Saturday 31 May 2014

UPDATE

Just returned from two weeks in Spain - wonderful place, wonderful people!  I would buy a villa there if I got the wheel working and go there whenever I liked, especially when it rains here - which is almost every other day it seems!

I'm itching to get back to work on the wheel. I am kind of reluctant to make any promises or predictions, given the embarrassing fiasco promulgated by the un-put-downable Trevor!  However I will just say that things are looking good and I really hope I can back up my self-confidence with a runner, but time will tell and I wouldn't wish to give anyone the impression that I had it all within my grasp, only to fall at the next fence....again!

I have, rather foolishly, responded to my family's requests for a finishing date for the current wheel of six weeks - none of them believe in it, except for my lovely granddaughter, now just 21, and who should know better, being as she's at Uni learning to be teacher!  Time has a nasty habit of shrinking as it passes and what seems like a reasonable period to achieve everything is now looking a little small.

Before I left I acquired four MDF discs to act as a base - why four?  Because I have to allow for errors of measurement and corrections despite having it all down in black and white and I intend (hope) that when it is finished and running I will quickly construct a cleaner, nicer model with paint and things to make it look more exciting.  Four seems excessive but it is as well to be prepared.  All I need to do now is to find several lengths of aluminum or mild steel, cropped to the right sizes to act as the levers.  Yes there are levers but I can say no more.  Aluminum will be better as it is easier to drill the holes in the right places.  There's nothing more annoying than using a rather blunt drill bit and achieving an elongated hole which isn't quite right but probably works.  The mild steel just gives a better finish in my opinion.

I know I originally suggested 6th June would be a suitable date for an announcement but it was just a wish not a decision and somewhere around then or shortly after that time seems more likely.  The announcement will, of course possibly be one of a failure, but I'm going to give it my best shot, and if it fails I guess it'll be time to try to explain my thinking and what principle it was based on.  What I can say is that the whole thing is extra-ordinarily simple but the leverage itself is a pretty damned ingenious design

I cannot take credit for the design, that is all Bessler's but I would like to be recognised for having deciphered his remarkably simple but obscure clues.  If this works I shall be able to point to the clues and explain each one which will prove beyond doubt that this is the precise design concept that Bessler used - on the other hand if doesn't work I am convinced that people will see what I have deciphered as still bearing the hall marks of truth and that I have either applied them wrongly or I have missed something.

June 7th - 12th Sheffield DocFest is one of the world's longest documentary film festivals and following an interview I did for a small documentary maker, a pitch for funding is being presented for a full length documentary.  Fingers crossed it gets a sponsor.  Anyway I am open-minded about this as it will require considerable input and I'm not sure I'm the most photogenic personality for the job, but it will cost nothing but time! Entries from USA, Japan, Australia, Austria, Sweden, Germany, France, Chine, Denmark and Norway.  I could go on, it would probably be quicker to mention who won't be there!

A German publisher has taken my original book and plans to publish a German language version in October this year and has just told me that the translation is finished and all he needs are some better illustrations to include in it.  I've sent some to him so now all I can do is wait.

That's it for today - nice to be back.

JC

10a2c5d26e15f6g7h10ik12l3m6n14o14r5s17tu6v5w4y4-3,’.

Sunday 4 May 2014

My latest Poem and a small but Important Update


This is a  poem I wrote a few days ago while waiting for my wife and grandaughter who were trying on dresses and took a little longer than expected.

It's not good poetry but I like it!

Johann Bessler

Three hundred years ago, he saw
the conservation of energy law,
which had previously prevented
every thing that he'd invented,
such as wheels that turned forever
driven just by weight and lever,
finally be circumvented.

The so-called experts who declared
that such devices are absurd,
proscribed their source as gravitation,
nor anything else in isolation,
and deny perpetual motion
could still be a valid notion.
But given the ubiquity
of the earth's force, gravity,
how blind they are to evidence
that Bessler's wheel was common sense.

Gravity is not exclusive
permeating and diffusive,
it affects all in its compass,
supplying weight and moving mass;
with the right configuration
it supplies from gravitation
wheels which turn continuously,
simply driven by gravity.

Those scientists who vent their spleen,
who criticise us and demean
our strong belief that such machines
do not turn in isolation
but draw their strength from gravitation..........
ARE WRONG! 


The time is drawing closer when I shall reveal my wheel.......or give up and share everything I know - or think I know!.  I am about as confident of success as I have ever been, and I hope to make an announcement on June 6th (seems like a good date for such an announcement) but until then I cannot find a lot to talk about, so just watch this space until then.

JC






Tuesday 8 April 2014

I'm taking a break to finish my wheel - or publish details about its design.

This may be my last post for some time because I'm finding less and less to write about and I don't see much point in writing a post just to fill a space.  I shall return to posting when I have something I think is of value or interesting to say - such as an important update about my own wheel or someone else's, or details about my hoped for documentary or the publication in German of my original book, which is due out in October of this year; or details of the secret principle I have worked with for the last three years.

My own wheel project proceeds, albeit slowly, and I remain confident that I shall succeed this year, but who knows for certain? Not I. If my own success should magically arrive it will be proclaimed both here and everywhere else - so fear not that you might miss this extraordinary announcement - no chance!

I shall copy and past the 'legend in a nutshell' after these few words, in case anyone should arrive and wonder what went on here  So to all those kind people who took the trouble to read my thoughts and to sometimes post a comment, I offer my profound thanks and I hope that you will drop by occasionally to see if anything new has appeared on this blog.  I shall continue to read and sometimes respond to any comment which you might wish to make. Hasta la vista!

THE LEGEND OF BESSLER'S WHEEL.

The legend of Bessler’s wheel began in 1712 when Johann Bessler announced that he had invented a perpetual motion machine and he would be exhibiting it in the town square in Gera, Germany, on June 6th of that year.

Everyone was free to come and see the machine running and he would demonstrate its unique ability.  It took the form of a wheel mounted between two pillars and could run continuously until it was stopped or its parts wore out. The machine attracted huge crowds.  Although they were allowed to examine its external appearance thoroughly, they could not view the interior, because the inventor wished to sell the secret of its construction for the sum of 10,000 pounds – a sum equal to several millions today.

News of the invention reached the ears of high ranking men, scientists, politicians and members of the aristocracy.  They came and examined the machine, subjected it to numerous tests and concluded that it was genuine. Only one other man, Karl, the Landgrave of Hesse-Kassel, was allowed to view the interior and he testified that the machine was genuine.

