Don't tempt fate with a precipitate announcement ... John

This is merely an observation and not aimed at anyone in particular but I note a common theme in postings both here and in the besslerwheel forum and in other alternative energy forums. Before I go any further let me admit that I recognise exactly the same symptoms to a marked degree in my own actions and therefore I speak with some considerable experience.

Researching Bessler and seeking a solution to perfecting a working gravity wheel is what drives most of us and it is commonly observed that many who are involved in this persuit may on occasion have a sudden spontaneous flash of inspiration and illumination in which the solution to the problem is revealed. Further consideration over a period of time - it might be hours, days or months, it makes no difference - and the details acquired in this sudden attainment of intuitive knowledge are confirmed to the apparent satisfaction of the lucky recipient.

Following on from this exciting news and transported by thoughts of fame and fortune, the beneficiary of this amazing insight will be mentally preparing the details of how he will reveal his knowledge to the world with one or two caveats. He will want to ensure that he receives a just reward for his projected success but he will be concerned that the mysterious MIB do not take remedial action to stop any public announcment - and of course he will consider the advisability of patenting his new invention.

These thoughts are common to most of us and understandable, and I suspect that everyone of us has had a moment when the solution seemed clear but upon further consideration it was decided that the design did not answer the problem. There are times too, when even detailed analysis of the apparent solution seems to indicate that we are on the right path and it is only when we come to actually build a model that the truth becomes cruelly apparent.

This tendency to be utterly convinced that you have hit upon the right design does not always fade with experience - I know this better than most! If you wish to share the design and are not concerned about who gets recognition for it, then go ahead and tell the world, but if you wish to have some kind of recognition - and that is perfectly understandable and acceptable - be warned, "multa cadunt inter calicem supremaque labra", or there's many a slip twixt the cup and the lip. It's best, in my opinion, not to say that you have the solution and you have only to complete construction of the device before revealing it to the world, because experience shows that what was revealed intuitively to you in the wee small hours,sometimes has a habit of tripping you up, by not actually working.

Let me stress that this is not so much a message to others as to myself! To all who would seek the glory of success, contain your excitement; say nothing in public; make a working model first.

JC

Aren't we ignoring what is under our nose - Bessler's words?

Discussing my ideas about gravity-driven wheels (gravitywheels) has sparked some interesting ideas and theories by email which might advance my own research - or perhaps someone else's, but I think I'm on my own as far as believing that Bessler's wheel was driven purely by gravity.

I understand the reasons for the complete and utter rejection of this idea, but I don't think anyone understands why I am so committed to this line of reasoning. If it was based entirely on faith, which has been suggested more than once, I could understand why my viewpoint is ignored, but it's not. In addition I find it quite puzzling that almost everyone interested in this extraordinary project is single-mindedly looking for the solution almost anywhere except one which uses gravity alone.

When you read Bessler's words it seems obvious, to me at least, that he means that his wheel was driven entirely and exlusively by gravity, but because this appears to be in breach of the law of conservation of energy, such an idea is rejected without further consideration. To discard this proposal is to reject Bessler's words as if they were either false or designed to mislead, and while I accept that he didn't want anyone to discover his secret, he took the greatest delight, in my opinion, in teasing his readers with small pieces of information designed to titllate and intrigue. I simply don't accept that he wrote all that he did with the intention of completely deceiving us, his readers. He knew or at least hoped that at some point in the not too distant future his secret would be sold and everyone would eventually know how it worked. At that point he would not be best pleased in having to defend himself against accusations of lying or misleading. He was looking forward to pointing to all the clues in triumphant glee.

However that leaves us with a problem; how do we resolve the issue that gravity is a conservative force? I've posted some of my thoughts about that but I haven't revealed the design nor the key factor which I believe I have. I'm working on that but in the mean time I plan to video some demonstrations  of how the conservative nature of gravity does not necessarily hamper us in our search for a solution.  I'll post them and put a link here in due course.  This may take some time to accomplish.

Watch this space.

 

JC

Response to my forum posting about conservative forces.

The publication of my ideas about conservative forces on the Besslerwheel forum was met with a mixture of benign criticism and some somwhat less than favourable comments, as expected. You can't expect to suggest that 300 years of scientific advances might have overlooked some small detail without incurring criticism and argument, and I am not dispappointed by the reaction - it has got people talking about Bessler's wheel again.

