Do you show signs cognitive dissonance?

Yesterday at last, I managed to find some time to work on my project.  I am using my own interpretations of Bessler's clues, as will anyone who is trying to build Bessler's wheel, and those interpretations can be viewed as being highly subjective as opposed to objective.  By that I mean that these interpretations are in the end just an opinion whereas objective ideas are factual and provable.  But at some point my subjective opinions will become objective and true, I hope!  

Of course such opinions as I hold are biased because they are arrived at through a succession of revelations relating to the supposed clues I have found.  But because an objective piece of information needs to be factual and unbiased my view and the expression of my ideas can't be anything other than subjective.  So until I can either produce a working model or publish a complete explanation of my ideas, I can't give out any objective information until I've finished building my wheel.

Obviously I think I'm right or I wouldn't bother building the wheel, but discussing them here does not seem advisable as it would take too long to explain how I got to where I am. If I did try a shortened explanation it would miss the sequence of discoveries which confirm my interpretations are correct.  Some months ago I began to write a detailed document and I planned to put out a video with pictures and some filming to explain my reasoning, but sadly I haven't had time to continue with this but I shall get back to work on it as soon as possible.

As I have continued along this path I have discovered numerous additional clues which confirm what were previously just my interpretations of some clues.  When the full explanation comes out in due course I think people will amazed at the number of unarguable clues, found everywhere within his works, and I'm not only referring to the number 5.

An acquaintance who is a psychologist, told me that I exhibited typical signs of cognitive dissonance because on the one hand because I had been taught that gravitywheels were impossible and I believed it, but on the other hand I was trying to prove that they were possible and potentially valuable machines and this was causing me some conflict.  I had to look it up to understand what he was getting at.

Apparently if you hold two or more opposing ideas or beliefs it causes you discomfort.  Mountain climbers know the risk of death is ever present but they continue to climb; smokers continue to smoke even though they know it may kill them eventually.  To relieve the discomfort caused by these conflicting beliefs, we all attempt to reduce the dissonance by altering existing beliefs, adding new ones to create a consistent belief system, or alternatively by reducing the importance of any one of the dissonant elements.

That psychologist made me feel as if I was someone who suffered from some kind of weird rare psychological delusion and might be a step away from the madhouse!  But the fact of the matter is that I don't feel any discomfort with my apparently dissonant beliefs, so either I have succeeded in altering my existing beliefs or I've reduced their importance.  

I think the former has occurred, but it shows you what a load of old tosh these so-called experts spout from time to time. According to him we all show signs of cognitive dissonance! Of course there are some who think my attic's a little dusty....  

JC

10a2c5d26e15f6g7h10ik12l3m6n14o14r5s17tu6v5w4y4-3,’.

Priorities

Little comment has appeared regarding the string of letters and numbers after my posts but several emails have queried their point and some good guesses have been made, so I have decided to explain their purpose - and I suppose in a way this is another clue.

In a letter to Leibniz in 1677, to try to ensure his priority in his work on calculus, Sir Isaac Newton,wrote:- “I cannot proceed with the explanation of the fluxions now, I have preferred to conceal it thus: 6accdae13eff7i3l9n4o4qrr4s8t12vx”.

The string of letters and numbers shows how many times each letter appears, which produces an anagram and once rearranged gives:- “Data aequatione quotcunque fluentes quantitates involvente, fluxiones invenire: et vice versa.” meaning, “Given an equation involving any number of fluent quantities, to find the fluxions, and vice versa.”

In 1610 Galileo Galilei, the Italian astronomer believed he had discovered two moons orbiting another Saturn.  He published the following anagram to ensure his own priority,"smaismrmilmepoetaleumibunenugttauiras". When rearranged, Galileo's secret message was, 'Altissimum planetam tergeminum observavi', and translated reads,"I have observed the most distant planet to have a triple form", which related to his mistaking the rings around Saturn for moons. 

So... in order to try to establish my own priority in this matter, I have decided to post my own encoded information regarding something I discovered about eighteen months ago.  This discovery is not a theory but a well-established and easily demonstrated fact which I have tested to my own satisfaction. I have verified that Bessler himself used it in his machines and published encoded informaton about it.  I do not know if it is his 'connectedness principle' however, although it could be, but I have alternative possible candidate for that.

I did not make the discovery by deciphering Bessler's clues but purely by a combination of frustration and desperation at my lack of progress.  I am not claiming that this is an undiscovered concept so much as an overlooked one in this particular application.  The following code has been slightly modified from the previous ones but the resulting plaintext is identical:-

10a2c5d26e15f6g7h10ik12l3m6n14o14r5s17tu6v5w4y4-3,’.

JC

Any other applications for Bessler's wheel?