There were several attempts to buy the wheel, but negotiations always failed when they reached an impasse – the buyer wished to examine the interior before parting with the money, and the inventor fearing that once the secret was known the buyer would simply leave without paying and make his own perpetual motion machine, would not permit it.  Sadly the machine died with the inventor when he fell to his death during construction of another of his inventions, a vertical axle windmill.

However, the discovery of a series of encoded clues has led many to the opinion that the inventor left instructions for reconstructing his wheel, long after his death.  The clues were discovered during the process of investigating the official reports of the time which seemed to rule out any chance of fraud, hence the  interest in discovering the truth about the legend of Bessler’s wheel.

My own interest was sparked by the realisation that an earlier highly critical account explained how the wheel was driven according to Bessler’s maid - an explanation so obviously flawed that I was immediately attracted to further research. In time I realised that there was no fraud whichleft me with the only other possible explanation, the wheel was genuine and the claims of the inventor genuine

The tests involved lifting heavy weights from the castle yard to the roof, driving an Archimedes water pump and an endurance test lasting 56 days under lock and key and armed guard.  Bessler also organised demonstrations involving running the wheel on one set of bearings opened for inspection – and then transferring the device to a second set of open bearings, both sets having been examined to everyone’s satisfaction, both before, after and during the examination.

The only fly in the ointment, so to speak, is the fact that modern science appears to deny that Bessler; wheel was possible, but my own research has discovered what might be called a loop-hole, a work-around that avoids conflict with the laws of physics.

JC

10a2c5d26e15f6g7h10ik12l3m6n14o14r5s17tu6v5w4y4-3,’.

Monday 31 March 2014

The Legend of Bessler's Wheel - in a nutshell.


The legend of Bessler’s wheel began in 1712 when Johann Bessler announced that he had invented a perpetual motion machine and he would be exhibiting it in the town square in Gera, Germany, on June 6th of that year. 

Everyone was free to come and see the machine running and he would demonstrate its unique ability.  It took the form of a wheel mounted between two pillars and could run continuously until it was stopped or its parts wore out. The machine attracted huge crowds.  Although they were allowed to examine its external appearance thoroughly, they could not view the interior, because the inventor wished to sell the secret of its construction for the sum of 10,000 pounds – a sum equal to several millions today.

News of the invention reached the ears of high ranking men, scientists, politicians and members of the aristocracy.  They came and examined the machine, subjected it to numerous tests and concluded that it was genuine. Only one other man, Karl, the Landgrave of Hesse-Kassel, was allowed to view the interior and he testified that the machine was genuine.

There were several attempts to buy the wheel, but negotiations always failed when they reached an impasse – the buyer wished to examine the interior before parting with the money, and the inventor fearing that once the secret was known the buyer would simply leave without paying and make his own perpetual motion machine, would not permit it.  Sadly the machine died with the inventor when he fell to his death during construction of another of his inventions, a vertical axle windmill. 

However, the discovery of a series of encoded clues has led many to the opinion that the inventor left instructions for reconstructing his wheel, long after his death.  The clues were discovered during the process of investigating the official reports of the time which seemed to rule out any chance of fraud, hence the  interest in discovering the truth about the legend of Bessler’s wheel. 

My own interest was sparked by the realisation that an earlier highly critical account explained how the wheel was driven according to Bessler’s maid - an explanation so obviously flawed that I was immediately attracted to further research. In time I realised that there was no fraud whichleft me with the only other possible explanation, the wheel was genuine and the claims of the inventor genuine

The tests involved lifting heavy weights from the castle yard to the roof, driving an Archimedes water pump and an endurance test lasting 56 days under lock and key and armed guard.  Bessler also organised demonstrations involving running the wheel on one set of bearings opened for inspection – and then transferring the device to a second set of open bearings, both sets having been examined to everyone’s satisfaction, both before, after and during the examination.

The only fly in the ointment, so to speak, is the fact that modern science appears to deny that Bessler; wheel was possible, but my own research has discovered what might be called a loop-hole, a work-around that avoids conflict with the laws of physics.

JC

10a2c5d26e15f6g7h10ik12l3m6n14o14r5s17tu6v5w4y4-3,’.

Wednesday 19 March 2014

Obsessed with Solving the Bessler codes?

I've suggested that Johann Bessler was obsessed with the number 5 because so many times it is revealed in his written works, in simple ciphers.  The clues leading to these ciphers are obvious and undeniable and it seems obvious that he was trying to convey some information to us but exactly what has remained a matter for conjecture with no hard established proof to support any kind of conclusion.

It has also been observed that I sometimes seem equally obsessed with the number 5, but the word obsession simply describes  'a persistent preoccupation, idea, or feeling'.  Nothing wrong with that and I freely admit to it.  The key is to not let it rule your life to the exclusion of all else.  If Bessler felt is was important for us to understand the importance of the number 5 then surely it is worth pursuing every avenue to discover what he was trying to say.

I had for many years become convinced that it referred to the number of mechanisms in the machine and tried to make wheels which had five of my mechanisms inside but none have worked - and there seemed little point in continuing that course if I only needed, say one or two or three just to prove my concept was valid.  Recently my designs have led me to conclude that having five mechanism is just too complex a configuration and considering the 4 inch depth of the first wheel I scrapped the idea of five and settled down to just trying to make one crossing 'barely turn the wheel' as Bessler put it.

Recent discoveries have led me to think that the five does indeed refer to the pentagram but not in an obvious way and you won't find it depicted in the successful configuration.  It's presence might even be invisible to the eye unless you know what you are looking for, and I think its presence is coincidental and not calculable in advance, however I think that knowledge of the pentagram will help to configure the mechanism.

These thoughts are really nothing more than speculation and not provable at this point although I hope to do so eventually.  The reasons for my belief in this is that the pentagonal numbers show up in unexpected ways, and sometimes adding two apparently disparate numbers results in a pentagonal number, and you find part of a pentagon in the configuration.  

In fact the idea that there had to be five mechanisms has been rejected by most of us and I must admit that the idea that this was what Bessler was trying to put across seems way to simple a concept to spend so much time and effort in suggesting by cunning turns of phrase and alphanumeric clues.

To demonstrate how easy it is to be sidetracked by incorrect assumptions, here's a little game I played last night to help me sleep.  OBSESSED?

