for years and there is nothing of practical use for our purposes to be found in the inclusion of the the number 5, so the 5s are hinting at something else.  But what?

If anyone has any ideas about why Bessler included the number 5s I'd be pleased to know.  I understand, technoguy, your conviction that the design incorporates a pentagram within it - and you may be right, but I don't rule out anything else.

JC

The Orffyreus Code - were others aware of it in the 18th Century?

I passed on my copy of Bessler's 'Das Triumphirende' to a fellow Bessler admirer, David, with some regret, but pleased that he also has an interest in this particular copy. Inside the frontispiece is a label which reveals that the book came from the library of Emmy Destinn, a world famous Czech opera singer (1878 - 1930). Destinn's close links with the Royal Opera House, Covent Garden in London are shared by David, a fine violinist with the same company.

Destinn's talents were many and varied - and not only musical. She also wrote plays, novels, short stories, librettos, and poetry; painted on canvas and porcelain; and translated and composed songs. She wrote her first play at the age of 16, and by 18 had followed that with three more. She spoke five languages fluently and wrote her literary work in Czech and German. But David had the same questions as I had - how did she come to own this particular book?

It seems that at the peak of her career she bought the beautiful castle at Stráž nad Nežárkou in Southern Bohemia. Since she moved in, in 1914, Destinn furnished the castle with a great collection of art, antiques and books on all subjects, bought while touring the world. One might be tempted to think that she acquired a copy of Das Tri during her travels, but in my opinion it is more likely to have been collected by the previous owner, Baron Adolf Franz Leonhardi, a man with a keen interest in the occult who held a number of seances at the castle. He accumulated a huge library of esoteric books, many on the subject of hermeticism and alchemy as well as freemasonry.

If the book was acquired by Leonhardi then it may be that he was aware of certain traditions attached to Bessler's books. I have never accepted that I was the first and only person to discover the existence of the pentagrams and hence the other coded items included in the books. If others were aware of secrets within the books and made their own interpretations of the mysterious features of the double portraits, for instance, then they may have recorded their findings somewhere or corresponded with others to share their knowledge. In some archive, museum or private collection there may well be a record of these findings.

It's fun to speculate but I don't want to start down the slippery slope of conjecture - and without evidence there is nothing to base an opinion on. I merely pass on my thoughts for entertainment purposes!

JC

Unable open or edit blog in Internet Explorer thank google - for nothing!

I am unable to read comments in Internet Explorer (IE) because google chrome have made alterations to the blog.  I can still read them through firefox and, of course, chrome - but I don't like chrome because I can't have my norton identity-safe toobar.  I'm not used to firefox although I could do I suppose.

I have opened up another blog at  http://besslerswheel.wordpress.com/ but I'm not sure whether to abandon this one or stay.  I can of course use chrome but I object to the way they've done this, and I am not alone.

Can people still comment here?  Try and let me know, should I stay or should I go?

JC

Remote Viewing, Psychometry and the 'sixth sense', as a way to get more information?

I have always tried to maintain an open mind to everything and yet I remain deeply sceptical of the possibility that one can retrieve information from a previous time by remote viewing (Rv). But there are certain aspects to an episode of Rv which was carried out on my behalf in 2008, which have left my wall of disbelief slightly dented. I can however provide a possible explanation for the particular report which does at least allow the retrieval of information by some as yet unknown mechanism, in real time - the notorious sixth sense?

Six remote viewers were set the task of attempting to 'see' what Bessler was doing on 6th June 1712. All they were required to do was try to retrieve something, anything, relating to Bessler, Gera, etc, but they were not actually given anything other than an eight-numbered file reference - no names, no dates,no places and no object information - no information at all. This was a highly professional set-up which it was hoped might offer some convincing evidence of its usefulness, so the strictest protocols were applied to the process.

The six reports which I read were disappointing to say the least. I saw nothing in them to grab hold of and I regretfully filed them and forgot about them. Recent discussions on the subject prompted me to read them again and I was astonished to discover one report which I had somehow overlooked. I was looking at this particular one and noticed for the first time that a simple drawing of a house looked a bit like one of my photos of Bessler's windmill. Adjacent to the drawing was a handwritten comment which said "somewhat ornate structure? Top is wrong!" My first thought was that Bessler never finished his windmill, but it was finished later as a simple building without the windmill superstructure. Perhaps the remote viewer had sensed the top was unfinished or altered. But the most extraordinary thing about the report was the prostrate figure lying on the ground at the foot of the house, with the words next to it, " trip - fall" and nearbye the word,"surprise!"