I suppose it's a bit premature to be considering such things but, there is a little negativity about how beneficial a working version of Bessler's wheel would be.  There is doubt about its capability to furnish an ordinary house with enough electricity to cover all its wants.  We won't know how practical that will be until we have a working one to play with, but there must be other uses which it would still be suitable for.  Here are some suggestions:-

Pumping water in arid areas where a low tech solution is needed.  Even without electricity, air conditioning might also be possible in hot climates, and commercial refrigeration and cold storage facilities seem obvious choices too.   Which leads on to my main point.  There must be other uses for the gravitywheel other than producing electricity for various uses. I wonder if it could be used to compress air?  Compressors are excellent alternatives to electricity for supplying energy to all manner of equipoment.

There may be a requirements for something to replace electricity either permanently or occasionally - something that used a relatively small amount of electricity but for extended periods of time - or moves very slowly and at length? 

Emergency lighting?  Conveyers? Irrigation? Ships? Trains? 

Any ideas or suggestions?

JC

10a2c5d26e15f6g7h10i1k12l3m6n14o14r5s17t1u6v5w4y4-3,1’1.

Maybe there weren't five mechanisms?

Bessler's clues, some of which I have indicated, both here and on my other websites, are not particularly open to accurate interpretation prior to one's gaining personal knowledge of the design of some features of the wheel.  This might indicate that his main purpose in leaving so many clues, was to give himself the opportunity at a later date, to point to them and explain them, in the event of a dispute about who discovered the secret of the gravitywheel first, thus proving his priority in the matter.

But even if this is so, it does not rule out the possibility that he intended someone to take the time to try and understand them, and his prescient comment about accepting post-humous fame if no sale was ever achieved in his lifetime, seems to support this conjecture. 

One of the things I have found recently, is that the discovery of a particular feature of the design that I suddenly comprehend with my own prototype build, that looks as though it might prove extremely useful, often finds support in a previously misunderstood clue of Bessler's.

I now have to admit that I might be wrong about my predilection for assuming that Bessler's wheel had five mechanisms.  A discovery only yesterday has thrown my mind into confusion because I believe I have stumbled upon the real reason for the ubiquity of the number five clues.  This does not necessarily negate my previous stance in believing that five mechanisms were a vital ingredient, but it does throw the whole issue into doubt.

JC

10a2c5d26e15f6g7h10i1k12l3m6n14o14r5s17t1u6v5w4y4-3,1’1.

My Wheel Update

I've managed to find time to restart work on my own version of Bessler's wheel.  I say my version, but if it works it will clearly be recognisable as having been derived from Bessler's clues, many of which I think you are all unaware of, as I haven't shared everything to date - unless some of you are working on the same clues in secret!

There are five mechanisms each consisting of two equal weights and some levers.  There are no cords or springs, just levers and weights.   

The design still relies on the concept of parametric oscillation and I cannot see any alternative if you accept that gravity alone drove Bessler's wheel. I specifically chose the Estonian sport of 'Kiiking' to demonstrate exactly how parametric oscillation works and it's really very simple.

A parameter is a quantity or mathematical variable that stays constant.  So if you have an oscillator such as a swing with fixed lengths it will swing to and fro until it stops, because all the parameters such as length, weight and gravity remain constant.  But if you alter the parameters at each swing stroke, as a child does on a swing by swinging its legs at the appropriate point, you continue the swinging motion. 

To obtain a variable in the parameters of kiiking, theoretically the person swinging has to raise his weight at two points during each revolution - and the same goes for the gravitywheel.  However in practice only one lift is required and the return of the person's mass to its former position in readiness for raising it again, can take place with the aid of gravity as long as it occurs in good time time for the subsequent lift.

There is an extra factor or concept which I discovered about 18 months ago, which overcomes the objections to a gravity-only wheel, but I don't want to share it yet.  Suffice to say that it throws out the window all the arguments about the viability of such devices.  

JC

If at first you don't succeed....try, try, try again

Recent poems posted here prompted me to write something last night.  I write them for myself usually, although there is one of my earlier efforts at the beginning of my Bessler biogrpahy, 'Perpetual Motion; An Ancient Mystery Solved?' - and it's also on my web site at http://www.free-energy.co.uk/html/my_poem.html

Here it is:-

You think you've found the right solution

To continuous revolution,

Without the need for energy,

except of course for gravity.

It's common to the likes of us

Who like to think Orffyreus

Was genuine, and not a crook

Who fooled us all with gobbledygook.

But we get fooled ourselves you see,

When ideas, new, convince us we,

Have found the secret to the wheel.

We tell the world we will reveal,

The details of our cherished notion

That we found perpetual motion - 

But then we find we were deceived

And it was wrong which we believed.

The wheel stayed still, it didn't turn

We smash it up and let it burn.

But soon we're back with a new concept,

The disappointed tears we wept

Forgotten in the blinding light

Of revelation in the night.

This time for sure the wheel will spin

Endlessly - but who will win?

JC

The weights on Bessler's wheel describe a path similar to the letter 'R'.