O = Orffyreus

B= Bessler ;  or OB= Over balanced

S = 18th letter of Bessler's 24 letter alphabet.  18 is the smallest angle used in the pentagram and the one for which every other is a multiple.

E = Could be his two initials for Ernst Elias, and the fifth letter - twice.

SS = Looks a bit like 55, as used for the 55 verses in chapter 55 of his Apologia Poetica - and of course it's the 18th letter and twice 18 is 36 another pentagonal number

E = 5th letter and the number 5 was Bessler's obsession.

D = Latin numeral for 500, includes 5 and two O's to represent Bessler's wheel as he did, although his had a point in the middle to make a circumpunct.


I suspect that most of us are mildly obsessed with solving this puzzle  and we won't give up.

You can play this game with any words and make 2 plus 2 = 5!

JC

 10a2c5d26e15f6g7h10ik12l3m6n14o14r5s17tu6v5w4y4-3,’.

Friday 14 March 2014

The Laws of Physics can accomodate Bessler's Wheel.

It has been commented on more than one occasion on the besslerwheel forum that when the solution to recreating Bessler's wheel is discovered, the laws of physics will have to be amended.  This suggestion cannot be more wrong, in my opinion.  Just recently it was repeated and I thought it worthwhile to see if this view is justified.

We refer to Bessler's wheel as a perpetual motion machine because it would run for ever or until its parts wore out.  But originally this concept was supposed to apply to machines which had no access to an external energy source, obviously an outdated and irrelevant idea because energy has to be accessible to enable work to be done. We might as well call an internal combustion engine a perpetual motion machine because it will run for ever or until its parts wore out - as long as it has sufficient gas to continue to burn, and the same applies to Bessler's wheel as long as it is enabled by gravity.

Bessler used weights, and that is beyond doubt, so gravity had to supply that energy regardless of what others may say or what we have been taught.  The simplest solution is always the best and usually correct so because Bessler's wheel required gravity to work, gravity must have supplied the necessary energy.  Those who rehearse the old arguments about closed loops etc do not allow the presence of several weights to achieve what one weight cannot possibly do - and that is to fall around in a closed loop.

With a specific configuration applied to work according to the right principle there is no good reason why a permanent state of imbalance should not be achievable.  The first wheels were permanently out of balance that is why they began to spin as soon as the brake was released.  If you can begin rotation in an out of balance state then it should be possible for it to continue to rotate in an out of balance state.

I see no reason for a change in the laws of physics to accommodate the above.  The laws have stood us well over the intervening 300 years and they will continue to do so without anyone messing with them.

JC

10a2c5d26e15f6g7h10ik12l3m6n14o14r5s17tu6v5w4y4-3,’.

Thursday 6 March 2014

More on the dual-directional wheels and the single directional ones.

In my previous blog, I suggested that it made more sense to try to replicate Bessler's single-direction wheels than his later, admittedly more difficult to make, dual-direction ones, and I forgot to add that my comparison was to the Kassel wheel, which rotated at 26 RPM, unloaded.  The previous, Merseburg wheel, rotated much faster at 40 RPM, despite being dual-directional.

At first sight this may seem to damage my argument about two mirror image windmills rotating at half the speed of a single one, but I still think they would if their components were identical in all size respects, but what it does also do is back up Bessler's contention that he could design wheels which could revolve faster or slower and with more power or less as required.  He also suggested that a wheel of 20 ells could be built - more than 40 feet in diameter!  At that time, John Rowley, Master Model-maker and engineer to King George I, designed and built a tidal wheel for pumping water into the Royal Palace at Windsor measuring "twenty four foot diameter and twelve foot broad; for the new brass engine with brasses to the crank, forcing rods and a new crank."  So that kind of size was not inconceivable.

My point is that what ever size and speed and lifting power was possible, we cannot make any assumptions about the mechanism inside the wheels other than to reflect on Bessler's own words about the Merseburg wheel:-
"I constructed my great work, the 6-ell diameter wheel. It revolved in either direction, but caused me a few headaches before I got the mechanism properly adjusted. Why did I make this wheel, you may well ask, and so I will now give you my answer. During my stay in Obergreisslau my detractors put out the cunning falsehood (in order to deceive the world) that my device, like a clock, needed to be wound up. This caused me to make some changes to the mechanism so that all intelligent people would appreciate the falseness of such a proposition. People then began to believe - and they freely admitted it - that the wheel did not require winding up."
The dual-directional wheel was more difficult to make than the single-directional one so logic suggests that the first one would be the place to start.  However I know there are many people out there who are still convinced that there is more to making the wheel dual-directional than simply adding  mirror imaged mechanisms to the same axle, as I described in my previous blog.  In further defense of my belief in keeping it simple by concentrating on the first two wheels, I shall point to the fact that the first two wheels measured 4 inches and 6 inches in thickness, respectively; but the second two were nearly a foot thick, so twice that of the second wheel, and the last one was eighteen inches thick.  This implies the extra thickness was needed to accommodate two sets of mirrored mechanisms.

JC

 10a2c5d26e15f6g7h10ik12l3m6n14o14r5s17tu6v5w4y4-3,’.


Sunday 2 March 2014

The simplest wheel to reproduce will be the one-direction wheel

I'm sure I've written on this subject previously but it bears repeating I think.
 
I have noticed that some people on the besslerwheel forum describe their ideas for reproducing the two-directional wheel; this seems to me to complicate finding the solution.  Bessler's first wheel could only turn in one direction and he only introduced the ones which could be turned in either direction, to answer the accusations that his machine was driven by clockwork.  He says that it was  a very difficult task to accomplish.

In looking for the correct path it seems sensible to take a look at the simplest machine, which was the one direction wheel.  This had to be locked to prevent it spinning, because it was in a permanent state of imbalance.  I know there are some who have dismissed this claim by Bessler and have suggested that the wheel had to stopped at a certain point where the weights would tip over and begin the rotation s soon as the brake was released.  I see no reason for adding speculation to the words written by the inventor himself; "these weights are themselves the PM device, the ‘essential constituent parts’
which must of necessity continue to exercise their motive force indefinitely – so long as they keep away from the centre of gravity. To this end they are enclosed in a structure or framework, and coordinated in such a way that not only are they prevented from attaining their desired equilibrium or ‘point of rest’, but they must for ever seek it,
"

I have emboldened the critical words; the weights keep away from the centre of gravity, followed by this comment, they prevented from attaining their desired equilibrium or ‘point of rest’, but they must for ever seek it.  What could be clearerThe machine is continually out of balance, hence the need for the brake.
 