What has surprised me is that among a small number of emails I received which offered their support for my conjecture there was one which apologised for not saying so publicly. The reason apparently was that doing so might diminish their standing in some way. I find this remarkable and it seems to mimic the situation between the majority of members and the rest of the world and indeed the whole history of the search for perpetual motion.

Many people who study Bessler's writings look for subtle deceptions and double meanings in everything he wrote and while I am guilty of seeing encoded messages in various places that are not as clear to others as they are to me, I think that he wrote the truth without dissembling and only restricted the information enough not to give the secret away. So when he wrote such phrases as, 'the machine was set in motion by weights'; 'Weights gained force from their own swinging'; 'the weights applied force at right angles to the axis' and Karl's view that' he did not disguise the fact that the mechanism is moved by weights', I think he spoke the truth and I have no doubt whatsoever that the machine depended on the presence of gravity and indeed was run by gravity alone. I see no need to invoke hidden meanings in phrases which describe in normal everyday language, the way the machine worked.  There is a phrase, 'the law of parsimony, or succinctness', which describes the principle of choosing a theory that requires fewer new assumptions, and in this case the simplest interpretation is the most likely one to be right, I think. 

I understand why some highly intelligent and experienced members of the forum insist on sticking to the belief that gravity cannot run the wheel because it is a conservative force, but I regret that they dismiss my thoughts with friendly humour but no serious consideration. And yet I read Bessler's words and can only conclude that gravity was the mainstay of his machine and just because gravity is a conservative force may does not completely and utterly rule out a way around it.  If my suggestion does not meet satisfactorily the criteria sought by those who would deny it, then I can't help but compare them to the rest of the scientific community who also refuse to contemplate such a possibility.

So once again I point the reader to my web site at http://www.besslerswheel.com/html/conservative_force.html, where he will read about the 'mysterious other force' which helps the weight complete its rotation without using any additional energy which wasn't generated by its fall.

JC

Circumstances in which a gravitywheel can be turned continuously by gravity alone.

I have felt for some time that maybe I should put something about my own thoughts about the fact that gravity is a conservative force and therefore apparently unable to drive a gravitywheel continuously.

So I posted a short piece on my web site at http://www.gravitywheel.com/ and perhaps more unwisely, a short copy on the Bessler forum.  I know in advance that some people will take their customary potshots at me for taking this viewpoint but I cannot help my opinion.  I remain uttlerly convinced that there is a way to drive a gravitywheel by means of weights reacting to gravity and no amount of  constant repetition or parroting of the disinformation stuffed down our throat  at school can shake my conviction.

I read and read and read what I had written over and over again and I cannot see how anyone can argue with it, but argie they will and in the end I shall go my own way and maybe I'll prove myself right.  I hope so.

PS

In the light of a new day my words seem a trifle strong.  I wasn't dismissing everything we have been taught, rather I wished to express my doubts about the fact as taught, that because gravity is a conservative force it cannot be used to drive a gravitywheel continuously.  My feeling is that such a statement will one day be shown to be too inclusive, and that a particular mechanical design will allow such a mchine to work.
JC

Bessler's Wheel - The Solution to the Energy Crisis - Spread the news!

When I first published my biography about Johann Bessler, also known as Orffyreus, I discovered that there was a small but keen group of people eager for information about the inventor, which resulted in a steady stream of orders from all over the world from people who appeared on the surface at least, to believe in the possibility of a perpetual motion machine.

Now I was never happy with that designation and I have tried over the years to differentiate the term 'perpetual motion' from what I believe was what Besslers wheel was. I have argued that since his wheel seemed to have acquired its energy from the force of gravity, and a 'perpetual motion' motion machine was believed to have no access to external energy, it could not be called a 'perpetual motion' machine and that a better description would be a 'gravity wheel' or 'gravitywheel'. I think most of the people who bought my book are well aware of the distinction and fully understand the impossibility of 'perpetual motion' machines when defined as a machine which runs for ever with no addional input of energy.

It doesn't really matter as long as there are a sufficient number of people, who are prepared to be open-minded about Bessler's claims, to carry on and maintain research into his machine with the aim of discovering the secret of its construction, and to my mind the information available in Bessler's books holds the best hope of success. But what is puzzling me is the sudden drop in orders for my books, allied to the apparent decrease in the number of new members of the Besslerwheel forum - and the fall in the number of posts. I'm not concerned at the fall in income from the sale of books, that only ever helped to recoup some of the cost of translations I had had done over the years, plus of course ongoing costs in running the web sites and doing further research. Even if I got no further income from book sales I would continue with my research. But this seems to indicate a fall in interest.