I noted a comment on the besslerwheel forum by jim_mich, while I was away in Spain, that I had at one time espoused a belief that the movement of the weights in Bessler's wheel followed the path shown in the avatar, I use on the forum, the Yin Yang symbol.  I used to think the weights moved on a path similar to the double curve which runs across the middle of the circle.  It's true that I did cherish this idea for a time and indeed I discussed it in my book 'Perpetual Motion; An Ancient Mystery Solved'.  But I came to the same conclusion that Jim did, that there was no way to incorporate such a design within any of the wheels I was working on, and I no longer subscribe to this idea and have not done so for some time because conflicting evidence appeared to suggest another design altogether.

People must be aware of other 'coded' information I have discussed and in particular the alphabetic substition of Bessler's name and his adoption of two extra forenames.  (see www.theorffyreuscode.com) He was born Elias Bessler and added the Johann Ernst at some point before he became famous, so that E. Bessler became JEE Bessler.  Given the alphabetic substitution to turn Bessler into Orffyre and thence to Orffyreus, I pointed out that JEE became WRR. 

Now I could understand the doubling of the letter 'E', given his (and mine!) obsession with the number five and 'E' being the fifth letter to give two fives - and I could also appreciate the inclusion of the 'W' in the subsequent alphabetic substitution, which also provided two fives in the form of double 'V' - but before the alphabetic substitutions of 'W' he had an apparently meaningless 'J' and after the alphabetic substitution he had an equally meaningless 'R'.  To what purpose could these two letters of doubtful value be attributed?

I assumed that he simply fancied the name Johann and with alphabetic substitution, the inital letter gave him the useful 'W', and the equally valuable 'E' gave him the 'R' and that, it seems to me must have been of equal importance since he incorporated it in every logo he signed all his letters with .  I reproduce two examples of the logo below so that you can see it.  I am convinced that the letter 'R' mimics the paths of the weights but it has to be interpreted correctly, which I believe I have done.  So there is your clue for today.

JC

It's five mechanisms, not four or eight.

I discussed the importance of the number 5 to Bessler, here last year (see my web sites at http://www.besslerswheel.com/  and http://www.theorffyreuscode.com/ )  In my opinion there is so much information to be had from Bessler's books that just stress the importance of this number that I fail to see how anyone can argue with the obvious fact that Bessler intended to convey something of importance to do with the number 5.  I am therefore astounded to be told from time to time that I have imagined all of it, or that I who has become obsessed wit it!  

The only thing we don't know for sure is why.  Well I do, but until I finish my wheel I cannot prove it, but I have worked out why it is necessary to have five mechanisms and why equal numbers of mechanisms won't work, at least not with this design.  

Fischer von Erlach described hearing the sound of 'about eight weights landing gently', etc.Why was he not sure about the number of weights he heard?  He was a widely respected and talented architect and engineer and seems to have tried to carry out a thorough examination of the wheel, yet he had some doubt about how many weights he could hear. 

Let us suppose that Bessler covered a weight in one mechanism with sound-deadening material - he mentioned that he used felt in an earlier wheel - so the other weights made a heavy knock as they landed, but the remaining weight made some kind of soft thud or perhaps it landed silently on a spring and made no noise at all. Did Erlach hear another sound but as it wasn't the same as the others, he attributed it to some other action and therefore concluded that there were about eight weights, whereas I argue that there were ten - five for each direction the wheel rotated.  The only suspicion he might have had was that there was a gap in the regular rhythm  of sounds he heard, but when you take into account the sounds he must have heard from the reversing mechanism which might not have been evenly synchronised with the forward moving ones you can see how he might have had doubts.

So guys, forget the eight weights or the four weights, it's five for each direction - and they operate in pairs.

JC

A belated expression of thanks to my first customers - and on with the show!

I've been looking for some old stamps for my grandaughter who has decided to start collecting them and I came across a huge bundle of envelopes I received from people all over the world when I first published my book. I have almost 400 stamps from so many different countries.

I'm amazed at how many I have and I think I should belatedly publish a word of thanks to all those people who took a chance on sending me a cheque to buy my book.  There was no PayPal nor anything similar back in 1997 and it must have seemed a risky purchase to send a cheque from one side of the world to the other.  The cheques themselves took six weeks to clear if they were in any denomination other than Pounds Sterling, which most of them were, but I couldn't leave people waiting all that time so I just sent the books and hoped the cheques would clear.  They all did and for that I'm extremely grateful.  

So I'd like to offer a belated thank you to all those people who risked a sum of money, with very little information about myself.  I guess we have grown older and wiser since then and are  much more aware and wary of internet scams than we were back then.  The internet was a new and exciting toy whose dangers most of us didn't fully appreciate.  Not only are we now much more clued up on the dangers of the internet but we are more cynical unfortunately.

My Spanish holiday gave me some much needed thinking time and I discovered some more information which has enabled me to produce a more accurate picture of the precise proportions of two parts of the mechanism.  I'm constantly amazed at the amount of information Bessler managed to secrete in various places under our eyes, without our noticing.  Anyway back to work, time marches on!

JC