I performed some experiments a few years ago, with a Savonius windmill and a large fan.  I first spun the windmill with the aid of the fan and noted its speed.  Then I mounted a second Savonius windmill onto the same vertical axle.  This second one was designed to turn the other way.  I drove the two windmills with the fan and noted that although they turned in opposite directions their speeds were still similar to the first run with the single windmill.

I then linked the two windmills together.  Whereas before, the two windmills had begun to rotate spontaneously  as soon the breeze from the fan hit them, now they remained motionless.  But when I gave the joint assembly of both windmills a gentle nudge in one direction or another, it began to turn slowly at first but reached full speed in about three turns.  The speed reached was half that of the single windmill - exactly the same result as demonstrated by Bessler's two-directions wheels.

OK, this is not an unexpected result but it shows that the two-direction wheels were also performing as expected - and it also shows that the one-direction wheel also performed a expected; starting spontaneously

So we should be studying the one-direction wheels and trying to find a way to make them always out of balance.  

PS Forgive the unintentional links to the boy band One Direction!

JC

 10a2c5d26e15f6g7h10ik12l3m6n14o14r5s17tu6v5w4y4-3,’.

Saturday 22 February 2014

Wheel update - two mechanisms for proof of principle....again!

It's funny how you can think you know everything there is to know about your design and how it will act and react when in a particular configuration.  My latest design did not react as I had designed it to, but instead of causing me extreme chagrin, it surprised me by acting in an unexpected way.   I knew from the start of this configuration that there were potential variables to the way I finished the design, and I was prepared to substitute those alternatives that would still comply with the initial concept.

Imagine my surprise therefore to discover that the reaction which I had designed to occur within my planned configuration was not only prevented from happening but actually reversed itself and I realised subsequently, it turned out to be the right one!  The correct path of the movement of the weights within my wheel was not intuitively obvious, but actually it makes perfect sense.  How on earth Bessler was able to design them to work as I have now think  that they should work, is just amazing.  I have very briefly imagined that configuration in the past but have dismissed it with scarcely a thought, as being impossible to achieve in a simple mechanical arrangement.

My task now is to remake the wheel with those actions repeated ad infinitum.  I am very doubtful if I can make it with five mechanisms as I have always assumed, so will have to try it with maybe just two. I'm 'fairly' confident that this is the right path, but haven't we all been here before - too many times to dwell on!

Bessler said that when he first tested his wheel it could scarcely turn with just one cross.  This word 'cross' has been a bit of a thorn in my side for many years.  Beside describing a cross as in an X or a plus sign, it can also be used to describe the crossing of a road for example or a level-crossing, as long as the word can also be 'crossing' anything related may apply.

So the phrase seems to imply that the wheel did turn with only one crossing, albeit very slowly and/or unevenly.  In which case one crossing will do, but what does a single crossing consist of? I am unconvinced that one mechanism could achieve a full turn so I am suggesting a minimum of two were needed.  Bessler said that his weight worked in pairs so two mechanisms might comprise one crossing.

I thought that the obsession with the number five suggested five mechanisms and that this number represented the total number of mechanisms possible on one side of the wheel and he had already hinted that more than a single cross was better. So I'm going to make two--mechanism wheel, one on each side, and include my new configuration and hope for success. I should add that my original principle, encoded below, is still the mainstay of my design as without I am certain no success will follow.

One more bit of news; I received an email from a literary agent with the news that a German publisher wishes to translate my book into German and publish it before the end of this year.  Fingers crossed that this time the book appears.  I had a similar experience several years ago but nothing was published then so I am less inclined to get excited about these occasional flurries of interest from the media.

There was the Italian film which was made about Bessler which seems to have sunk without trace after one broadcast; and I'm still waiting to hear about the English documentary promised for this year too.  It looks as if I'm just going to have wait for somebody to invent Bessler's wheel again before anyone really gets excited about the subject.

JC

 10a2c5d26e15f6g7h10ik12l3m6n14o14r5s17tu6v5w4y4-3,’.

Thursday 13 February 2014

Update on Bessler's Code

This is a general update on my efforts to decipher Bessler's codes.

Everyone is surely familiar with his first code which involved using the simple substitution cipher from the Hebrew 'atbash' system to convert his name, Bessler, to Orffyre, and thence to Orffyreus. He intended future researchers to ask why he did this and provoke them into looking for further examples in the rest of his publications. His second example included the drawing of his wheel which he published in his first book, 'Gruendlicher Bericht'.  The drawing contains a number of extremely clever clues, but the first and most easily found is the hidden pentagram defined by the rope passing behind the right hand wheel.  There are a numberof numerical clues included as well as evidence of the use of the Golden Mean or Golden ratio, 1.618.  This was produced before his most intriguing work his Apologia Poetica, which was published between 1716 and 1717. At the bottom of the page Bessler writes the date of publication as 1716, two dashes and 1717. The dashes could be construed as just decoration, however the existence of several more similar dashes in part two of Apologia, suggests that the blanks represent the word ‘zu’ which means ‘to’. Adding together the 17, 17, 17 and 16 totals 67. add the u/v from zu which represents 5 and you get 72, the main pentagon number; 5 times 72 =360. The coded information which litters this work is so numerous and varied that it would seem impossible that no one has so far deciphered at least some of it.

In this publication (AP) there are the numerous 'ec's which in the Fraktur font look like 'x's.  'ec' stands for et cetera in German printing, but still their sheer ubiquity (684) draws attention to them and seems to be asking us the examine their presence and find out why they are there, since they don't appear at all in his other two publications.

The abbreviation for et cetera, ec, which looks like x.
The final page of Apologia Poetica contains a simple diagram which appears to represent the wheel.  It too contains a number of ingenious clues which again point to the pentagon.  Above this illustration is a quotation from the Bible, in which Jesus asks of his disciple, 'do you still not understand?'  Another hint that we should be looking for understanding, and elsewhere Bessler states that the answers can be found in his Apologia Poetica.  The quotation itself takes the form of a chronogram. Chronograms were particularly popular in Germany in this period and were often used on buildings to establish the date of their construction.  In this case there are several Latin uppercase letters D, I, D, V, C, C, V, V, D and I, from within the quotation, and assuming they also represent Roman numerals, added together they total the figure 1717, the year of Apologia Poetica's publication. The final line of the paragraph contains two blanks as if words had been omitted, but it is simple to add them as the whole book is in rhyming couplets and the missing word, Teufel contains the U/V alternatives which in Roman numerals represents the number 5.  The sheer number of encoded 5's, V's or their numeric/alphabetic equivalents such the letter E for being the 5th letter, is so overwhelming that one has to assume that the five and all things associated with it, such as the pentagram,  is of prime importance.