Could the R-viewer really have 'seen' Bessler's fall to his death?

Elsewhere there are several references to the letter "W" and words such as "w unbuckled" which could be interpreted as the letter 'w' split into two 'v's.  This, as many, who are aware of my work on the 'Orffyreus Code' know, is one of the most ubiquitous examples of his code.

The problem I have with this is that one cannot really go back in time, in my opinion, but one might be able to retrieve information from someone such as myself in real time. If the latter proposition is possible then we shall find nothing other than that which is in my head or someone else's. This is not to say that it is not an amazing feat and certainly it would prove useful for finding missing persons for instance, but it is doubtful that it will prove of any use to we who seek further information about Bessler.

There is one even remoter possibility that has been suggested to me in the past. Psychometry is the ability or art of divining information about people or events associated with an object solely by touching or being near to it. Wikipedia says that it is a form of extra-sensory perception characterized by the claimed ability to make relevant associations from an object of unknown history by making physical contact with that object. Supporters assert that an object may have an energy field that transfers knowledge regarding that object's history.

It was suggested that my copy of Das Tri might prove a suitable subject for this process, so I sought help in finding a recognised practitioner - I failed to find one who was prepared to do it for nothing other than one elderly gentlemean who unfortunately lived too far away for an appointment to be possible. I have since then passed my copy onto another more careful owner so I can no longer attempt to obtain information this way, but it still seems that if information can adhere to an object and that information be retrieved at a later date then all is not necessarily lost.

I have no opinion about the validity or otherwise of this subject but I can point to a fascinating study carried out in 2007 which appears to support the theory that objects can retain some kind of information which can be read by those with that particular ability. http://psychometry.psican.org/news.html does seem to give a balanced report on a unique experiment which supports the possibility. Given the probability that the mechanism involved in remote viewing and psychometry are probably closely related, I would imagine that the right person might be able to 'read' the information available in my old copy of "Das Tri"- and my other books - without actally being in its presence!

JC

An uncovered working wheel is easier to build.

When Johann Bessler exhibited his wheels, they were of a certain depth or thickness, being covered on both sides of the wheel. I assume that the cross-bars or pivots upon which the levers or weights turned, ran across the internal depth of the wheel and each end was fixed to a piece of timber on each side of the wheel. Witnesses report that the sides of the wheel were covered with oil cloth and others that there were gaps in some thin timber planks that covered it. This suggests that the wheels were built in a skeletal framework with easy access from both sides as well as the circumferential edge, then the interior was hidden by the oil cloth or the thin wood deals - not as in my prototypes which consist of a single wood disc mounted on a removable axle.

Its hard to explain without a drawing but its a simple to understand; I call Bessler's wheel a three dimensional build having depth as well as height and width. For simplicity, my prototypes are built in a two dimensional way having height and width but not really any depth. By that I mean that the same cross-bars or pivots I referred to above are only attached on one end, in my case, to a single side disc, or back-plate, thus dispensing with the need for any kind of structure on each side of the wheel and allowing easy access and adjustment.

From Bessler's perspective his wheel had to built as a framework of pieces of timber rather than two discs because of the increased complexity of fitting the cross-bars and any associated mechanisms, in-between two discs, but I'm sure his experimental models were built in a similar way to mine because at first he only needed to make a proof of principle wheel for his own satisfaction,  and then build something that would keep the internal mechanisms safe from prying eyes.

I had thought that if I was to succeed in making a working version I would need to either rebuild it with two solid discs, one for each side, to mount the mechanisms on, or try to attach to the open, uncovered side, some kind of covering to hide the internal workings. However when I decided that I wasn't going to keep the workings secret it was obvious that I could just go with the first working prototype. But now I'm aware of what a mess the basic disc I use to mount everything on is! Its got more holes in it than a hunk of Swiss cheese! The metal levers are similarly riddled with holes of assorted dimensions. What to do! In the end not much. I might apply a little paint to the disc to make the mechanisms show up against the background of the disc..... but I'm getting ahead of myself - first I have to build that working model!

JC