But why is it that the public interest in Bessler's wheel seems to be disappearing? What has changed? If anything I would have thought that there would be renewed interest as well as more newcomers to the subject. There is so much discussion about the need for a new way of generating electricity; so many adverts around the world by governments desperate to solve the problem of escalating oil prices, and reductions in carbon emissions and the lack of any real alternative to be worthy of consideration ... that I cannot understand the sudden flack of interest.

To me the only answer is to try to spread the word about Bessler's wheel as a potential energy generating device, more widely. But I have tried to spread the word for the last few years with little success. I think something more dramatic is neeeded which will grab everyone's attention. Of course the one thing that would do that would be the announcement of a new device based on Bessler's wheel and that is our ultimate aim, but in case that does not happen in the very near future something else is needed, in order to bring more new amateur researchers into this field of research.

The solution may appear next week or not for ten years or longer, so the sooner the public gets involved the better - and the sooner the wheel will appear.

So all suggestions welcomed for discussion here, but try to keep it legal guys! LOL

JC

Words of Encouragement

It seems to me that we who try to solve the mystery of Bessler's wheel, seem to have lost our way a bit, lately. Maybe we should return to what originally attracted our attention and caused us to consider the possibility that a method could be found of driving a revolving wheel by the use of gravity.

Remember that on 6th July 1712, Johann Bessler, also known as Orffyreus, claimed that he had invented a wheel which would turn continuously powered only by gravity. As proof, he exhibited a working model - something none of us has achieved to date.

I have provided as much information as I have been able to find in 30 year's research - the most complete biography of Bessler to date, books by Bessler with English translations, letters by him and about him and to him, drawings by him, descriptions of his encoded clues compete with my interpretations of what he meant. I have done this to draw attention to Bessler's claims and I have updated version of the original book almost ready for publication but I don't want to release it because I feel that the solution is about to appear and I would like to include any new information relating to the new discovery - however......

...it seems as if every year at this time we think, optimistically, that the answer will magically appear next year - but I have seen this written here every year for the last several years - I've posted such optimistic forecasts myself - but so far nothing. I think that there is a desire to believe that, with the 300th anniversary of the first announcement of his discovery looming, the time is ripe for the return of Bessler's wheel, and so it is, but it won't neccessarily happen just because the time is right.

Our thoughts need to return to basics, in my opinion. The more complex the design the more there is to go wrong. Bessler was hugely concerned that people would think his machine too simple to be worth what he was asking for it and argued strongly that despite its simplicity of design it was worth every penny.

So stick to basics, keep it simple and build a working model! Let's make the 300th anniversary a real celebration with a working model! Easy-peasy!

HAPPY CHRISTMAS ALL!

JC

Don't patent Bessler's wheel!

Over the years I have questioned the prudence of patenting an invention such as Bessler's wheel. After much deliberation I eventually came to the conclusion that if I was fortunate enough to succeed in building my own version of the wheel, I wouldn't patent it.

I know the subject has been discussed numerous times on the besslerwheel forum and I'm aware of the current opinions being aired, but I was delighted to receive an email from a regular correspondent who directed my attention to a book called, "DON’T File a Patent!" by John D. Smith (Smith Press, 200 pages, $24.95) . I'm not saying I agree with the bombastic tone of the chapter headings and I haven't even read the book, but the concept struck a chord with me and I was pleased to note that I am not alone in questioning the validity of the argument that the right course is, necessarily, to patent.

Some people have ascribed my decision not to patent, to ethical or moral values, but that is not the whole picture. I do in fact believe that this particular invention, if it were successful, should be freely available and without let or hindrance (by which I mean,without anyone or any organisation, having the right to prevent anyone else from building, using, selling or in any other way benefiting from it, however they wish.)

No, there are other reasons why I am sceptical of patenting. One is that in the first place it is costly - enormously so.  Yes of course I know that the costs of such an invention could be recouped a million times over, but this is a cost that grows with time, as you try to cover international patents and their annual fees.  The sheer amount of paperwork would be more than enough to defeat my enthusiasm.  But it is not the cost alone which causes me concern.