The last Chapter in the first part of Apologia Poetica is numbered 55, no surprise..  It contains 55 rhyming couplets, but just these 55 are rhymed ABAB rather than AABB as the rest of the book.  The same 55 verses contain 141 Bible references.  Research indicates that these have no relation to their actual quotations and in some cases the verse numbers exceed those actually present in any of the numerous Bible extant at that time. The references consist of the Book, the Chapter and the Verse.  My ongoing research indicates that verse number indicates the line in which a coded letter may be found.  This implies that the lines must all be numbered up to 220 (55 x 4).  However, as I have explained elsewhere, there are four empty lines which will throw the numbering out if the blank lines are not counted.


The bible book quoted has one upper case letter, the first one, and the others are lower case.  The first letter can be deciphered using the 24 letter alphabet, and its alphanumeric equivalent.  The books are all abbreviated so that there only a few letters indicating which book is meant.  These lower case letter must simply be counted and added to the numerical equivalent arrived at from the first letter.  So 'Matt' for 'Matthew' would be M=12, plus 'att' = 3 and therefore 12 plus three equals 15, thus 15th line.  As the verse number has already given you the line in question, the Book gives you the position on the line of the required letter.  You will see that the abbreviations vary and this is so that each required line can easily be indicated despite the fact that Bessler can only use a limited number of the possible books available, and also because there are more than 24 letters in most of the lines - usually around 30.  I have found that some lines require counting from the end rather than the beginning and I am sure there is an indicator which tells us if it should be done this way but so far I have not found it.


There is also an indicator that the letters should be Caesar-shifted back by five, so that the letter 'A' becomes equivalent to the letter 'V' but I'm not sure at this point whether the numerical equivalent is meant or simple the alphabetical substitution.


The so-called 'X's, that I mentioned at the start may indicate a line which contains a letter for deciphering and the possibilities which I have not yet exhausted include equidistant letter sequences (ELS) relating to the number 5 again.  I was not aware that this method of encoding information was familiar to anyone in those days, other than in the Hebrew Bible, but it turns out that it was widely used by Francis Bacon and John Dee among others and so it cannot be ruled out.


This blog scarcely scratches the surface of the encoded material and I shall return to the subject at a later date if there is sufficient interest.


JC

 10a2c5d26e15f6g7h10ik12l3m6n14o14r5s17tu6v5w4y4-3,’.

Thursday 6 February 2014

Wheel update - precipitation, inundation, electrocution, procrastination and birthday celebration!

I included the word 'birthday' before anyone jumped the conclusion that I had succeeded in reconstructing Bessler's wheel - ridiculous thought!

Well I had hoped to be nearing completion but the interminable rain has put a bit of a damper on progress. "The deluge that has engulfed southern and central England in recent weeks is the worst winter downpour in almost 250 years, according to figures from the world's longest-running weather station.

The rainfall measured at the historic Radcliffe Meteorological Station at Oxford University in January was greater than for any winter month since daily recording began there in 1767, and three times the average amount."  Excerpt from the Observer newspaper.  Saturday 1st February.

This is definitely down to climate change although the jury is still out on the cause- man-made or a natural . The increased concentrations of  gases, especially carbon dioxide can cause global warming. There is apparently significant scientific evidence that points to human activities, such as burning of fossil fuels, as being mainly responsible for the current increased levels of greenhouse gases in the atmosphere.   

On the other hand, changes in solar energy can affect global temperature. Thousands of years ago, global temperature changes were driven by solar and orbital variations. The Royal Society, the National Academy of Science in the UK and the Commonwealth confirms that solar activity contributed to changes in global temperature in the early 20th century.

Either way the rain is falling and I have a leak in my workshop; the rain is actually cascading down the outside wall of my house which in this case forms one wall of my workshop!  I've managed to move everything away from the leaking area, but I can't move the electrics so I've had to turn everything off until I can fix the leak.

So I'm 69 today and I had hoped to finish this darn wheel but hey-ho, what's another few days after 50-odd years!

Although I am unconvinced about the cause of climate change I can see its happening and strange to relate it might just be causing a delay in the Bessler wheel solution - that is if I am on the right track and who knows for sure?  I mean this flood is causing me a delay in finishing my wheel but perhaps it's nature showing us how puny our efforts to control her are.

There are some who might be tempted to suggest that there is an element of procrastination in this delay and on previous occasions I might well be persuaded to admit that.  Let's face it as long as the wheel isn't finished I can go on maintaining the belief that I am about to succeed, but if I finish it and it still doesn't work, what then?  I admit to failure and reveal all that I know (or think I know) and let others search for a nugget of gold in my mental meanderings.  But this time I can say, hand on heart, I am so eager to finish this wheel , that I was prepared to risk electrocution until my wife and son-in-law stopped me, thank goodness!

JC

 10a2c5d26e15f6g7h10ik12l3m6n14o14r5s17tu6v5w4y4-3,’.

Thursday 30 January 2014

Update - will this one work, or will I have to share what I know?

My wheel is taking shape but I realised that because of the other attractions over Christmas, I had not looked at it for about three weeks and had forgotten that I had made a small error on drawing in the mechanism and had turned the wheel over to start my drawing again.  So on my return I was somewhat puzzled to know where I had got to - this is what happens as you get older, the memory starts to fail you! Fortunately I eventually turned the wheel over again and saw my error and was able to put it right on the other side.  

Because I (believe I) have now got the complete design with angles and lengths and of course the secret principle, I am actually drawing it out on the wheel, and I can then drill holes measure levers etc., and fit them exactly where they should go and all the stops are located in their proper places.  The hold-up occurred because I missed out a vital calculation which resulted in the levers being drawn on the wheel but incorrectly placed.  

