Thursday, 12 April 2012
I've been actively persuing the solution to Bessler's wheel for many years but I haven't felt it necessary to publish pictures of the many, many failed models I've made over a number of years.
To be honest I would be ashamed to put them on public display given the professional-looking models I see other people post. Mine are made out of pieces of MDF, used and reused over and over again until they are so full of holes I fear that they will fall apart; pieces of mild steel amd aluminium; stiff-nuts so used and reused that they are no longer capable of holding fast; some bolts cross-threaded so I have to clamp them in a pair of pliers and force the nuts round to get them past the crossed threads; weights of various materials, mostly pieces sawn from a mild steel bar, or bunches of steel or lead washers; levers of mild steel only a quarter of an inch wide or thicker pieces of aluminium and also so full of holes that they too are fast approaching their demise.
The axle is a length of screwed thread with two nuts on it clamping the MDF sheet. This rests in a couple of plastic fixings meant to hold copper plumbing pipes to the wall, which are screwed onto two upright wooden pillars which in turn are screwed to a base board - it works, don't knock it!
So, do I buy more new material and set to work again building and rebuilding new designs? Or do I just share what I know and hope that someone else finds something useful in my work and goes on to achieve the success I looked for?
In a way this is an 'aha' moment a small revelation, because if I do share what I know, instead of having to continue to build I can just keep posting my ideas here and let someone else do the work! No contest! But I'll just finish this last model.
I’ve decided to go back to my original plan which was to share everything I’ve discovered and know, or believe about Bessler’s wheel. It ha...
When someone finds the solution to Bessler’s wheel I don’t know how, or even if, it will affect the world we live in, but I do know that con...
Some people who visit this blog may be tempted to dismiss our whole raison d'être because they don’t know why we might even wish to be ...
I have always believed that Bessler’s wheel was genuine and it was enabled to turn by the action of gravity upon the weights inside. This i...