There is the policing of the patent. No patent office bothers to protect your patent, they only issue them. You have to consider whether it is worth taking every infringement to court; such an invention will attract every fly-by-night operator in the world, every far Eastern fabricating engineer trying to make a living; every one, in fact, who is looking for ways and means of feeding his family. Would you wish to act against everyone of them? A patent won't protect you against these. You might decide to just take legal action against the big boys but they will have done their homework and even if you win, you will have spent time and money you'd rather not and maybe you won't win.

But there is one more issue concerning infringement which I believe has not been considered or if it has, it has been ignored, and that is the psychological and physical impact experienced in defending your patent; no one seems to consider patent infrinegements other than as a legal challenge but I know, for myself at least, that it would be very distressing and also alarming and irritating to fight a continual battle against those who would try to circumvent your patent.

But these issues are nothing compared to the distinct possibility that your concerned government might see fit to step in and forbid your patent, and tie you up in legal bonds which would prevent you even talking about your device. Then where would the value of your patent lie? The important thing to consider is this; you apply for a patent to protect your invention, and presumably you do this for one or two reasons. Firstly you want to earn some money to secure you and your family's future; nothing wrong in that. Secondly you wish to preserve some control over how it is used. Again a reasonable intent. But if you lose the patent through governent inteference, where's the security in that? Who would control it then? It seems to me that if there is even the slightest possibility of that happening, then you must forget patenting your invention.

So it's no to patenting Bessler's wheel - what then? You publish the details of how it works through newspapers, TV and of course the intenet. There will be enough interest generated to make many of the world's media companies rush to your door and make attractive financial offers to you for your story. This prospect might not seem desirable but do you think that, even in the case where you did apply for and did receive a patent, and the governments around the world welcomed it with open arms, that the media won't make the same concerted rush for your door? Of course they will.

So if you are lucky enough to have to make a choice, my advice would be to give it away and let market forces do their thing. 

JC

Is this really the only alternative to fossil fuels?

How frustrating it is to come across web sites like the one below!

"Generate your own energy!

Renewable energy technologies like wind turbines, solar panels and biomass heaters offer an alternative to fossil fuels and can help reduce your homes CO2 emissions.

There are financial benefits too. Investing in a renewable energy technology now basically means pre-buying energy at today’s prices for a future where energy may cost a lot more. If fuel prices rise, your pay back would happen even sooner."

The above exhortation comes from http://www.energysavingtrust.org.uk/, but there are dozens - probably hundreds or even thousands of similar schemes around the world. They urge us to buy into these wonderful-sounding solutions as if they are the answer to the energy crisis - but they aren't - they barely scratch the surface of the problem - but the most frustrating thing about them is that even though there is a real solution - Bessler's gravitywheel - they dismiss it, ignore it or they don't know about it (or they don't want to know about it!).

The world of science has long scoffed at the possibility of running a wheel driven continuously by the force of gravity, and it will take a sea-change in thinking to make someone somewhere sit up and take notice - or a working model!

It's been done before so we know beyond reasonable doubt that gravitywheels are possible. Johann Bessler achieved it and first demonstrated it on 6th July, 1712. In less than two years time it will be the 300th anniversary of that day. I am determined to celebrate the occasion with a complete working reconstruction of the gravitywheel that Johann Bessler invented, if not by me then by someone - anyone!  And.....

...despite temperatures of -8 degrees Celsius (about 17 degrees Fahrenheit) during most of the last two weeks, I have managed to do some work on my current construction of a Bessler wheel model, and regardless of previous experience, I dare say, confidence is high!
JC

Addition to www.theorffyreuscode.com

Following some serendipitous studies I found what I believe is an interesting piece of information regarding MT 137 - but only for those who relish the code-breaking requirements of Bessler's  tortuous coded constructions.  It doesn't shed any more light upon the meaning of MT 137, but for me it confirms what I have always thought - that the drawing is only intended to be another secret pointer to the number 5.

I have added yet another page to the http://www.theorffyreuscode.com/ web site and an extra button MT 137 C!  I have slightly altered MT 137 A, and MT 137 B although I doubt anyone will notice the difference.  I'm not posting anything on BW forum because I don't think anyone is particularly interested.  That's not sour grapes, its just the way it is.  I don't think that repetitive revelations that yet another piece of code appears to suggest the number 5 will light anyone's fire, not even mine, but I do have an interest in all things Bessler and I am constantly intrigued to find new layers of meaning within his writing/drawing.

The only thing I would say is that after all these discoveries relating to the number 5, I must admit that I am perplexed at the ubiquity of it and concerned that something so apparently important to Bessler should be ignored simply because there is so much of it.

JC