I have to confess that a younger person would probably have finished the wheel by now but I am aiming to finish this one in a week or so and thank goodness!  It's been a long haul to get to where I am now.  I have always said that if my wheel fails I will share what I know and I guess that moment is approaching, so I'm keeping my fingers crossed for this one.  I shall be 69 next Wednesday, 5th Feb, and that would be a good day to succeed but it could be a few days after.

If it doesn't act as I designed it to do, there is one more additional movement to make which I suspect I shall have to incorporate which I think (hopefully) complies with Bessler's comment about 'connectedness' or as I prefer to say 'interconnectedness'.   If these fail then I shall finish the document I have been writing and publish it and await the reaction.  If my previous 'revelations' are anything to go by then a fairly muted response can be expected because no one accepts any theories without a working model, I know I don't.

But there will be one thing in the document which will hopefully get a more excited response, however I'm jumping the gun here - the model's not finished yet and I'm kind of optimistic about this one.

JC

 10a2c5d26e15f6g7h10ik12l3m6n14o14r5s17tu6v5w4y4-3,’.

Monday 27 January 2014

When is a Conservative Force Not a Conservative Force, Answer - When it is the Wind.

I mentioned recently their seeming reluctance to expand on the answers to some questions I had put to my teachers many years ago, when I was trying to understand why Bessler's wheel could not work.  I had received the standard physics tuition and understood what I was taught, but there were still questions bothering me which related solely to Bessler's wheel, and I have never ever been able to get a satisfactory response, not once in the intervening 50 odd years.

I shall try to be as succinct as I can.  The laws of physics were designed to describe as accurately as possible each possible action and reaction, but sometimes they remind me of a legal document.  They describe the simplest of actions in the most accurate terms possible and in the event often obscure the precise meaning they try to convey.  It can sometimes help to look at the broader picture to get an idea of what is happening.

I'm assuming that we all know and understand the definition of a conservative force - and that gravity is conservative.  It's not path-dependent and it can store or regain potential energy, unlike non-conservative forces.

For the above reasons we are assured that Bessler's gravity wheel did not work - except that it did. If gravity is a conservative force, what non-conservative forces are there?  Well actually there aren't many.  Oh they will point to friction and springs and some magnetic attractions. and the like, but it seems that it is difficult to identify non-conservative forces, because they are so few and not really relevant to our cause.

Now it is a curious fact that when discussing conservative and non-conservative forces no mention is ever made of the wind as a force.  I've searched everywhere for a statement which affirms the wind's status as either conservative or non-conservative, but it just isn't there.  Occasionally you will find a brief reference to the wind as being non-conservative within some other calculations but nothing else. I have maintained for many years that the wind should be identified as a conservative force and because it is capable of driving rotatable machinery i.e. windmills; then gravity too should be capable of driving a wheel continuously, but of course wind is non-conservative isn't it?  No! This assumption is wrong and provably so.

All you have to do is compare the defining criteria for a conservative force as applied to gravity with those of the wind. Gravity is path independent, the object moved from A to B can travel by any path and this applies to the wind as it impacts on a windmill's blades.  Gravity can store mechanical energy as demonstrated when one lifts a fallen book back on to its shelf; a balloon can be pulled along into the wind and held there with the potential energy of the wind available to carry it away.  There are a number of similarities which confirm the wind's status as a conservative force and I have no idea why this fact has not been picked up by the establishment.  I assume it is because the conservative nature of the wind does not raise questions the way the gravitational force does. We understand how the wind is generated and why it flows in a particular direction at any one time.

If the very idea that the wind is a conservative force disagrees with your own impression of it, consider the opposite side of the coin; if it is non-conservative how does it turn a Savonius windmill, or an anemometer?  How could you even measure the strength of the wind because non-conservative forces are of brief duration.

I mentioned looking at the broader picture when considering conservative as opposed to non-conservative forces.  I think of conservative forces as enduring forces, not explosive actions of extremely limited duration which non-conservative forces tend to be.  Enduring forces conserve mechanical energy, non-conservative forces expend their mechanical energy and the energy released dissipates as heat etc.

JC

Tuesday 21 January 2014

Will Bessler's wheel have a place in today's world?

The simple answer is yes, but why?  First of all it has investment potential and therefore it could be profitable. Today there are thousands of investment companies looking to invest in new technology, but imagine that, 300 years ago, in Bessler's time, a group of investors had sought something to put their money into, they would have been advised to put it in coal because the steam age was fast approaching; but that would only have happened after  the arrival of Thomas Newcomen and his coal-burning water-pumping engine, and  later, James Watt with the first steam engine that produced continuous rotary motion, which led to the railways and steam ships.  They would also have attracted investors first..

150 years later, they would have been  looking at oil as an investment, thanks to the efforts of  James Young, who invented a process to distil kerosene from petroleum and also produced a heavier oil for lubrication.In 1848 Young set up a small business refining the crude oil. This led, through a tortuous path and a number of experiments, to the invention of the internal combustion engine which burned a derivative of Young's crude oil refinement - gasoline.  Where would today's cars, ships and planes be without gas?

During the 19th and 20th centuries it was and is still oil, but electricity was a burgeoning industry and the means to produce it has become so diverse that the multiple investments have spread across a number of differing methods.  Solar panels, photovoltaic cells, wind farms, tidal and wave generators, geothermal units, hydroelectricity, and of course the fossil fuel as in coal and oil.  In addition the U.S. Department of Energy evaluated the Hydrogen and Fuel Cells Program on May 13–17, 2013, in Arlington, Virginia.  Unfortunately, Hydrogen-powered vehicles are not as green as they are portrayed and although they might be an alternative to gas-powered vehicles, one problem with this is that the hydrogen is typically produced from a fossil fuel—natural gas—in a process that releases a lot of carbon dioxide.  Obviously there are more technologies than I can cover in a brief blog, but the picture is clear, there are many competing technologies but they all have one or more negative aspects which have so far precluded complete global investment.  Any other problems?  Here's three.

Pollution, the peak of available oil production has passed, and global warming is affecting the climate.

The search is on, like never before, to find the ultimate solution to the three problems identified above.   Clean energy to combat pollution, and yet which is capable of replacing most of the oil-based (and coal etc.) electricity generators.  What ever reason you subscribe to, carbon dioxide and the greenhouse effect - or the changing output from the sun - the climate is changing and even though driving a smaller car won't make the slightest difference to the global output of carbon dioxide, reducing pollution anyway has to be a good idea.

Bessler's wheel has no negatives - except for one, and it's a biggy!  It's believed to be impossible - against the established laws of physics etc. But I intend to challenge this view with my working model and call to account all those so-called experts who taught us so well, that we all believed them. One of the curious things I intend to comment on in  a later blog, is the number of questions I and others asked to which no one ever gave a sensible answer, they just repeated parrot-fashion the old cliches.  I don't want to present any of the questions without the reasoning that lies behind each, so I'll leave that aside for now.

So given the industries I mentioned briefly above and how they started so small, each as an idea in one man's mind, and yet were able to colonise the globe with the ramifications which followed their development, what path would Bessler's wheel take?

I can't list all the possible future developments ahead but the first thing to do would be to attach it to electricity generator.  Now some say it wouldn't be powerful enough.  I don't know why they say that. Bessler said they could be much bigger and obviously if several wheel were placed in series on one axle the power might be sufficient for a whole street let alone an individual house.

Miniature device could be developed so small they could might power tablet computers for instance; or they may become large enough to power  cars, ships and trains.

My point is, as it always has been, we must produce the evidence in the form of one working wheel ....and give it away and the entrepreneurs will run with it.  Who knows what uses they will find for it, but I know for sure that when it does appear the world will go crazy for it. 
 
JC

10a2c5d26e15f6g7h10ik12l3m6n14o14r5s17tu6v5w4y4-3,’.











Thursday 16 January 2014

Let Us Ponder upon Bessler's Rich Pageantry of Words!

I have been meaning to comment on the rather strange passage in Bessler's Apologia Poetica, in chapter XLVI.  Bessler introduces it by urging us to study his 'rich pageantry of words'.  Having returned to the original many times, I can only find the following amateur translation of the original translator's valiant efforts . The original German words appear to describe the passage as containing resplendent words or flaunting words, which doesn't seem to me to a million miles from my original translator's efforts, if a little less poetic. It appears to be a poetic description of something which we suspect is related to the wheel, but quite how is hard to determine.  I decided to put my thoughts down about it, as far as I can, which isn't far.  It is almost all speculation although I have tried to use common sense, avoiding the higher realms of speculation.

It begins thus:- "Those who are keen to ask questions should ask them of this little book. My work will not be revealed prematurely. Should anyone wish to speculate about the truth, let him just ponder on the rich pageantry of words which I now cause to shower down upon him!"

Are they metaphors, similes, analogies or what?  I cannot say but they seem to contain some kind of truth which to me is not apparent but here goes anyway.

So the first thing to do is to identify where it starts.  Many people assume the translation from my book which commences "for greed is an evil plant..." is the beginning of a metaphorical description of the mechanism. My own view is slightly different.  There is a little trick that Bessler uses that some people may not be aware of or have forgotten.  We are all familiar with the names of his avowed enemies, Christian Wagner, Andreas Gärtner and Johann Gottfried Borlach, and Bessler would frequently include their initials in the text, easily identifiable by using Roman characters instead of the usual Fraktur font.  Often the letter would form the first letter of a mildly offensive word probably for his own satisfaction and to poke fun at his enemies.

In the adjacent image taken from the original. I have ringed in yellow, the particular letters to illustrate the point. In the image you can read in order, Gärtner, Wagner and Borlach, twice. Throughout the book there are many examples all aimed at the same three people. 



From the following line, Bessler begins his metaphorical descriptions.

"An anvil receives many blows. A driver drives. A runner runs. The seer sees. The buyer buys. The rain drips down. Snow falls. The shotgun shoots. The bow twangs."

I see these as descriptions of various forces and/or actions within his wheel.  The anvil receives many blows, but it is immoveable, despite the heavy blows it endures. This may relate to the part of the wheel on which the weights land. 

A driver drives and that is a proactive action as demonstrated by the blacksmith hitting the anvil with the hammer.  It seems to indicate that something causes the weights to move. The runner runs, and that is a reactive force moving swiftly without hindrance, perhaps like an object which has been hit and just moves quickly as a billiard ball might move across a table.  The seer sees, is perhaps a non-reactive object which awaits an action upon it.  The buyer buys is the opposite in a way, it is proactive again and awaits its chance to act not react.

Next we see the forces available.  Rain drips down, under the influence of gravity (not in response to an action such as a hammer blow).  Snow falls but it is lighter than rainwater so it falls slowly.  The shotgun is an explosive force and not conserved as gravity is, so it's a once only push.  The bow is similarly explosive but actioned by tension rather than a chemical agregate.  

"A great fat herd of fat, lazy, plump horses wanders aimlessly."  This may refer to the weights hanging without any control from levers or stops, so they hang and swing without guidance, at a certain point during rotation.

"The flail would rather be with the thresher than with the scholar."  The flail was a kind of threshing device and bit like a whip. This suggests that the flail/whip strikes the scholar/pupil but does not linger but instead returns quickly to its 'cocked' position, ready to strike again.  It may relate to the so-called 'stiff fops' mentioned later in the passage.

"The children play on the little/toy pillars/columns with loud heavy little/toy clubs."  There has been much debate over the translation of this piece so it's anybody's guess which is correct., and I cannot suggest something that might be taken seriously as to its meaning!  

The rest is so open to speculation that without the design of the mechanisms in front of me, I cannot relate to any of it, although I have plenty of ideas!

I've added this blog primarily to point out the starting point of the description and perhaps to put aside any thoughts about interpreting the 'greed is an evil plant' line, as it is a dig at his enemies and probably not part of the so-called pageantry of words which the study of, will help those who seek answers from this little book.

JC

10a2c5d26e15f6g7h10ik12l3m6n14o14r5s17tu6v5w4y4-3,’.



Tuesday 14 January 2014

Bessler's Codes - why did he create them?.

Johann Bessler was christened Elias Bessler and added the other two forenames at about the time he exhibited the Merseburg Wheel, the one which could turn in either direction.  Although these additional names were added some time after the first exhibition, and they seem to have been part of a plan to leave information about this wheels hidden within certain documents he was publishing, his pseudonym, Orffyreus, was being used almost from the start.  This seems to indicate that he always planned to encode information about his wheels in published documents s.  

Why he felt the need to do this we can only speculate, but as patents were not available to him at that time we might assume that he undertook this action to try to establish, should it become necessary, his priority claim in the event that another should try to lay claim to being the first to invent the gravity-wheel.  Upon consideration, this action seems hardly worth the effort, because if someone else succeeded in duplicating Bessler's wheel before Bessler himself had sold it, then the result would be the same as if he had openly given away the secret of its construction.  The pretender would have to show how his wheel worked and Bessler would have to prove his priority by showing how his own wheel worked and that it was as described in the encoded information he had buried in his publications.  So perhaps there was another reason also.

He does say at one point that if he fails to sell his wheel he will be content with posthumous recognition. But this was written in 1715 when he had excellent prospects before him and such a plan at the age of 35 seems somewhat pessimistic, so perhaps there was a third and more compelling reason for the code.  Bessler certainly demonstrates that he had a deep and abiding curiosity about codes and the pleasure he derived from its use, drove him to tantalise us by dropping subtle hints in many places about the existence of codes and also leave obvious examples such as chronograms, and the ROT13 ciphers he used to establish his pseudonym, Orffyreus, from Bessler.

I think he would still have enjoyed pointing out his codes and their meanings in the event that he did have to prove his priority, even if it denied him the pecuniary rewards he sought.  But also the posthumous recognition desire was  self-evident so perhaps it was a bit of each reason that led him to devise his complex network of codes.

I'm aware of Ã˜ystein Rustad's work on deciphering codes and I look forward to seeing what he has done, and I have also deciphered a different set of codes and like Bessler, and Ã˜ystein, I think, I can't wait to share what I know!  There are other pieces of code awaiting someone's more  incisive analytical attention, such as the Bible references, and the whole of Das Triumphans,which I believe, contains some hidden gems.

Like many before, I too have found it useful to hide a little code containing what I call the Bessler-Collins principle.  It's not as if I would ever patent anything I found, but it would be good to know that I was first and could prove it, and that is what, in the end, I think was in Bessler's mind when he began devising codes.

There have been many illustrious scientists who used a similar idea to attempt to confirm their discoveries and thus receive their due honour, in the course of time; such people as Galileo, Sir Christopher Wren and Sir Isaac Newton, to name but three.

JC

10a2c5d26e15f6g7h10ik12l3m6n14o14r5s17tu6v5w4y4-3,’.

Thursday 9 January 2014

Bessler's Wheel Required Only Gravity as an Enabling Force.

I'm still being asked why I think Bessler's wheel worked purely on gravity and required no additional forces, and without giving away my own theory, it's difficult to bring something new to the table.  However looking back at the evidence it still seems obvious to me that nothing has changed

Leaving aside, on this occasion the evidence we are all aware of regarding the numerous examinations and tests the wheel was subjected to, Bessler said in Das Triumphens, "NO, these weights are themselves the PM device, the ‘essential constituent parts’" There are several other examples where Bessler discusses his weights and to my mind there is no other option than to consider that his claims were sincere.

There is another point and it is this.  Either we assume that Bessler told the truth and there was no additional force supplied, or he lied and there was another force present; in either case the wheel worked.  If there was another force available how come no-one has discovered what it was and replicated Bessler's wheel?  Such a discovery would be equally amazing and useful as one which only relied on gravity.  If another force was present why wouldn't Bessler hint at it?  He enjoyed dropping obscure hints about the way his wheel worked but he insisted that the weights were all that was needed.  On the Besslerwheel forum several suggestions have been made at what such additional force might be, and none of them are as convincing as the idea that it was simply gravity as Bessler said.  There was very little else available to Bessler at the time apart from ambient temperature changes or perhaps some kind of static electricity. Both ideas to my mind, simply won't do.  Others have suggested centrifugal forces or some such derivative, but in all cases no continuously rotating wheel has surfaced, therefore I am certain that Bessler told the truth and gravity was the sole provider of power to the wheel.  It's a case of Occam's razor which states that among competing hypotheses, the hypothesis with the fewest assumptions should be selected.  Just one assumption is necessary and that is that Bessler told the truth, there was no additional force.

When Sir Isaac Newton wrote his 'Principia', he wrote the whole thing in Latin, which was the accepted way to introduce matters of scientific and intellectual interest.  University lectures were given in Latin and publications such a 'Acta Erditorum' were also published in Latin.  Latin was a universal language at that time and thus students from various countries attended universities in England, France and Germany with equal ability to understand what was being taught.  Newton used the word 'gravitas'  for the force and in this sense, 'gravitas'  translates as 'heaviness'. Everyone understood the term 'heaviness' as a concept but the use of the word 'gravitas' and thus 'gravity', came to be applied later to the concept of 'heaviness as if it had been coined specifically for that purpose.  So when we say that Bessler used the word gravity he didn't mean it in the way we do, he just used the word 'heaviness' as the provider of the force which turned his wheels.

In other words Bessler did not think of gravity in the way we do with all its preconditions about how it can be used, he simply meant heaviness, and weights had heaviness and it was that which he was able to manipulate to his advantage.

Heaviness is a pressure or resistance we feel when we lift something up, or hold it.  I liken it, for example to the same pressure we experience when we fight to hold an umbrella from blowing inside out in the wind; or a gust of wind hits you when you come out from the shelter of a building, or a strong current of water encountered when swimming.  It is simply a pressure.  I used to sail a lot as a young man and it's the same thing when you haul in a sail, the wind pressure fights you all the way.  Gravity is a conservative force; so is the wind, and so is a current of water.  Just because gravity is conservative does not preclude its use as a continuous pressure to drive around a wheel.  The word conservative, as used in this instance, simply means that it does not stop, it continues to apply pressure, just as the wind does when it blows and water too when it is a current. Conservative forces don't really conserve their energy but they conserve their force or momentum. Hitting a ball, on the other hand, is an explosive event and therefore not a conservative event,  It is not continuous in the way that gravity, wind and water streams are. Conservative means that it is not used up with nothing left, the force is conserved not exhausted.  The opposite of conservative or conserved is un-conserved or not conserved, so the three examples above must be conserved or continuous otherwise we could not sail ships, turn windmills, use watermills etc., etc.

Lastly all calculations seem to apply to one weight moving in a circle, they seem to ignore the presence and effect of correctly configured multiple weights.

JC

10a2c5d26e15f6g7h10ik12l3m6n14o14r5s17tu6v5w4y4-3,’.


Johann Bessler, aka Orffyreus, and his Perpetual Motion Machine

Some fifty years ago, after I had established (to my satisfaction at least) that Bessler’s claim to have invented a perpetual motion machine...